Re: NEW MEMBER -- reltney20

[dcasali]

'Comment from user: reltney20

I have a PT-19





** PLEASE NOTE ***


TO RESPOND TO THE NEW MEMBER, please use the 'reply to group' link at the end of this message. Directly replying to this message will reach me, not the new member.

The comments above are from the new member(s), not Dan Casali, the group moderator. They were made during the new member sign-up and would otherwise be unavailable to the general membership.


Thanks

Dan Casali
Group Moderator




[Non-text portions of this message have been removed]'

[Fritz Mehrer]

'Got any spare parts???

-----Original Message-----
From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of Dan Casali
Sent: Wednesday, November 28, 2012 10:42 AM
To: Fairchild List
Subject: [fairchildclub] NEW MEMBER -- reltney20

Comment from user: reltney20

I have a PT-19





** PLEASE NOTE ***


TO RESPOND TO THE NEW MEMBER, please use the 'reply to group' link at
the end of this message. Directly replying to this message will reach
me, not the new member.

The comments above are from the new member(s), not Dan Casali, the
group moderator. They were made during the new member sign-up and
would otherwise be unavailable to the general membership.


Thanks

Dan Casali
Group Moderator




[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links'

[Reltney]

'No, I am building up a small spare part collection. What are you looking for?

Sent from my iPad'

[james chybicki]

'Hi All
I have the following PT parts here in Chicago:
61515 Tube-front operation. 605004 cowl right side. left and right mags for a RANGER (cores).  fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks.  62161 stick and 6282-3 socket.  Oil cooler 6" dia.200 HP Ranger.(core, had been dropped and has a flat spot on upper leading edge)PN 61301 drag link for Fairchild PT's.  60544 Tail fairing-vertical. Fwd and Rear custom seat cushions. 60543  tail fairing-upper.3 in 1 temp & pressure gauge. Various Push Tubes
Stick and assy forward and aft assembly from a wrecked PT. lots of good parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
Pictures avialable
 
F24-
1 L/H Wheel pant that has seen better days, but can be used as a pattern?
Old C8E oil Tank
 
I need a good used PT-19 Pitot tube
 
thanks!
Jim Chybicki
UC-61K 43-14964 / RAF ArgusIII HB-690
 
 

From: Reltney
To: "fairchildclub@yahoogroups.com"
Sent: Thursday, November 29, 2012 11:44 AM
Subject: RE: [fairchildclub] NEW MEMBER -- reltney20

 
No, I am building up a small spare part collection. What are you looking for?

Sent from my iPad


[Non-text portions of this message have been removed]'

[John Ellis]

'Hi Jim,

I have a test stand I run Ranger Engines on aftere overhaul. I need the 3
in 1 temp. and pressure gauge assemble.

Would you sell just that part, if so, how much for it.

Thanks, John

----- Original Message -----
From: "james chybicki"
To:
Sent: Thursday, November 29, 2012 1:32 PM
Subject: Re: [fairchildclub] NEW MEMBER -- reltney20


Hi All
I have the following PT parts here in Chicago:
61515 Tube-front operation. 605004 cowl right side. left and right mags for
a RANGER (cores). fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks. 62161
stick and 6282-3 socket. Oil cooler 6" dia.200 HP Ranger.(core, had been
dropped and has a flat spot on upper leading edge)PN 61301 drag link for
Fairchild PT's. 60544 Tail fairing-vertical. Fwd and Rear custom seat
cushions. 60543 tail fairing-upper.3 in 1 temp & pressure gauge. Various
Push Tubes
Stick and assy forward and aft assembly from a wrecked PT. lots of good
parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
Pictures avialable

F24-
1 L/H Wheel pant that has seen better days, but can be used as a pattern?
Old C8E oil Tank

I need a good used PT-19 Pitot tube

thanks!
Jim Chybicki
UC-61K 43-14964 / RAF ArgusIII HB-690



From: Reltney
To: "fairchildclub@yahoogroups.com"
Sent: Thursday, November 29, 2012 11:44 AM
Subject: RE: [fairchildclub] NEW MEMBER -- reltney20


No, I am building up a small spare part collection. What are you looking
for?

Sent from my iPad


[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

'

[dcasali]

'John, you've reached me, the moderator. I believe you want to send this to Jim.

