Re: Part number for a Warner prop nut

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
Joe Preston
Posts: 63
Joined: Mon Mar 21, 2011 7:29 am

Part number for a Warner prop nut

Post by Joe Preston »

'Does anyone have the part number for the prop nut on the Warner 165 or know
where it could be found?

Joe




[Non-text portions of this message have been removed]'
Top
ccmueller001
Posts: 72
Joined: Sat Feb 23, 2002 4:27 pm

Re: Part number for a Warner prop nut

Post by ccmueller001 »

'According to the 1942 parts catalog it is 7920. A foot note says it's used on Models 165, 165A, 165-Suffix E & 165A-Suffix E only.

--- In fairchildclub@yahoogroups.com, "Joe Preston" wrote:
>
> Does anyone have the part number for the prop nut on the Warner 165 or know
> where it could be found?
>
> Joe
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
Tom
Posts: 32
Joined: Fri Oct 09, 2009 8:54 am

Re: Part number for a Warner prop nut

Post by Tom »

'Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599) All made by the Warner aircraft Co. out of Detroit Mich. (confusing right) Anyway, all four use an AN5011-20 propeller hub retaining nut. This is typical Army navy nomenclature of the period, and is not a manufacture's part number. Time for you and Google to get together. If you have the CD Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do have an airworthy 7900-1 I plan on offering to the group in the near future. Sorry, I don't want to break it apart, or I would help you with this problem.
Tom
Hanford,Ca.
--- In fairchildclub@yahoogroups.com, "Joe Preston" wrote:
>
> Does anyone have the part number for the prop nut on the Warner 165 or know
> where it could be found?
>
> Joe
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
Curt Kinchen
Posts: 105
Joined: Fri Jun 20, 2003 11:00 am

Re: Part number for a Warner prop nut

Post by Curt Kinchen »

'I just uploaded the AN5011 spec to the Files section on the Yahoo site.

Curt
On Fri, Apr 8, 2011 at 10:23 AM, Tom wrote:

>
>
>
> Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
> they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599)
> All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
> Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
> typical Army navy nomenclature of the period, and is not a manufacture's
> part number. Time for you and Google to get together. If you have the CD
> Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do
> have an airworthy 7900-1 I plan on offering to the group in the near future.
> Sorry, I don't want to break it apart, or I would help you with this
> problem.
> Tom
> Hanford,Ca.
>
>
> --- In fairchildclub@yahoogroups.com, "Joe Preston" wrote:
> >
> > Does anyone have the part number for the prop nut on the Warner 165 or
> know
> > where it could be found?
> >
> > Joe
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>



--
Curt Kinchen
ptcurt@gmail.com


[Non-text portions of this message have been removed]
'
Top
Joe Preston
Posts: 63
Joined: Mon Mar 21, 2011 7:29 am

Re: Part number for a Warner prop nut

Post by Joe Preston »

'Wow, thanks guys. This is great. Anyone have one of these?
This is for a Curtiss Reed so I don't need a hub, just the nut and the cones
as well if anyone has them.

Joe


_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Tom
Sent: Friday, April 08, 2011 13:23
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Part number for a Warner prop nut





Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599)
All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
typical Army navy nomenclature of the period, and is not a manufacture's
part number. Time for you and Google to get together. If you have the CD
Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do
have an airworthy 7900-1 I plan on offering to the group in the near future.
Sorry, I don't want to break it apart, or I would help you with this
problem.
Tom
Hanford,Ca.

--- In fairchildclub@yahoogroups.com
, "Joe Preston" wrote:
>
> Does anyone have the part number for the prop nut on the Warner 165 or
know
> where it could be found?
>
> Joe
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]'
Top
Hugh Loewenhardt
Posts: 59
Joined: Wed Aug 06, 2008 6:49 pm

Re: Part number for a Warner prop nut

Post by Hugh Loewenhardt »

'Joe, I,ll bet that at least one of the top notch propeller or radial engine shops in the country will have the nut you are looking for and you know it will be airworthy. Try Steve Curry at Radial Engines Limited or Al Holloway at Holloway Engineering.
--- On Fri, 4/8/11, Joe Preston wrote:


From: Joe Preston
Subject: RE: [fairchildclub] Re: Part number for a Warner prop nut
To: fairchildclub@yahoogroups.com
Date: Friday, April 8, 2011, 6:19 PM


 



Wow, thanks guys. This is great. Anyone have one of these?
This is for a Curtiss Reed so I don't need a hub, just the nut and the cones
as well if anyone has them.

Joe


_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Tom
Sent: Friday, April 08, 2011 13:23
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Part number for a Warner prop nut

Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599)
All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
typical Army navy nomenclature of the period, and is not a manufacture's
part number. Time for you and Google to get together. If you have the CD
Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do
have an airworthy 7900-1 I plan on offering to the group in the near future.
Sorry, I don't want to break it apart, or I would help you with this
problem.
Tom
Hanford,Ca.

--- In fairchildclub@yahoogroups.com
, "Joe Preston" wrote:
>
> Does anyone have the part number for the prop nut on the Warner 165 or
know
> where it could be found?
>
> Joe
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]
'
Top
Joe Preston
Posts: 63
Joined: Mon Mar 21, 2011 7:29 am

Re: Part number for a Warner prop nut

Post by Joe Preston »

'Thanks Hugh,
I already spoke with Alan. He doesn't have any. I will give Steve Curry a
call though.
Also, I was curious does anyone have a Warner engine mount they want to
sell? This would be for a 165.

