Re: Ranger Engine Torque Values

[Frank]

'I have an old copy of the 'Ranger Engine 6-440-C Overhaul Manual' where it says throughout to "Torque to Proper value".
I cannot find a table of torque values in it - maybe it was missed in the copying process.
Does anybody have or know where I could find a copy of the torque values?
Very many thanks

Frank Cox
UC61K G-BCBL'

[John Ellis]

'If more needed, contact me again..

Happy New Year! John

----- Original Message -----
From: "Frank"
To:
Sent: Saturday, December 31, 2011 11:45 AM
Subject: [fairchildclub] Ranger Engine Torque Values


>I have an old copy of the 'Ranger Engine 6-440-C Overhaul Manual' where it
>says throughout to "Torque to Proper value".
> I cannot find a table of torque values in it - maybe it was missed in the
> copying process.
> Does anybody have or know where I could find a copy of the torque values?
> Very many thanks
>
> Frank Cox
> UC61K G-BCBL
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>


[Non-text portions of this message have been removed]

'

[Jack Threadgill]

'I found this List of Torque Values for the Ranger 440 Series Engines. It is
from an overhaul manual dated Oct 1944. I have attached it in case someone
else would like a copy.



Jack



Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net





From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Frank
Sent: Saturday, December 31, 2011 11:45 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Ranger Engine Torque Values





I have an old copy of the 'Ranger Engine 6-440-C Overhaul Manual' where it
says throughout to "Torque to Proper value".
I cannot find a table of torque values in it - maybe it was missed in the
copying process.
Does anybody have or know where I could find a copy of the torque values?
Very many thanks

Frank Cox
UC61K G-BCBL





[Non-text portions of this message have been removed]'

[Jack Threadgill]

'The attachment may not have gone out on the forum. If it did not and you
want a copy, just send an email with your address.



Jack



Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net





From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Jack Threadgill
Sent: Saturday, December 31, 2011 10:54 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Ranger Engine Torque Values





I found this List of Torque Values for the Ranger 440 Series Engines. It is
from an overhaul manual dated Oct 1944. I have attached it in case someone
else would like a copy.

Jack

Jack M. Threadgill

1602 Brook Hollow Dr

Bryan, Texas 77802

979-779-7155

threadgl@suddenlink.net

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com
]
On Behalf Of Frank
Sent: Saturday, December 31, 2011 11:45 AM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Ranger Engine Torque Values

I have an old copy of the 'Ranger Engine 6-440-C Overhaul Manual' where it
says throughout to "Torque to Proper value".
I cannot find a table of torque values in it - maybe it was missed in the
copying process.
Does anybody have or know where I could find a copy of the torque values?
Very many thanks

Frank Cox
UC61K G-BCBL

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]'