'I have to make four new nose ribs for a wing I'm repairing. These
are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
Mike Kelly'
Re: Nose rib drawings for PT wings.
-
fred kumpf
- Posts: 7
- Joined: Sun Dec 21, 2003 11:53 am
Re: Nose rib drawings for PT wings.
'Mr Kelly
I am in progress of getting PT -19 drawings from Greg Ward. He mentioned your name.
It just happens that last night I checked to see if subject drawings were on the micro-
films available from Air & space. Yes they are; on roll "D" frame nos 550, 551, 552 and
431. It will be a few days before I get to our public library to see if they are readable.
Fred A Kumpf
Commemorative Air Force
Tulsa Squadron
otfoot49 wrote:
I have to make four new nose ribs for a wing I'm repairing. These
are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
Mike Kelly
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/
To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
[Non-text portions of this message have been removed]'
I am in progress of getting PT -19 drawings from Greg Ward. He mentioned your name.
It just happens that last night I checked to see if subject drawings were on the micro-
films available from Air & space. Yes they are; on roll "D" frame nos 550, 551, 552 and
431. It will be a few days before I get to our public library to see if they are readable.
Fred A Kumpf
Commemorative Air Force
Tulsa Squadron
otfoot49 wrote:
I have to make four new nose ribs for a wing I'm repairing. These
are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
Mike Kelly
Yahoo! Groups SponsorADVERTISEMENT
---------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/
To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
[Non-text portions of this message have been removed]'
-
purplewhite1978
- Posts: 16
- Joined: Fri Jul 02, 2004 8:21 pm
Re: Nose rib drawings for PT wings.
'Fred,
Greg here.
If you find that the rib drawings that you and Mike need are
readable, then you "should" be able to take that roll of microfilm
to your local "blue-print" shop, have them read and digitize the
image to a computer hard-drive, then print the images any size paper
you desire. Granted, you can be assured that the images will be
distorted, and possibly even poor, but they may offer enough to help
assist in the project. We did that quite often while restoring the
SBD here at the Air Zoo, until we eventually had everything
digitized to a CD.
Greg
--- In fairchildclub@yahoogroups.com, fred kumpf
wrote:
Greg here.
If you find that the rib drawings that you and Mike need are
readable, then you "should" be able to take that roll of microfilm
to your local "blue-print" shop, have them read and digitize the
image to a computer hard-drive, then print the images any size paper
you desire. Granted, you can be assured that the images will be
distorted, and possibly even poor, but they may offer enough to help
assist in the project. We did that quite often while restoring the
SBD here at the Air Zoo, until we eventually had everything
digitized to a CD.
Greg
--- In fairchildclub@yahoogroups.com, fred kumpf
wrote:
mentioned your name.> Mr Kelly
>
> I am in progress of getting PT -19 drawings from Greg Ward. He
drawings were on the micro-> It just happens that last night I checked to see if subject
nos 550, 551, 552 and> films available from Air & space. Yes they are; on roll "D" frame
see if they are readable.> 431. It will be a few days before I get to our public library to
Service.>
> Fred A Kumpf
> Commemorative Air Force
> Tulsa Squadron
> otfoot49 wrote:
> I have to make four new nose ribs for a wing I'm repairing. These
> are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
> shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
>
> Mike Kelly
>
>
> Yahoo! Groups SponsorADVERTISEMENT
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/fairchildclub/
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
'>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail - 50x more storage than other providers!
>
> [Non-text portions of this message have been removed]
-
Charles Mueller
- Posts: 19
- Joined: Mon Apr 07, 2003 9:04 am
microfilm PT drawings from NASM
'When I first got the roll of microfilm PT drawings from NASM I went
through each frame to make an index of the roll's content (mostly part
and drawing numbers). I also made a judgement on the quality of each
frame as to its usefulness. The PT nose rib drawings asked about
earlier were all rated as a 2. My quality scale ran from 1 (poorest -
not usable) to 5 (best - easy to work with). A 2 was rated "some
usable information", i.e. not good enough for making a jig without a
lot of creativity being added, dimensions not or barely readable.
By the way - I'd be happy to send a copy of this index to anyone
interested. It is in a MS Word document file. Just send your email
address to me at . I'll reply with the file
attached.
Charles'
through each frame to make an index of the roll's content (mostly part
and drawing numbers). I also made a judgement on the quality of each
frame as to its usefulness. The PT nose rib drawings asked about
earlier were all rated as a 2. My quality scale ran from 1 (poorest -
not usable) to 5 (best - easy to work with). A 2 was rated "some
usable information", i.e. not good enough for making a jig without a
lot of creativity being added, dimensions not or barely readable.
