'Looking for two F24 3-1/2" diameter flap pullies part # A114 and one usable Imperial fuel valve. Anyone out there have some extras?
Thanks
Rich Seifert 909-790-1320
[Non-text portions of this message have been removed]'
Re: F24 Parts needed
F24 Parts needed
Restoring an 1937 F24H model Fairchild
-
- Posts: 67
- Joined: Wed Oct 21, 2009 10:56 am
Re: F24 Parts needed
'McFarlane Aviation has pulleys available. They have a great pulley chart on their website. Hope this helps.
Jim
McFarlane Aviation http://www.mcfarlane-aviation.com/'
Jim
McFarlane Aviation http://www.mcfarlane-aviation.com/'
Re: F24 Parts needed
'Great website Jim! Looks like a NAS383-4 pully is identical to the A-114. Will confirm this with McFarlane on monday.
Thanks Loads
Rich Seifert
Thanks Loads
Rich Seifert
'----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 1:48 PM
Subject: [fairchildclub] Re: F24 Parts needed
McFarlane Aviation has pulleys available. They have a great pulley chart on their website. Hope this helps.
Jim
McFarlane Aviation http://www.mcfarlane-aviation.com/
[Non-text portions of this message have been removed]
Restoring an 1937 F24H model Fairchild
-
- Posts: 67
- Joined: Wed Oct 21, 2009 10:56 am
Re: F24 Parts needed
'Richard,
I have two fuel shut off valves for the F-24. I sent you an email.
Jim'
I have two fuel shut off valves for the F-24. I sent you an email.
Jim'
Re: F24 Parts needed
'Hi Jim
I really only need one valve but if you want to sell them both I'm interested. You can reach me at 909-790-1320 or my E-mail address is seifertr@verizon.net
Thanks
Rich Seifert
I really only need one valve but if you want to sell them both I'm interested. You can reach me at 909-790-1320 or my E-mail address is seifertr@verizon.net
Thanks
Rich Seifert
'----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 5:19 PM
Subject: [fairchildclub] Re: F24 Parts needed
Richard,
I have two fuel shut off valves for the F-24. I sent you an email.
Jim
[Non-text portions of this message have been removed]
Restoring an 1937 F24H model Fairchild
Re: F24 Parts needed
'Hi Jim
The F-24 fuel valves arrived today and they look to be rebuildable, unfortunately they are too small for my bird. They are 1/4" valves probably for an early F-24. My bird requires 5/16" valves. I currently do not have a use for these valves, so I'll send them back with postage. I may be picking up an early F-24 in the future, so I will keep your name & number in case that works out. Thanks for letting me check them out, and thanks for the McFarlane pully tip. The new pullys are supposed to be here tomorrow.
The valves should be back in the mail today. Thank You Jim.
Rich Seifert
The F-24 fuel valves arrived today and they look to be rebuildable, unfortunately they are too small for my bird. They are 1/4" valves probably for an early F-24. My bird requires 5/16" valves. I currently do not have a use for these valves, so I'll send them back with postage. I may be picking up an early F-24 in the future, so I will keep your name & number in case that works out. Thanks for letting me check them out, and thanks for the McFarlane pully tip. The new pullys are supposed to be here tomorrow.
The valves should be back in the mail today. Thank You Jim.
Rich Seifert
'----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 5:19 PM
Subject: [fairchildclub] Re: F24 Parts needed
Richard,
I have two fuel shut off valves for the F-24. I sent you an email.
Jim
[Non-text portions of this message have been removed]
Restoring an 1937 F24H model Fairchild
-
- Posts: 67
- Joined: Wed Oct 21, 2009 10:56 am
Re: F24 Parts needed
'Hi Richard,
I received the valves back today. Thanks for the $5.20.
Jim'
I received the valves back today. Thanks for the $5.20.
Jim'