Re: Wheel Seals

[Tom Downey]

'I need the part number of the garloc seal used for the inner bearing
grease seal in a 10" Hayes wheel.

O.D. 2.800"
I.D. 1.800"
thickness .500"

Tom D.
NC19143'

[Bob Haas]

'Hey Tom, I don't have the number of the seal but if you can find an old
parts house they might have a Timken-Bowers-BCA bearing interchange catalog
which gives the part number of that seal. The Timken bearing number
is19150-19268, cone and cup. The old Hayes, or Fairchild number for the felt
seal is E 50024-72. good hunting!



_____

From: Tom Downey [mailto:ias@whidbey.net]
Sent: Friday, March 11, 2005 10:15 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Wheel Seals




I need the part number of the garloc seal used for the inner bearing
grease seal in a 10" Hayes wheel.

O.D. 2.800"
I.D. 1.800"
thickness .500"

Tom D.
NC19143








Yahoo! Groups Sponsor



ADVERTISEMENT

click here







_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

* To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com


* Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.



[Non-text portions of this message have been removed]'

[Tom Downey]

'"Bob Haas" wrote:

> Hey Tom, I don't have the number of the seal but if you can find

an old

> parts house they might have a Timken-Bowers-BCA bearing

interchange catalog

> which gives the part number of that seal. The Timken bearing number
> is19150-19268, cone and cup. The old Hayes, or Fairchild number

for the felt

> seal is E 50024-72. good hunting!

I have a local company that has really been great at crossing these
sizes to a CR part number.

I though maybe some one would have the number, and save me a trip
to Bellingham (60 miles north) to see them. I'll call it in monday
and see if they will work their magic on the phone.

My project is up on gear for the first time in 3 years.'