Re: Fuel meeters

paul pinato · Post by **paul pinato** » Mon Aug 27, 2001 1:15 pm

'hello FA friends

Doing the overhaul of my fuel tanks I have seen that the meeters are a weakpoint in the system. Mine are worn and corroded.
Do anybody know were I can find new ones or some alternative. I like to keep the instruments as they are nice with the FA logo on the face.

paul

[Non-text portions of this message have been removed]'

Mr & Mrs Cox · Post by **Mr & Mrs Cox** » Mon Aug 27, 2001 2:06 pm

'Hello all

I also have the same problem with my fuel quantity system, worn rheostats
and corroded tank fittings. I have obtained modern Stewart Warner system
they appear to be the original manufacturer but no longer support the older
systems). however the tank sender unit is designed for top mounting ( for
cars).

This can be overcome by some nifty wire bending on the float arm but the
gauge and rheostat calibration do not match the tank volume/shape
combination. Other than recalibrating the gauge face I can not think of
another way out.

As with Paul I am on the lookout for new/reconditioned 12 volt sender units
that match the original SW gauges with the Fairchild Logo on them.

Any Info will be very much appreciated

Frank Cox

----- Original Message -----
From: "paul pinato"
To: "fairchild group"
Sent: Monday, August 27, 2001 8:08 PM
Subject: [fairchildclub] Fuel meeters

> hello FA friends
>
> Doing the overhaul of my fuel tanks I have seen that the meeters are a
weakpoint in the system. Mine are worn and corroded.
> Do anybody know were I can find new ones or some alternative. I like to
keep the instruments as they are nice with the FA logo on the face.
>
> paul
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

jstreat360@aol.com · Post by **jstreat360@aol.com** » Mon Aug 27, 2001 6:23 pm

'Paul,

You can purchase new ones, Century Inst can reface with the org color and
lettering. They also have the GIF for the Fairchild. They have done my
Aeronca's over the years and will be doing my Fairchild inst also. I sent
them the GIF last week, they can do.

Sincerely,

Jamie S. Treat A&P/IA

Visit my Aviation Web Site:
http://hometown.aol.com/ftreat9191/AIRCRAFTRESTORATIONREPAIRindex.html">AIRCRAFT RESTORATION & REPAIR

Come Meet My Family:
http://hometown.aol.com/ftreat9191/TreatFamilyHomePage.html">THE TREAT FAMILY

[Non-text portions of this message have been removed]'

Bob Webster · Post by **Bob Webster** » Mon Aug 27, 2001 7:24 pm

'Paul, Jamie and anyone else interested.

I have a Skysports capacitance fuel gauge system in my F-24. I am not
dazzled with the accuracy as yet as I have enough other problems to work
on, but it does work after a fashion.

Bob

-----Original Message-----
From: jstreat360@aol.com [mailto:jstreat360@aol.com]
Sent: Monday, August 27, 2001 7:21 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fuel meeters

Paul,

You can purchase new ones, Century Inst can reface with the org color
and
lettering. They also have the GIF for the Fairchild. They have done my
Aeronca's over the years and will be doing my Fairchild inst also. I
sent
them the GIF last week, they can do.

Sincerely,

Jamie S. Treat A&P/IA

Visit my Aviation Web Site:
http://hometown.aol.com/ftreat9191/AIRCRAFTRESTORATIONREPAIRindex.
html">AIRCRAFT RESTORATION & REPAIR

Come Meet My Family:
http://hometown.aol.com/ftreat9191/TreatFamilyHomePage.html">THE
TREAT FAMILY

[Non-text portions of this message have been removed]

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/'