Re: Fairleads for brake cables

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
Fritz
Posts: 45
Joined: Wed Oct 06, 2010 9:08 pm

Fairleads for brake cables

Post by Fritz »

'On a  PT-19/26, the master cylinders are actuated by cables from the rear cockpit footpedals. As the cables go forward through the front spar, they pass through a clip holding a 3/8 inch round fairlead, sometimes made of Formica or from phenolic.  Does anyone know where to get these fairleads. ?????  Fritz , San Diego  '
Top
Craig
Posts: 36
Joined: Thu Jul 08, 2004 12:04 am

Re: Fairleads for brake cables

Post by Craig »

'Fritz: Like these?
http://www.aircraftspruce.com/catalog/appages/fairleads.php?clickkey=6717'
Top
gtg15751@yahoo.com
Posts: 8
Joined: Tue Oct 20, 2015 5:41 pm

Re: Fairleads for brake cables

Post by gtg15751@yahoo.com »

'Aircraft spruce under tubular phenolic, thin ban saw after grooving an end?.
Sent from my BlackBerry 10 smartphone. From: 'Fritz' avdflyr@cox.net [fairchildclub]Sent: Sunday, December 27, 2015 11:08To: fairchildclub@yahoogroups.comReply To: fairchildclub@yahoogroups.comSubject: [fairchildclub] Fairleads for brake cables
 
On a  PT-19/26, the master cylinders are actuated by cables from the rear cockpit footpedals. As the cables go forward through the front spar, they pass through a clip holding a 3/8 inch round fairlead, sometimes made of Formica or from phenolic.  Does anyone know where to get these fairleads. ?????  Fritz , San Diego  

'
Top
gtg15751@yahoo.com
Posts: 8
Joined: Tue Oct 20, 2015 5:41 pm

Re: Fairleads for brake cables

Post by gtg15751@yahoo.com »

'These are like piper "J" series od 3/4.

Sent from my BlackBerry 10 smartphone.
  Original Message  
From: Craig cvcantwell@verizon.net [fairchildclub]
Sent: Sunday, December 27, 2015 11:23
To: fairchildclub@yahoogroups.com
Reply To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairleads for brake cables

Fritz: Like these?
http://www.aircraftspruce.com/catalog/appages/fairleads.php?clickkey=6717



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links'
Top
Fritz
Posts: 45
Joined: Wed Oct 06, 2010 9:08 pm

Re: Fairleads for brake cables

Post by Fritz »

'Yup, those are fairleads but not available in 3/8 diameter.
Thanks,
Fritz

-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com]
Sent: Sunday, December 27, 2015 9:23 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairleads for brake cables

Fritz: Like these?
http://www.aircraftspruce.com/catalog/appages/fairleads.php?
clickkey=6717



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links'
Top
Fritz
Posts: 45
Joined: Wed Oct 06, 2010 9:08 pm

Re: Fairleads for brake cables

Post by Fritz »

'Yup, last resort…thanks,Fritz    From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
Sent: Sunday, December 27, 2015 9:23 AM
To: 'Fritz' avdflyr@cox.net [fairchildclub]
Subject: Re: [fairchildclub] Fairleads for brake cables  


Aircraft spruce under tubular phenolic, thin ban saw after grooving an end?.  Sent from my BlackBerry 10 smartphone.From: 'Fritz' avdflyr@cox.net [fairchildclub]Sent: Sunday, December 27, 2015 11:08To: fairchildclub@yahoogroups.comReply To: fairchildclub@yahoogroups.comSubject: [fairchildclub] Fairleads for brake cables    On a  PT-19/26, the master cylinders are actuated by cables from the rear cockpit footpedals. As the cables go forward through the front spar, they pass through a clip holding a 3/8 inch round fairlead, sometimes made of Formica or from phenolic.  Does anyone know where to get these fairleads. ????? Fritz , San Diego 




'
Top
Fritz
Posts: 45
Joined: Wed Oct 06, 2010 9:08 pm

Re: Fairleads for brake cables

Post by Fritz »

'Yup, need 3/8 OD
Thanks,
Fritz

-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com]
Sent: Sunday, December 27, 2015 9:26 AM
To: Craig cvcantwell@verizon.net [fairchildclub]
Subject: Re: [fairchildclub] Fairleads for brake cables

These are like piper "J" series od 3/4.

Sent from my BlackBerry 10 smartphone.
  Original Message  
From: Craig cvcantwell@verizon.net [fairchildclub]
Sent: Sunday, December 27, 2015 11:23
To: fairchildclub@yahoogroups.com
Reply To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairleads for brake cables

Fritz: Like these?
http://www.aircraftspruce.com/catalog/appages/fairleads.php?
clickkey=6717



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links





------------------------------------
Posted by: gtg15751@yahoo.com
------------------------------------


------------------------------------

Yahoo Groups Links'
Top
Post Reply

Return to “Yahoo Group Archives”