Re: F24 Parts needed

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
Seifert
Posts: 85
Joined: Tue May 12, 2020 1:33 pm
Location: Yucaipa,CA

F24 Parts needed

Post by Seifert »

'Looking for two F24 3-1/2" diameter flap pullies part # A114 and one usable Imperial fuel valve. Anyone out there have some extras?
Thanks
Rich Seifert 909-790-1320

[Non-text portions of this message have been removed]'
Restoring an 1937 F24H model Fairchild
mileslong2k
Posts: 67
Joined: Wed Oct 21, 2009 10:56 am

Re: F24 Parts needed

Post by mileslong2k »

'McFarlane Aviation has pulleys available. They have a great pulley chart on their website. Hope this helps.

Jim

McFarlane Aviation http://www.mcfarlane-aviation.com/'
Seifert
Posts: 85
Joined: Tue May 12, 2020 1:33 pm
Location: Yucaipa,CA

Re: F24 Parts needed

Post by Seifert »

'Great website Jim! Looks like a NAS383-4 pully is identical to the A-114. Will confirm this with McFarlane on monday.
Thanks Loads
Rich Seifert
----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 1:48 PM
Subject: [fairchildclub] Re: F24 Parts needed





McFarlane Aviation has pulleys available. They have a great pulley chart on their website. Hope this helps.

Jim

McFarlane Aviation http://www.mcfarlane-aviation.com/





[Non-text portions of this message have been removed]
'
Restoring an 1937 F24H model Fairchild
mileslong2k
Posts: 67
Joined: Wed Oct 21, 2009 10:56 am

Re: F24 Parts needed

Post by mileslong2k »

'Richard,
I have two fuel shut off valves for the F-24. I sent you an email.

Jim'
Seifert
Posts: 85
Joined: Tue May 12, 2020 1:33 pm
Location: Yucaipa,CA

Re: F24 Parts needed

Post by Seifert »

'Hi Jim
I really only need one valve but if you want to sell them both I'm interested. You can reach me at 909-790-1320 or my E-mail address is seifertr@verizon.net
Thanks
Rich Seifert
----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 5:19 PM
Subject: [fairchildclub] Re: F24 Parts needed




Richard,
I have two fuel shut off valves for the F-24. I sent you an email.

Jim






[Non-text portions of this message have been removed]
'
Restoring an 1937 F24H model Fairchild
Seifert
Posts: 85
Joined: Tue May 12, 2020 1:33 pm
Location: Yucaipa,CA

Re: F24 Parts needed

Post by Seifert »

'Hi Jim
The F-24 fuel valves arrived today and they look to be rebuildable, unfortunately they are too small for my bird. They are 1/4" valves probably for an early F-24. My bird requires 5/16" valves. I currently do not have a use for these valves, so I'll send them back with postage. I may be picking up an early F-24 in the future, so I will keep your name & number in case that works out. Thanks for letting me check them out, and thanks for the McFarlane pully tip. The new pullys are supposed to be here tomorrow.
The valves should be back in the mail today. Thank You Jim.
Rich Seifert
----- Original Message -----
From: mileslong2k
To: fairchildclub@yahoogroups.com
Sent: Saturday, January 14, 2012 5:19 PM
Subject: [fairchildclub] Re: F24 Parts needed




Richard,
I have two fuel shut off valves for the F-24. I sent you an email.

Jim






[Non-text portions of this message have been removed]
'
Restoring an 1937 F24H model Fairchild
mileslong2k
Posts: 67
Joined: Wed Oct 21, 2009 10:56 am

Re: F24 Parts needed

Post by mileslong2k »

'Hi Richard,
I received the valves back today. Thanks for the $5.20.

Jim'
Post Reply