Re: F24R46 Wheel Wanted

Tom Mueller · Post by **Tom Mueller** » Wed Dec 15, 2004 10:44 am

'Hey group,
Recently had both front wheels off. Took them to a machine shop to
have them turned down a little, just to clean 'em up, square 'em up.
One had a wobble. Not alot, but I'd like to check on replacing it.
Anybody have a servicable unit, or know of one.
Tom
Hanford,Ca'

Buell Powell · Post by **Buell Powell** » Thu Dec 16, 2004 8:38 am

'Tom,
I have an extra wheel. It has the triangle shaped holes (the set I
have on my Fairchild now has round holes) Stamped on it is Model no. 752A
and wheel assembly 73A. It looks good but needs to be cleaned up-and the
drums need to be turned and checked. Let me know if it is what you need.
Buell Powell

----- Original Message -----
From: "Tom Mueller"
To:
Sent: Wednesday, December 15, 2004 10:44 AM
Subject: [fairchildclub] F24R46 Wheel Wanted

>
>
> Hey group,
> Recently had both front wheels off. Took them to a machine shop to
> have them turned down a little, just to clean 'em up, square 'em up.
> One had a wobble. Not alot, but I'd like to check on replacing it.
> Anybody have a servicable unit, or know of one.
> Tom
> Hanford,Ca
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

'

Tom Mueller · Post by **Tom Mueller** » Fri Dec 17, 2004 1:02 am

'Thanks Buell,
I've since mounted the pair,and put the fenders back on. I'll see if
I can get the number off of them. I'll get back to you. Ok!
I took about .010 thousands off, it made a world of difference.
They used to get warm on the taxi out, which made 'em get even
hotter, tighter, on their own. It was getting to be a real problem.
Tom'

longmere2 · Post by **longmere2** » Fri Mar 25, 2005 10:03 am

'I have a set, but they are back in Alaska. I won't be heading back
up until mid May.
--- In fairchildclub@yahoogroups.com, "Tom Mueller"
wrote:

>
> Hey group,
> Recently had both front wheels off. Took them to a machine shop to
> have them turned down a little, just to clean 'em up, square 'em

up.

> One had a wobble. Not alot, but I'd like to check on replacing it.
> Anybody have a servicable unit, or know of one.
> Tom
> Hanford,Ca

'

Tom Downey · Post by **Tom Downey** » Sat Mar 26, 2005 7:37 pm

'

> > Anybody have a servicable unit, or know of one.
> > Tom
> > Hanford,Ca

See E-Bay Item number: 4538970833'