Re: tailwheel collar

KineykW@aol.com · Post by **KineykW@aol.com** » Sat May 25, 2002 8:46 am

'I am looking for the brass collar that is part of the tailwheel for the
F-24. Does any one have one around? Mine is worn and I guess I'll have to
braize on some more material and machine it out if I can't find a
replacement. Thank you.

Wallace Kineyko'

WALTER ALBERT · Post by **WALTER ALBERT** » Sat Jun 01, 2002 7:06 pm

'will check my supply tomorrow.. Walt

----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar

> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

WALTER ALBERT · Post by **WALTER ALBERT** » Fri Jun 07, 2002 11:12 am

'I have one. walt

----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar

> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

WALTER ALBERT · Post by **WALTER ALBERT** » Wed Jun 19, 2002 8:36 pm

'I have the brass collar you need. Walt

----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar

> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

KineykW@aol.com · Post by **KineykW@aol.com** » Thu Jun 20, 2002 5:50 am

'thanks walt, but i had somebody here machine one out of a billet of brass.
it cost me, but the tailwheel is now better than factory new.'