Re: exhaust gaskets

paul pinato · Post by **paul pinato** » Sun Apr 11, 2004 2:16 am

'Hello
I am just in thr process to get my Warner 165 finished and my problem is to find exhaust gaskets between cylinder and manifold. Can anybody help me with a partnumber.

paul

[Non-text portions of this message have been removed]'

Tom Downey · Post by **Tom Downey** » Sun Apr 11, 2004 9:43 am

'--- In fairchildclub@yahoogroups.com, "paul pinato"
wrote:

> Hello
> I am just in thr process to get my Warner 165 finished and my

problem is to find exhaust gaskets between cylinder and manifold.
Can anybody help me with a partnumber.

>
> paul

call Harman Dickerson @ 573-449-6428

he'll know what you want, I got 7 from him last year.'

Tom and Carol Burmeister · Tue Apr 13, 2004 7:09 am

'If Harman does not have any of the gaskets that you are looking for you can use a Lycoming exhaust gasket . The Lycoming gasket is the same except that the hole in the center is a ltttle smaller and the stud holes are a little larger but they will work fine.

Tom Downey wrote:--- In fairchildclub@yahoogroups.com, "paul pinato"
wrote:

> Hello
> I am just in thr process to get my Warner 165 finished and my

problem is to find exhaust gaskets between cylinder and manifold.
Can anybody help me with a partnumber.

>
> paul

call Harman Dickerson @ 573-449-6428

he'll know what you want, I got 7 from him last year.

Yahoo! Groups SponsorADVERTISEMENT

---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/fairchildclub/

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---------------------------------
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway - Enter today

[Non-text portions of this message have been removed]'

KD Kinne · Post by **KD Kinne** » Tue Apr 13, 2004 8:33 pm

'Go see ylour local onan dealer. the onan units in the larger motor homes
have a metalized exhaust gasket that fits fine. check it out

----- Original Message -----
From: "paul pinato"
To: "fairchild group"
Sent: Sunday, April 11, 2004 1:22 AM
Subject: [fairchildclub] exhaust gaskets

> Hello
> I am just in thr process to get my Warner 165 finished and my problem is
to find exhaust gaskets between cylinder and manifold. Can anybody help me
with a partnumber.
>
> paul
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>

'