Joe


_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Hugh Loewenhardt
Sent: Friday, April 08, 2011 14:47
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Re: Part number for a Warner prop nut





Joe, I,ll bet that at least one of the top notch propeller or radial engine
shops in the country will have the nut you are looking for and you know it
will be airworthy. Try Steve Curry at Radial Engines Limited or Al Holloway
at Holloway Engineering.
--- On Fri, 4/8/11, Joe Preston wrote:

From: Joe Preston
Subject: RE: [fairchildclub] Re: Part number for a Warner prop nut
To: fairchildclub@yahoogroups.com
Date: Friday, April 8, 2011, 6:19 PM



Wow, thanks guys. This is great. Anyone have one of these?
This is for a Curtiss Reed so I don't need a hub, just the nut and the cones
as well if anyone has them.

Joe

_____

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com
]
On Behalf Of Tom
Sent: Friday, April 08, 2011 13:23
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Part number for a Warner prop nut

Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599)
All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
typical Army navy nomenclature of the period, and is not a manufacture's
part number. Time for you and Google to get together. If you have the CD
Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do
have an airworthy 7900-1 I plan on offering to the group in the near future.
Sorry, I don't want to break it apart, or I would help you with this
problem.
Tom
Hanford,Ca.

--- In fairchildclub@yahoogroups.com

, "Joe Preston" wrote:
>
> Does anyone have the part number for the prop nut on the Warner 165 or
know
> where it could be found?
>
> Joe
>
>
>
>
> [Non-text portions of this message have been removed]
>
[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]'
Top
tandemtrainer
Posts: 16
Joined: Sun Dec 20, 2009 9:15 pm

Re: Part number for a Warner prop nut

Post by tandemtrainer »

'Joe,
I might have what you need. I have a nut and cones that did not fit my Warner hub. I believe that the nut I have has a flange that fits into a recess in the cone halves. The cones are brass.
Steve Lawlor
--- In fairchildclub@yahoogroups.com, "Joe Preston" wrote:
>
> Wow, thanks guys. This is great. Anyone have one of these?
> This is for a Curtiss Reed so I don't need a hub, just the nut and the cones
> as well if anyone has them.
>
> Joe
>
>
> _____
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Tom
> Sent: Friday, April 08, 2011 13:23
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Re: Part number for a Warner prop nut
>
>
>
>
>
> Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
> they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and 8599)
> All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
> Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
> typical Army navy nomenclature of the period, and is not a manufacture's
> part number. Time for you and Google to get together. If you have the CD
> Blue prints and drawings, # 48601 confirms this is the correct hub nut. I do
> have an airworthy 7900-1 I plan on offering to the group in the near future.
> Sorry, I don't want to break it apart, or I would help you with this
> problem.
> Tom
> Hanford,Ca.
>
> --- In fairchildclub@yahoogroups.com
> , "Joe Preston" wrote:
> >
> > Does anyone have the part number for the prop nut on the Warner 165 or
> know
> > where it could be found?
> >
> > Joe
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
mileslong2k
Posts: 67
Joined: Wed Oct 21, 2009 10:56 am

Re: Part number for a Warner prop nut

Post by mileslong2k »

'Anybody have a picture of what the nut in question looks like?

Jim'
Top
Joe Preston
Posts: 63
Joined: Mon Mar 21, 2011 7:29 am

Re: Part number for a Warner prop nut

Post by Joe Preston »

'Hi Steve,
Is there any way you can send me pictures? It certainly sounds like what I
need. What do you want for them?
Thanks,

Joe




_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of tandemtrainer
Sent: Friday, April 08, 2011 23:02
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Part number for a Warner prop nut





Joe,
I might have what you need. I have a nut and cones that did not fit my
Warner hub. I believe that the nut I have has a flange that fits into a
recess in the cone halves. The cones are brass.
Steve Lawlor
--- In fairchildclub@yahoogroups.com
, "Joe Preston" wrote:
>
> Wow, thanks guys. This is great. Anyone have one of these?
> This is for a Curtiss Reed so I don't need a hub, just the nut and the
cones
> as well if anyone has them.
>
> Joe
>
>
> _____
>
> From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com
]
> On Behalf Of Tom
> Sent: Friday, April 08, 2011 13:23
> To: fairchildclub@yahoogroups.com

> Subject: [fairchildclub] Re: Part number for a Warner prop nut
>
>
>
>
>
> Looking through the 1944 (revised) parts catalog for the UC-61A and UC-61K
> they show four alternate hubs for the UC-61A. (7900, 7900-1, 8530, and
8599)
> All made by the Warner aircraft Co. out of Detroit Mich. (confusing right)
> Anyway, all four use an AN5011-20 propeller hub retaining nut. This is
> typical Army navy nomenclature of the period, and is not a manufacture's
> part number. Time for you and Google to get together. If you have the CD
> Blue prints and drawings, # 48601 confirms this is the correct hub nut. I
do
> have an airworthy 7900-1 I plan on offering to the group in the near
future.
> Sorry, I don't want to break it apart, or I would help you with this
> problem.
> Tom
> Hanford,Ca.
>
> --- In fairchildclub@yahoogroups.com
> , "Joe Preston" wrote:
> >
> > Does anyone have the part number for the prop nut on the Warner 165 or
> know
> > where it could be found?
> >
> > Joe
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]'
Top
Post Reply

Return to “Yahoo Group Archives”