Re: F24 master brake cylinder renuild

returntoservice2000@yahoo.com · Tue Mar 13, 2001 10:25 am

'Iam looking for someone that can bore and sleeve the original
Fairchild master brake cylinders.Saw an article some time back in the
fairchild flyer news letter but did not recall an address on where to
send master cyl. for this type of repair.Any help would be
appreciated.Thanks Tom Burmeister'

Vintage Wings, Inc. · Tue Mar 13, 2001 10:28 am

'Hey Tom,

Send me your Email and phone number.

Gene Lehman
Gene@vintagewings.com

[Non-text portions of this message have been removed]'

Pilot4906@aol.com · Post by **Pilot4906@aol.com** » Tue Mar 13, 2001 1:56 pm

'If interested there is a NAPA cylinder that is the same except for metric
threads. This can be taken care of with adapters. Same size as original.

We have not completed aircraft yet but will be testing in a couple months.

Gene Haines

[Non-text portions of this message have been removed]'

Vintage Wings, Inc. · Post by **Vintage Wings, Inc.** » Tue Mar 13, 2001 2:21 pm

'Can you give me the part numbers for the NAPA cylinders please.

Gene Lehman

[Non-text portions of this message have been removed]'

Dorothy Haas · Post by **Dorothy Haas** » Tue Mar 13, 2001 8:47 pm

'Yo Tom! Look on page 120 of Jan 01 Hemmings Motor News, usually available
at a good library. I used a shop I Virginia years ago for My C8F master
cylinders, I believe they are 39 Dodge truck. Good luck! Bob Haas, Ft
Myers FL.

-----Original Message-----
From: returntoservice2000@yahoo.com [mailto:returntoservice2000@yahoo.com]
Sent: Tuesday, March 13, 2001 11:26 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] F24 master brake cylinder renuild

Iam looking for someone that can bore and sleeve the original
Fairchild master brake cylinders.Saw an article some time back in the
fairchild flyer news letter but did not recall an address on where to
send master cyl. for this type of repair.Any help would be
appreciated.Thanks Tom Burmeister

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/'

Pilot4906@aol.com · Post by **Pilot4906@aol.com** » Tue Mar 13, 2001 8:54 pm

'will try to find the invoice and let you know

[Non-text portions of this message have been removed]'

robert Etter · Post by **robert Etter** » Tue Mar 13, 2001 10:56 pm

'I did some checking a while back on brake master cylinders. There is a guy
back east (716)373-0644. Bud is his name. He is at "budsbrakes@aol.com. I
think he said that he can resleeve old master cylinders.

----- Original Message -----
From:
To:
Sent: Tuesday, March 13, 2001 8:25 AM
Subject: [fairchildclub] F24 master brake cylinder renuild

> Iam looking for someone that can bore and sleeve the original
> Fairchild master brake cylinders.Saw an article some time back in the
> fairchild flyer news letter but did not recall an address on where to
> send master cyl. for this type of repair.Any help would be
> appreciated.Thanks Tom Burmeister
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'