Re: F24 C8C Rescue

[f24c8c]

'Hello Group,
I've got 2 weeks to find a home for my C8C Project before I leave to the
other side of the planet for 3 years. I've exhausted my "reasonable"
local storage options. Any interest out there?

It would be a good companion for anyone else restoring a C8C
http://www.avclaims.com/N14722.html


Registration Canada: CF-AAT formerly NC 14321
S/N: 2612
Certificate No. 535
Model: C8C

* Fuselage, no FWF
* No wings, but all the hardware is there: front and rear lift
struts, ailerons, push rods, torque tubes, drag trusses, etc,

* There are a couple of wing rib jigs (ancient), a number of
representative ribs, etc

* 4 wing tanks in total (a rare commodity)
* Complete rear empennage and 2 rudders
* Gear legs (no shocks)

* Most of sheet metal, cowling, brackets, side window, etc,

* Doors (Skins, 1 good wood frame, other scrap, some door hardware)

* Wheel pants
* There are also some parts from NC 14314 (rear rudder assembly,
and probably the other 2 wing tanks, apparently this was briefly
registered to the president of Cessna).

Pictures etc in Photo/File view mode at following link:

https://www.idrive.com/idrivee/ibsjsp/IDEVSGetShare.jsp?k=rkcuy36267

That's about the summary.



[Non-text portions of this message have been removed]'

[jameslbryan@btopenworld.com]

'Hi If you split the parts can I have the wheel pants ? and associated metal work please.
Money waiting

James



________________________________
From: f24c8c
To: fairchildclub@yahoogroups.com
Sent: Friday, 13 July 2012, 14:36
Subject: [fairchildclub] F24 C8C Rescue


 
Hello Group,
I've got 2 weeks to find a home for my C8C Project before I leave to the
other side of the planet for 3 years. I've exhausted my "reasonable"
local storage options. Any interest out there?

It would be a good companion for anyone else restoring a C8C
http://www.avclaims.com/N14722.html


Registration Canada: CF-AAT formerly NC 14321
S/N: 2612
Certificate No. 535
Model: C8C

* Fuselage, no FWF
* No wings, but all the hardware is there: front and rear lift
struts, ailerons, push rods, torque tubes, drag trusses, etc,

* There are a couple of wing rib jigs (ancient), a number of
representative ribs, etc

* 4 wing tanks in total (a rare commodity)
* Complete rear empennage and 2 rudders
* Gear legs (no shocks)

* Most of sheet metal, cowling, brackets, side window, etc,

* Doors (Skins, 1 good wood frame, other scrap, some door hardware)

* Wheel pants
* There are also some parts from NC 14314 (rear rudder assembly,
and probably the other 2 wing tanks, apparently this was briefly
registered to the president of Cessna).

Pictures etc in Photo/File view mode at following link:

https://www.idrive.com/idrivee/ibsjsp/IDEVSGetShare.jsp?k=rkcuy36267

That's about the summary.

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]'