By the way - I'd be happy to send a copy of this index to anyone
interested. It is in a MS Word document file. Just send your email
address to me at . I'll reply with the file
attached.
Charles'
Re: Nose rib drawings for PT wings.
'--- In fairchildclub@yahoogroups.com, fred kumpf
wrote:
Thanks for your reply to my enquirey for PT-19 rib drawings for
the wing. It sounds like thye may not be available from the film.
I've heard that the quality of some of the drawings on the film
aren't readable. I'd still be interested if you can get anything
from them. I have got the ribs from a friend and I will try to make
drawings using the ribs. I'll let you know how things come out.
Mike Kelly
92 North Circle Drive
Coldwater,MI. 49036-1155
PT-19B N127MP
wrote:
mentioned your name.> Mr Kelly
>
> I am in progress of getting PT -19 drawings from Greg Ward. He
drawings were on the micro-> It just happens that last night I checked to see if subject
nos 550, 551, 552 and> films available from Air & space. Yes they are; on roll "D" frame
see if they are readable.> 431. It will be a few days before I get to our public library to
Fred:>
> Fred A Kumpf
> Commemorative Air Force
> Tulsa Squadron
> otfoot49 wrote:
> I have to make four new nose ribs for a wing I'm repairing. These
> are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
> shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
>
> Mike Kelly
>
Thanks for your reply to my enquirey for PT-19 rib drawings for
the wing. It sounds like thye may not be available from the film.
I've heard that the quality of some of the drawings on the film
aren't readable. I'd still be interested if you can get anything
from them. I have got the ribs from a friend and I will try to make
drawings using the ribs. I'll let you know how things come out.
Mike Kelly
92 North Circle Drive
Coldwater,MI. 49036-1155
PT-19B N127MP
Service.> Yahoo! Groups SponsorADVERTISEMENT
>
>
> ---------------------------------
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/fairchildclub/
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
'>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail - 50x more storage than other providers!
>
> [Non-text portions of this message have been removed]
-
Norbert J Mc Luckie
- Posts: 16
- Joined: Sun Mar 30, 2003 1:30 pm
Re: Nose rib drawings for PT wings.
'I found, in my collection of PT memorabelia, wing drawings from U.S. Army
tech order 01-115GA-3 dated 6-43. I remembered that someone was asking for
info so I made copies of about 20 pages that I will send to Mike Kelly of
Coldwater, MI. He can forward them if I have chosen the wrong recipient.
Norb "Lucky" Mc Luckie Coal City, IL 60416 815 534 4504
tech order 01-115GA-3 dated 6-43. I remembered that someone was asking for
info so I made copies of about 20 pages that I will send to Mike Kelly of
Coldwater, MI. He can forward them if I have chosen the wrong recipient.
Norb "Lucky" Mc Luckie Coal City, IL 60416 815 534 4504
'----- Original Message -----
From: "hotfoot49"
To:
Sent: Saturday, July 10, 2004 6:48 PM
Subject: [fairchildclub] Re: Nose rib drawings for PT wings.
> --- In fairchildclub@yahoogroups.com, fred kumpf
> wrote:
> > Mr Kelly
> >
> > I am in progress of getting PT -19 drawings from Greg Ward. He
> mentioned your name.
> > It just happens that last night I checked to see if subject
> drawings were on the micro-
> > films available from Air & space. Yes they are; on roll "D" frame
> nos 550, 551, 552 and
> > 431. It will be a few days before I get to our public library to
> see if they are readable.
> >
> > Fred A Kumpf
> > Commemorative Air Force
> > Tulsa Squadron
> > otfoot49 wrote:
> > I have to make four new nose ribs for a wing I'm repairing. These
> > are part numbers 63117-1,63118-1,63119-1,and 63120-1 . These are
> > shown as ribs # 1,2,3,and 4 in figure 6 of the parts catalog.
> >
> > Mike Kelly
> >
> Fred:
>
> Thanks for your reply to my enquirey for PT-19 rib drawings for
> the wing. It sounds like thye may not be available from the film.
> I've heard that the quality of some of the drawings on the film
> aren't readable. I'd still be interested if you can get anything
> from them. I have got the ribs from a friend and I will try to make
> drawings using the ribs. I'll let you know how things come out.
>
> Mike Kelly
> 92 North Circle Drive
> Coldwater,MI. 49036-1155
> PT-19B N127MP
> > Yahoo! Groups SponsorADVERTISEMENT
> >
> >
> > ---------------------------------
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/fairchildclub/
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Yahoo! Mail - 50x more storage than other providers!
> >
> > [Non-text portions of this message have been removed]
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> --------------------------------------------------------------------------
------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/fairchildclub/
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>