Re: Camshaft help

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
looping.jp@voila.fr
Posts: 3
Joined: Sat Feb 19, 2011 7:11 am

Camshaft help

Post by looping.jp@voila.fr »

'Hi,
http://img577.imageshack.us/img577/2624/p1100883.jpg
I assemble my Ranger engine after a important check, and I would like to known the limit of wear of my camshaft. (see join picture)
I have the table of limits but I don't know how to calculate the wear.
Thanks for your help
J-Pierre, UC61K F-AZCI'
Top
Mike Danielle
Posts: 39
Joined: Fri Feb 18, 2005 8:21 pm

Re: Camshaft help

Post by Mike Danielle »

'Use a Plasti-Gauge. Google it.


Ranger Mike

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of looping.jp@voila.fr
Sent: Saturday, January 21, 2012 7:20 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Camshaft help

Hi,
http://img577.imageshack.us/img577/2624/p1100883.jpg
I assemble my Ranger engine after a important check, and I would like to
known the limit of wear of my camshaft. (see join picture)
I have the table of limits but I don't know how to calculate the wear.
Thanks for your help
J-Pierre, UC61K F-AZCI



------------------------------------

Yahoo! Groups Links'
Top
Jim higham
Posts: 29
Joined: Thu Apr 15, 2010 9:22 am

Re: Camshaft help

Post by Jim higham »

'.001-.003 clearance on the journals for the housing and the bushing with a inservice limit of .006 for the bushing, none on the lobes. Lobs measure .005 lift, heal ends at 15 degrees before top center and begins at 65 degrees after bottom center for the intake, heal ends at 70 degees before bottom center and begins 30 degrees after top center for the exhaust.


________________________________
From: "looping.jp@voila.fr"
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 21, 2012 9:20 AM
Subject: [fairchildclub] Camshaft help


 
Hi,
http://img577.imageshack.us/img577/2624/p1100883.jpg
I assemble my Ranger engine after a important check, and I would like to known the limit of wear of my camshaft. (see join picture)
I have the table of limits but I don't know how to calculate the wear.
Thanks for your help
J-Pierre, UC61K F-AZCI




[Non-text portions of this message have been removed]'
Top
looping.jp@voila.fr
Posts: 3
Joined: Sat Feb 19, 2011 7:11 am

Re: Camshaft help

Post by looping.jp@voila.fr »

'Hi,
Many thanks for your helps
J-Pierre, UC61K F-AZCI
--- In fairchildclub@yahoogroups.com, Jim Higham wrote:
>
> .001-.003 clearance on the journals for the housing and the bushing with a inservice limit of .006 for the bushing, none on the lobes. Lobs measure .005 lift, heal ends at 15 degrees before top center and begins at 65 degrees after bottom center for the intake, heal ends at 70 degees before bottom center and begins 30 degrees after top center for the exhaust.
>
>
> ________________________________
> From: "looping.jp@..."
> To: fairchildclub@yahoogroups.com
> Sent: Saturday, January 21, 2012 9:20 AM
> Subject: [fairchildclub] Camshaft help
>
>
>  
> Hi,
> http://img577.imageshack.us/img577/2624/p1100883.jpg
> I assemble my Ranger engine after a important check, and I would like to known the limit of wear of my camshaft. (see join picture)
> I have the table of limits but I don't know how to calculate the wear.
> Thanks for your help
> J-Pierre, UC61K F-AZCI
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
Cy Galley
Posts: 112
Joined: Mon Dec 24, 2001 11:27 am

Re: Camshaft help

Post by Cy Galley »

'Lift sounds a little small at .005



From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of looping.jp@voila.fr
Sent: Sunday, January 22, 2012 12:52 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Camshaft help





Hi,
Many thanks for your helps
J-Pierre, UC61K F-AZCI

--- In fairchildclub@yahoogroups.com
, Jim Higham
wrote:
>
> .001-.003 clearance on the journals for the housing and the bushing with a
inservice limit of .006 for the bushing, none on the lobes. Lobs measure
.005 lift, heal ends at 15 degrees before top center and begins at 65
degrees after bottom center for the intake, heal ends at 70 degees before
bottom center and begins 30 degrees after top center for the exhaust.
>
>
> ________________________________
> From: "looping.jp@..."
> To: fairchildclub@yahoogroups.com

> Sent: Saturday, January 21, 2012 9:20 AM
> Subject: [fairchildclub] Camshaft help
>
>
> Â
> Hi,
> http://img577.imageshack.us/img577/2624/p1100883.jpg
> I assemble my Ranger engine after a important check, and I would like to
known the limit of wear of my camshaft. (see join picture)
> I have the table of limits but I don't know how to calculate the wear.
> Thanks for your help
> J-Pierre, UC61K F-AZCI
>
>
>
>
> [Non-text portions of this message have been removed]
>




[Non-text portions of this message have been removed]'
Top
Post Reply

Return to “Yahoo Group Archives”