Re: Ranger oil lines and filter

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
F.J. & D.A. Cox
Posts: 32
Joined: Tue Apr 08, 2008 2:12 pm

Ranger oil lines and filter

Post by F.J. & D.A. Cox »

'I am having to replace a couple of the 1" and all of the 3/4" oil lines due
to previous fretting on the engine mount by the look of it and many 'Bodged'
repairs.

The only drawing on the CD (48640) that shows the lines is not very clear
when it comes to the material specification.

Does anybody know the aluminium specification for these lines please? and
would it be worth fitting a remote oil filter - I personally am keen to fit
one but am very happy to hear other opinions. I was looking at an Airwolf
one that clamps to the engine mount like this
http://www.airwolf.com/images/Installations/NA_Rockwell_AT6D-5NJ-5_Front.jpg
but with a standard Champion filter. However there will be the small matter
of approval! - No 337s here in UK.

Many thanks

Frank Cox'
Top
Jack Threadgill
Posts: 76
Joined: Mon May 12, 2008 7:35 pm

Re: Ranger oil lines and filter

Post by Jack Threadgill »

'Frank, I have installed the AirWolf Filter Adaptors on my Barron and I have
been very happy with them.



Jack



Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net





From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of F.J. & D.A. Cox
Sent: Monday, July 18, 2011 11:36 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Ranger oil lines and filter





I am having to replace a couple of the 1" and all of the 3/4" oil lines due
to previous fretting on the engine mount by the look of it and many 'Bodged'

repairs.

The only drawing on the CD (48640) that shows the lines is not very clear
when it comes to the material specification.

Does anybody know the aluminium specification for these lines please? and
would it be worth fitting a remote oil filter - I personally am keen to fit
one but am very happy to hear other opinions. I was looking at an Airwolf
one that clamps to the engine mount like this
http://www.airwolf.com/images/Installations/NA_Rockwell_AT6D-5NJ-5_Front.jpg

but with a standard Champion filter. However there will be the small matter
of approval! - No 337s here in UK.

Many thanks

Frank Cox





[Non-text portions of this message have been removed]'
Top
Jack Threadgill
Posts: 76
Joined: Mon May 12, 2008 7:35 pm

Re: Ranger oil lines and filter

Post by Jack Threadgill »

'Sorry! Baron



Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net





From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Jack Threadgill
Sent: Monday, July 18, 2011 9:44 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Ranger oil lines and filter





Frank, I have installed the AirWolf Filter Adaptors on my Barron and I have
been very happy with them.

Jack

Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com
]
On Behalf Of F.J. & D.A. Cox
Sent: Monday, July 18, 2011 11:36 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Ranger oil lines and filter

I am having to replace a couple of the 1" and all of the 3/4" oil lines due
to previous fretting on the engine mount by the look of it and many 'Bodged'

repairs.

The only drawing on the CD (48640) that shows the lines is not very clear
when it comes to the material specification.

Does anybody know the aluminium specification for these lines please? and
would it be worth fitting a remote oil filter - I personally am keen to fit
one but am very happy to hear other opinions. I was looking at an Airwolf
one that clamps to the engine mount like this
http://www.airwolf.com/images/Installations/NA_Rockwell_AT6D-5NJ-5_Front.jpg

but with a standard Champion filter. However there will be the small matter
of approval! - No 337s here in UK.

Many thanks

Frank Cox

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]'
Top
Post Reply

Return to “Yahoo Group Archives”