Re: PT-23 Elevator hinge brackets

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
tomatotruck993
Posts: 29
Joined: Fri Nov 22, 2013 1:18 pm

PT-23 Elevator hinge brackets

Post by tomatotruck993 »

'
Can anyone offer me some photos or drawings of the openings made in the horizontal Stabilizer to tighten the hinge bracket nuts?'
Top
Curt Kinchen
Posts: 105
Joined: Fri Jun 20, 2003 11:00 am

Re: PT-23 Elevator hinge brackets

Post by Curt Kinchen »

'It's Service Bulletin 42-1-C.  The sketch shows elliptical slot with round ends 1.5 inches long with 3/8 radius at both ends.  Parallel to the spar.  Just forward of the spar.
No torque value given, tighten as required.  
Curt Kinchen

Sent from my iPad
On Jun 18, 2016, at 9:54 PM, wsknettl@centurytel.net [fairchildclub] wrote:
 

Can anyone offer me some photos or drawings of the openings made in the horizontal Stabilizer to tighten the hinge bracket nuts?
'
Top
Post Reply

Return to “Yahoo Group Archives”