Re: Warner 165 Gasket question

Joe Preston · Post by **Joe Preston** » Wed Feb 22, 2017 8:22 am

' Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe '

JP · Post by JP » Wed Feb 22, 2017 10:05 am

'I opted to reassemble without using one, if you do want to use one you will have to cut one out yourself. It is an easy thing to do

Sent from my iPad

On Feb 22, 2017, at 9:22 AM, Joe Preston Joe@Preston-Company.com [fairchildclub] wrote:

Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe
'

John Duncan · Post by **John Duncan** » Wed Feb 22, 2017 10:35 am

'
Hello Joe,

I think the number is 7156, and I may have one. I will check and get back to you.

Regards,

John Duncan

Warner Engines
Great Lakes Aircraft

From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 7:22 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Warner 165 Gasket question
Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe
'

Joe Preston · Post by **Joe Preston** » Wed Feb 22, 2017 10:39 am

' Thanks John, Where was the number listed? Just curious. It was not in either parts manuals. -- Joe From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
Sent: Wednesday, February 22, 2017 11:36 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Warner 165 Gasket question
Hello Joe,

I think the number is 7156, and I may have one. I will check and get back to you.

Regards,

John Duncan

Warner Engines
Great Lakes Aircraft From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 7:22 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Warner 165 Gasket question Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe '

John Duncan · Post by **John Duncan** » Wed Feb 22, 2017 10:46 am

'
It is listed in the complete engine drawing located at the end of the Pilots Handbook......very small print and difficult to read. This is the gasket used between the carburetor and induction housing. If you need the gasket used on the intake side of the carb, it perhaps may be found in the Fairchild manual.

Regards,

JD

From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 9:39 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] RE: Warner 165 Gasket question
Thanks John, Where was the number listed? Just curious. It was not in either parts manuals. -- Joe From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
Sent: Wednesday, February 22, 2017 11:36 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Warner 165 Gasket question
Hello Joe,

I think the number is 7156, and I may have one. I will check and get back to you.

Regards,

John Duncan

Warner Engines
Great Lakes Aircraft From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 7:22 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Warner 165 Gasket question Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe
'

Joe Preston · Post by **Joe Preston** » Wed Feb 22, 2017 10:56 am

' Yes, I need the one that attaches to the bottom of the carb. -- Joe From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
Sent: Wednesday, February 22, 2017 11:44 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Warner 165 Gasket question
It is listed in the complete engine drawing located at the end of the Pilots Handbook......very small print and difficult to read. This is the gasket used between the carburetor and induction housing. If you need the gasket used on the intake side of the carb, it perhaps may be found in the Fairchild manual.

Regards,

JD From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 9:39 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] RE: Warner 165 Gasket question Thanks John, Where was the number listed? Just curious. It was not in either parts manuals. -- Joe From: fairchildclub@yahoogroups.com [fairchildclub@yahoogroups.com]
Sent: Wednesday, February 22, 2017 11:36 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Warner 165 Gasket question
Hello Joe,

I think the number is 7156, and I may have one. I will check and get back to you.

Regards,

John Duncan

Warner Engines
Great Lakes Aircraft From: fairchildclub@yahoogroups.com on behalf of Joe Preston Joe@Preston-Company.com [fairchildclub]
Sent: Wednesday, February 22, 2017 7:22 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Warner 165 Gasket question Does anyone know the number of the gasket that goes between the carb and the airbox for the Warner 165? I do not see it listed in the parts manuals. The other question is where can I find one? Joe '

ccmueller001 · Post by **ccmueller001** » Wed Feb 22, 2017 10:14 pm

'The 2nd edition 165 parts catalog (1942 edition) I have shows 7156 as the gasket number. The price list that is stuck into the catalog (undated) has a price of .10
The price list also shows "Carburetor SS50-50A" on the same line.

The catalog cover shows that it is from: Paul Daily Air Goods, 1154 Halm Blvd., San Antonio. Texas 78216
I didn't think zip codes were introduced until the 60s, so that a bit of a puzzle.'

Joe Preston · Post by **Joe Preston** » Thu Feb 23, 2017 5:40 am

'

I think that is the one that goes on the top of the carb. I need the one that goes on the bottom. It goes between the bottom of the carb and the heat control valve/airbox.
Thanks,
Joe

Sent from my iPad Mini

On Feb 22, 2017, at 23:14, cmueller@csuchico.edu [fairchildclub] wrote:

The 2nd edition 165 parts catalog (1942 edition) I have shows 7156 as the gasket number. The price list that is stuck into the catalog (undated) has a price of .10
The price list also shows "Carburetor SS50-50A" on the same line.

The catalog cover shows that it is from: Paul Daily Air Goods, 1154 Halm Blvd., San Antonio. Texas 78216
I didn't think zip codes were introduced until the 60s, so that a bit of a puzzle.

'

Mueller, Charles · Post by **Mueller, Charles** » Thu Feb 23, 2017 11:23 pm

'My book doesn’t show the gasket for the inlet side of the carb.

They do show the heat control valve, but no gasket shown there either.

Is your Warner on a Great Lakes? I was trying to buy a Warner powered GL from the San Diego Air & Space Museum many years ago. They took so long to respond that I found another one. The day after I got that one home they accepted my offer!

Probably just as well.

Charles'

Joe Preston · Post by **Joe Preston** » Fri Feb 24, 2017 7:45 am

'

Yes, it is a 1930 Great Lakes. I bought one of the new dishpans and am fitting the cowl around it.

Which airplane do you now have?

--
Joe

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

Sent: Friday, February 24, 2017 12:24 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Warner 165 Gasket question

My book doesn’t show the gasket for the inlet side of the carb.

They do show the heat control valve, but no gasket shown there either.

Is your Warner on a Great Lakes? I was trying to buy a Warner powered GL from the San Diego Air & Space Museum many years ago. They took so long to respond that I found another one. The day after I got that one home they accepted my offer!

Probably just as well.

Charles

'