On Nov 29, 2012, at 2:13 PM, John Ellis wrote:

> Hi Jim,
>
> I have a test stand I run Ranger Engines on aftere overhaul. I need the 3
> in 1 temp. and pressure gauge assemble.
>
> Would you sell just that part, if so, how much for it.
>
> Thanks, John
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, November 29, 2012 1:32 PM
> Subject: Re: [fairchildclub] NEW MEMBER -- reltney20
>
> Hi All
> I have the following PT parts here in Chicago:
> 61515 Tube-front operation. 605004 cowl right side. left and right mags for
> a RANGER (cores). fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks. 62161
> stick and 6282-3 socket. Oil cooler 6" dia.200 HP Ranger.(core, had been
> dropped and has a flat spot on upper leading edge)PN 61301 drag link for
> Fairchild PT's. 60544 Tail fairing-vertical. Fwd and Rear custom seat
> cushions. 60543 tail fairing-upper.3 in 1 temp & pressure gauge. Various
> Push Tubes
> Stick and assy forward and aft assembly from a wrecked PT. lots of good
> parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
> Pictures avialable
>
> F24-
> 1 L/H Wheel pant that has seen better days, but can be used as a pattern?
> Old C8E oil Tank
>
> I need a good used PT-19 Pitot tube
>
> thanks!
> Jim Chybicki
> UC-61K 43-14964 / RAF ArgusIII HB-690
>
> From: Reltney
> To: "fairchildclub@yahoogroups.com"
> Sent: Thursday, November 29, 2012 11:44 AM
> Subject: RE: [fairchildclub] NEW MEMBER -- reltney20
>
> No, I am building up a small spare part collection. What are you looking
> for?
>
> Sent from my iPad
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>



[Non-text portions of this message have been removed]

'

[Jeffrey Whitesell]

'Hello John

I have a box of 3 in one guages - from all sorts of airplanes. If you can give me a part number, I may have one that'll work for you...

Jeff Whitesell
805-444-2257

On Nov 29, 2012, at 1:13 PM, John Ellis wrote:

> Hi Jim,
>
> I have a test stand I run Ranger Engines on aftere overhaul. I need the 3
> in 1 temp. and pressure gauge assemble.
>
> Would you sell just that part, if so, how much for it.
>
> Thanks, John
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, November 29, 2012 1:32 PM
> Subject: Re: [fairchildclub] NEW MEMBER -- reltney20
>
> Hi All
> I have the following PT parts here in Chicago:
> 61515 Tube-front operation. 605004 cowl right side. left and right mags for
> a RANGER (cores). fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks. 62161
> stick and 6282-3 socket. Oil cooler 6" dia.200 HP Ranger.(core, had been
> dropped and has a flat spot on upper leading edge)PN 61301 drag link for
> Fairchild PT's. 60544 Tail fairing-vertical. Fwd and Rear custom seat
> cushions. 60543 tail fairing-upper.3 in 1 temp & pressure gauge. Various
> Push Tubes
> Stick and assy forward and aft assembly from a wrecked PT. lots of good
> parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
> Pictures avialable
>
> F24-
> 1 L/H Wheel pant that has seen better days, but can be used as a pattern?
> Old C8E oil Tank
>
> I need a good used PT-19 Pitot tube
>
> thanks!
> Jim Chybicki
> UC-61K 43-14964 / RAF ArgusIII HB-690
>
> From: Reltney
> To: "fairchildclub@yahoogroups.com"
> Sent: Thursday, November 29, 2012 11:44 AM
> Subject: RE: [fairchildclub] NEW MEMBER -- reltney20
>
> No, I am building up a small spare part collection. What are you looking
> for?
>
> Sent from my iPad
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>

---
Jeff Whitesell
topfun@fivetogether.com





[Non-text portions of this message have been removed]

'

[james chybicki]

'HI Jeff
by chance do you have a 2 1/4 fairchild oil pressure indicator?
Jim Chybicki
 

From: Jeffrey Whitesell
To: fairchildclub@yahoogroups.com
Sent: Thursday, November 29, 2012 11:01 PM
Subject: Re: [fairchildclub] NEW MEMBER -- reltney20

Hello John

I have a box of 3 in one guages -  from all sorts of airplanes. If you can give me a part number, I may have one that'll work for you...

