Re: Engine question

[Charley Humphrey]

'Does anyone know where I may find an American Cirrus engine or Wright
Gypsy (to complete a project)? Any hints at all will be greatly
appreciated.
Thanks
Charley'

[John Berendt]

'They are not arable at any price I do not know if any exist.What is the
project you are working on?

John Berendt
Fairchild Club

----- Original Message -----
From: "Charley Humphrey"
To:
Sent: Saturday, September 10, 2005 12:08 PM
Subject: [fairchildclub] Engine question


> Does anyone know where I may find an American Cirrus engine or Wright
> Gypsy (to complete a project)? Any hints at all will be greatly
> appreciated.
> Thanks
> Charley
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[WILLIAM SPRIGGS]

'Dear John: We are doing another Ranger and I was following the article in Technical Topics by Ed Wegner that indicated Perfect Circle Seals (12-2014) were to be used on the intakes. I don't recall any seals when I disassembled the engine. I tried to call Ed, but could not reach him. Maybe no seals are needed, who would know? Thanks for your help. Bill Spriggs

----- Original Message -----
From: John Berendt
To: fairchildclub@yahoogroups.com
Sent: Sunday, September 11, 2005 6:08 PM
Subject: Re: [fairchildclub] Engine question


They are not arable at any price I do not know if any exist.What is the
project you are working on?

John Berendt
Fairchild Club
----- Original Message -----
From: "Charley Humphrey"
To:
Sent: Saturday, September 10, 2005 12:08 PM
Subject: [fairchildclub] Engine question


> Does anyone know where I may find an American Cirrus engine or Wright
> Gypsy (to complete a project)? Any hints at all will be greatly
> appreciated.
> Thanks
> Charley
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





Yahoo! Groups Links








[Non-text portions of this message have been removed]

'

[Charley Humphrey]

'An old Great Lakes.

--- In fairchildclub@yahoogroups.com, "John Berendt"
wrote:

> They are not arable at any price I do not know if any exist.What is

the

> project you are working on?
>
> John Berendt
> Fairchild Club
> ----- Original Message -----
> From: "Charley Humphrey"
> To:
> Sent: Saturday, September 10, 2005 12:08 PM
> Subject: [fairchildclub] Engine question
>
>
> > Does anyone know where I may find an American Cirrus engine or

Wright

> > Gypsy (to complete a project)? Any hints at all will be greatly
> > appreciated.
> > Thanks
> > Charley
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >

'

[Jamie S. Treat]

'Bill,

Seals were not stock.

I just purchased some for stock and Karl in Switzerland. All the part
numbers referenced in the letters are superceded. I will get the latest and
respond tonight.

They dry up the engine some, not required, but can't hurt.

Jamie

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com

----- Original Message -----
From: "WILLIAM SPRIGGS"
To:
Sent: Monday, September 12, 2005 8:53 AM
Subject: Re: [fairchildclub] Engine question


> Dear John: We are doing another Ranger and I was following the article in
> Technical Topics by Ed Wegner that indicated Perfect Circle Seals
> (12-2014) were to be used on the intakes. I don't recall any seals when I
> disassembled the engine. I tried to call Ed, but could not reach him.
> Maybe no seals are needed, who would know? Thanks for your help. Bill
> Spriggs
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, September 11, 2005 6:08 PM
> Subject: Re: [fairchildclub] Engine question
>
>
> They are not arable at any price I do not know if any exist.What is the
> project you are working on?
>
> John Berendt
> Fairchild Club
> ----- Original Message -----
> From: "Charley Humphrey"
>
> To:
> Sent: Saturday, September 10, 2005 12:08 PM
> Subject: [fairchildclub] Engine question
>
>
> > Does anyone know where I may find an American Cirrus engine or Wright
> > Gypsy (to complete a project)? Any hints at all will be greatly
> > appreciated.
> > Thanks
> > Charley
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

'

[Jamie S. Treat]

'Bill,

Here is the latest P/N info for the valve stem seals.

Victor Reinz
P/N B45763
Package of 8

Jamie

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com

----- Original Message -----
From: "WILLIAM SPRIGGS"
To:
Sent: Monday, September 12, 2005 8:53 AM
Subject: Re: [fairchildclub] Engine question


> Dear John: We are doing another Ranger and I was following the article in
> Technical Topics by Ed Wegner that indicated Perfect Circle Seals
> (12-2014) were to be used on the intakes. I don't recall any seals when I
> disassembled the engine. I tried to call Ed, but could not reach him.
> Maybe no seals are needed, who would know? Thanks for your help. Bill
> Spriggs
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, September 11, 2005 6:08 PM
> Subject: Re: [fairchildclub] Engine question
>
>
> They are not arable at any price I do not know if any exist.What is the
> project you are working on?
>
> John Berendt
> Fairchild Club
> ----- Original Message -----
> From: "Charley Humphrey"
>
> To:
> Sent: Saturday, September 10, 2005 12:08 PM
> Subject: [fairchildclub] Engine question
>
>
> > Does anyone know where I may find an American Cirrus engine or Wright
> > Gypsy (to complete a project)? Any hints at all will be greatly
> > appreciated.
> > Thanks
> > Charley
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

'