Re: Request for info on Fairchild 24

[james chybicki]

' I have a very odd radial mount I received with a lot purchase of wrecked Fairchild parts. Let me gets some pictures and send to you.Jim CUC-61K

On Friday, March 29, 2019, 12:28:28 PM CDT, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]




'

[Eric Goss]

'Kosola (sp?) had the STC.  They were sold to another fabricator whose name I can’t recall right now (but it will come to me, and I’ll send it to you).  I contacted the purchasing company and learned that there is no index to the Kosola drawings - they were all filed by date.  So somebody has to go through them and find the mount drawings; they were not willing to do it themselves, but they didn’t invite me to do it, either.  
As far as I can tell, the options are to pursue a one time STC or to get the purchaser to give one of us access to the old Kosola drawings.

Eric Goss865-361-0259

On Mar 29, 2019, at 1:28 PM, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]





'

[Eric Goss]

'Jim, 
Could you send the pictures to me, too?

Eric Goss865-361-0259

On Mar 29, 2019, at 4:32 PM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
I have a very odd radial mount I received with a lot purchase of wrecked Fairchild parts. Let me gets some pictures and send to you.Jim CUC-61K

On Friday, March 29, 2019, 12:28:28 PM CDT, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]





'

[Buster]

'Look forward to seeing those picturesBuster

Sent from my iPad

On Mar 29, 2019, at 3:32 PM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
I have a very odd radial mount I received with a lot purchase of wrecked Fairchild parts. Let me gets some pictures and send to you.Jim CUC-61K

On Friday, March 29, 2019, 12:28:28 PM CDT, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]





'

[Buster]

'Thanks Eric!  Serv-aero is who made most mounts but they are not supporting that STC any longer. I was able to borrow a mount from Don Sanders in mustang Ok.  I have the jig built but am lacking in enthusiasm so before I started I thought I would put the word out and possibly find one laying around after all there were 18 mounts made ( needle in a hay stack sort of thing) I was able to obtain all the STC paperwork and drawings for another flying 24 so shouldn't be much of a problem getting a field approval.Don has 2 F24's both have serv-aero mounts both cowled and mounted different. One is mostly Waco upf-7 so I am also looking for UPF-7 dishpan and exaust. I have a new bump cowl. Mine is a 1937

Sent from my iPad

On Mar 29, 2019, at 4:07 PM, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Kosola (sp?) had the STC.  They were sold to another fabricator whose name I can’t recall right now (but it will come to me, and I’ll send it to you).  I contacted the purchasing company and learned that there is no index to the Kosola drawings - they were all filed by date.  So somebody has to go through them and find the mount drawings; they were not willing to do it themselves, but they didn’t invite me to do it, either.  
As far as I can tell, the options are to pursue a one time STC or to get the purchaser to give one of us access to the old Kosola drawings.

Eric Goss865-361-0259
On Mar 29, 2019, at 1:28 PM, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]






'

[Eric Goss]

'It took me a bit to find it: Kosola & Associates was purchased by Aerospace Welding in Minneapolis.

Eric Goss865-361-0259

On Mar 29, 2019, at 6:17 PM, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Thanks Eric!  Serv-aero is who made most mounts but they are not supporting that STC any longer. I was able to borrow a mount from Don Sanders in mustang Ok.  I have the jig built but am lacking in enthusiasm so before I started I thought I would put the word out and possibly find one laying around after all there were 18 mounts made ( needle in a hay stack sort of thing) I was able to obtain all the STC paperwork and drawings for another flying 24 so shouldn't be much of a problem getting a field approval.Don has 2 F24's both have serv-aero mounts both cowled and mounted different. One is mostly Waco upf-7 so I am also looking for UPF-7 dishpan and exaust. I have a new bump cowl. Mine is a 1937

Sent from my iPad
On Mar 29, 2019, at 4:07 PM, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Kosola (sp?) had the STC.  They were sold to another fabricator whose name I can’t recall right now (but it will come to me, and I’ll send it to you).  I contacted the purchasing company and learned that there is no index to the Kosola drawings - they were all filed by date.  So somebody has to go through them and find the mount drawings; they were not willing to do it themselves, but they didn’t invite me to do it, either.  
As far as I can tell, the options are to pursue a one time STC or to get the purchaser to give one of us access to the old Kosola drawings.

Eric Goss865-361-0259
On Mar 29, 2019, at 1:28 PM, Buster bt13bc@yahoo.com [fairchildclub] wrote:

 
Any one know of a 220 continental engine mount for a Fairchild 24

Sent from my iPad
On Mar 29, 2019, at 8:29 AM, james chybicki rampratone@yahoo.com [fairchildclub] wrote:

 
KarlWe have our UC-61K (F24R) just outside Chicago at Clow Airport in Bollingbrook IL.Let me know if this helps you out
Jim CRampRatOne-at-yahoo-dot-com


On Friday, March 29, 2019, 6:43:14 AM CDT, Eric Goss ericgoss@comcast.net [fairchildclub] wrote:

 
Karl, I’ve got an F24 project stored in South Bend.  The interior is in place, so you could get an accurate assessment of your fit.  Text me if you’d like to check it out.

Eric Goss865-361-0259
On Mar 29, 2019, at 6:09 AM, Karl A Vogelheim amigarules@hotmail.com [fairchildclub] wrote:

 
Tony,     That is a little farther than I was hoping for but I will see what I can arrange.   What I am hoping to see is how well I fit in the cabin.  If I am going to be in a slower airplane I want to be comfortable and I am a little bit cramped in my Stinson.  So if the F24 cabin is a little bit taller, that might make all the difference and tip me into looking for a Fairchild.
Sent from my Sprint Phone.
------ Original message------ From: lowea1@comcast.net [fairchildclub] Date: Fri, Mar 29, 2019 02:08 To: fairchildclub@yahoogroups.com; Cc: Subject:RE: [fairchildclub] Re: Request for info on Fairchild 24
 
I’m in Minneapolis with a Warner F24W41-A. Is that close enough? What about the 24 do you want to see?

Tony

From: fairchildclub@yahoogroups.com
Sent: Thursday, March 28, 2019 2:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Request for info on Fairchild 24

Is there anyone with a Fairchild 24 in the Great Lakes area that would let me see their airplane?

[Non-text portions of this message have been removed]







'