Jeff Whitesell
805-444-2257

On Nov 29, 2012, at 1:13 PM, John Ellis wrote:

> Hi Jim,
>
> I have a test stand I run Ranger Engines on aftere overhaul. I need the 3
> in 1 temp. and pressure gauge assemble.
>
> Would you sell just that part, if so, how much for it.
>
> Thanks, John
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, November 29, 2012 1:32 PM
> Subject: Re: [fairchildclub] NEW MEMBER -- reltney20
>
> Hi All
> I have the following PT parts here in Chicago:
> 61515 Tube-front operation. 605004 cowl right side. left and right mags for
> a RANGER (cores). fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks. 62161
> stick and 6282-3 socket. Oil cooler 6" dia.200 HP Ranger.(core, had been
> dropped and has a flat spot on upper leading edge)PN 61301 drag link for
> Fairchild PT's. 60544 Tail fairing-vertical. Fwd and Rear custom seat
> cushions. 60543 tail fairing-upper.3 in 1 temp & pressure gauge. Various
> Push Tubes
> Stick and assy forward and aft assembly from a wrecked PT. lots of good
> parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
> Pictures avialable
>
> F24-
> 1 L/H Wheel pant that has seen better days, but can be used as a pattern?
> Old C8E oil Tank
>
> I need a good used PT-19 Pitot tube
>
> thanks!
> Jim Chybicki
> UC-61K 43-14964 / RAF ArgusIII HB-690
>
> From: Reltney
> To: "fairchildclub@yahoogroups.com"
> Sent: Thursday, November 29, 2012 11:44 AM
> Subject: RE: [fairchildclub] NEW MEMBER -- reltney20
>
> No, I am building up a small spare part collection. What are you looking
> for?
>
> Sent from my iPad
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>

---
Jeff Whitesell
topfun@fivetogether.com





[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]

'

[Jeffrey Whitesell]

'Nope, sorry

Jeff

On Nov 30, 2012, at 9:08 AM, james chybicki wrote:

> HI Jeff
> by chance do you have a 2 1/4 fairchild oil pressure indicator?
> Jim Chybicki
>
>
> From: Jeffrey Whitesell
> To: fairchildclub@yahoogroups.com
> Sent: Thursday, November 29, 2012 11:01 PM
> Subject: Re: [fairchildclub] NEW MEMBER -- reltney20
>
> Hello John
>
> I have a box of 3 in one guages - from all sorts of airplanes. If you can give me a part number, I may have one that'll work for you...
>
> Jeff Whitesell
> 805-444-2257
> On Nov 29, 2012, at 1:13 PM, John Ellis wrote:
>
> > Hi Jim,
> >
> > I have a test stand I run Ranger Engines on aftere overhaul. I need the 3
> > in 1 temp. and pressure gauge assemble.
> >
> > Would you sell just that part, if so, how much for it.
> >
> > Thanks, John
> > ----- Original Message -----
> > From: "james chybicki"
> > To:
> > Sent: Thursday, November 29, 2012 1:32 PM
> > Subject: Re: [fairchildclub] NEW MEMBER -- reltney20
> >
> > Hi All
> > I have the following PT parts here in Chicago:
> > 61515 Tube-front operation. 605004 cowl right side. left and right mags for
> > a RANGER (cores). fuel cock UNITED AIRCRAFT PN UA-499478. hand cranks. 62161
> > stick and 6282-3 socket. Oil cooler 6" dia.200 HP Ranger.(core, had been
> > dropped and has a flat spot on upper leading edge)PN 61301 drag link for
> > Fairchild PT's. 60544 Tail fairing-vertical. Fwd and Rear custom seat
> > cushions. 60543 tail fairing-upper.3 in 1 temp & pressure gauge. Various
> > Push Tubes
> > Stick and assy forward and aft assembly from a wrecked PT. lots of good
> > parts on it. Wobble Pump (core)Ranger Fuel Pump (core-broken shaft)
> > Pictures avialable
> >
> > F24-
> > 1 L/H Wheel pant that has seen better days, but can be used as a pattern?
> > Old C8E oil Tank
> >
> > I need a good used PT-19 Pitot tube
> >
> > thanks!
> > Jim Chybicki
> > UC-61K 43-14964 / RAF ArgusIII HB-690
> >
> > From: Reltney
> > To: "fairchildclub@yahoogroups.com"
> > Sent: Thursday, November 29, 2012 11:44 AM
> > Subject: RE: [fairchildclub] NEW MEMBER -- reltney20
> >
> > No, I am building up a small spare part collection. What are you looking
> > for?
> >
> > Sent from my iPad
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
>
> ---
> Jeff Whitesell
> topfun@fivetogether.com
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>

---
Jeff Whitesell
topfun@fivetogether.com





[Non-text portions of this message have been removed]

'

[Tom_Downey]

'I have one that is yours for the address to send it.

nc19143(at)comcast.net

Tom D.

> HI Jeff
> by chance do you have a 2 1/4 fairchild oil pressure indicator?
> Jim Chybicki

'