Re: Fuel Valve for F24

dc871f · Post by **dc871f** » Tue Mar 22, 2011 5:42 pm

'After discussions with members about fuel valves, has come to my attention that there might be differences in the valves.

To anybody that would know, are there any STC's or mods out there to change the originals valves out?'

Joe Preston · Post by **Joe Preston** » Wed Mar 23, 2011 8:01 am

'I have to admit that I am unfamiliar with the fuel valve setup here.
However, recently I was able to get approval to use the new AC 23-27 as a
means of approval to use a ball valve for replacement of a main fuel valve
shut off for a Champ. There are some caveats though. You can not modify the
operation linkage or means of installation of the valve. In other words, if
you can do a swap without having to modify anything, you should be able to
get approval. I had my local FSDO give it's blessing. This is the exact
scenario as to why this new AC was created. Ask your local IA or FSDO.

Joe

_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of dc871f
Sent: Tuesday, March 22, 2011 19:42
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fuel Valve for F24

After discussions with members about fuel valves, has come to my attention
that there might be differences in the valves.

To anybody that would know, are there any STC's or mods out there to change
the originals valves out?

[Non-text portions of this message have been removed]'

James Rice · Post by **James Rice** » Fri Mar 25, 2011 5:00 am

'Gotta Love this group! Yesterday I took time away from my F24 project to drain the fuel from my 7AC
Champ so I could work on my dripping fuel shut off valve. Off the Fairchild topic, but could I get the source
and part number for the fuel valve that you used for you're Champ?

Thanks
Jim Rice
jlrice2 (at) earthlink.net

----- Original Message -----
From: Joe Preston
To: fairchildclub@yahoogroups.com
Sent: 3/23/2011 9:01:07 AM
Subject: RE: [fairchildclub] Fuel Valve for F24

I have to admit that I am unfamiliar with the fuel valve setup here.
However, recently I was able to get approval to use the new AC 23-27 as a
means of approval to use a ball valve for replacement of a main fuel valve
shut off for a Champ. There are some caveats though. You can not modify the
operation linkage or means of installation of the valve. In other words, if
you can do a swap without having to modify anything, you should be able to
get approval. I had my local FSDO give it's blessing. This is the exact
scenario as to why this new AC was created. Ask your local IA or FSDO.

Joe

_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of dc871f
Sent: Tuesday, March 22, 2011 19:42
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fuel Valve for F24

After discussions with members about fuel valves, has come to my attention
that there might be differences in the valves.

To anybody that would know, are there any STC's or mods out there to change
the originals valves out?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Joe Preston · Post by **Joe Preston** » Fri Mar 25, 2011 7:37 am

'Hi Jim,
I will send it to you off-list

Joe
-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of James Rice
Sent: Friday, March 25, 2011 07:00
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Fuel Valve for F24

Gotta Love this group! Yesterday I took time away from my F24 project to
drain the fuel from my 7AC Champ so I could work on my dripping fuel shut
off valve. Off the Fairchild topic, but could I get the source and part
number for the fuel valve that you used for you're Champ?

Thanks
Jim Rice
jlrice2 (at) earthlink.net

----- Original Message -----
From: Joe Preston
To: fairchildclub@yahoogroups.com
Sent: 3/23/2011 9:01:07 AM
Subject: RE: [fairchildclub] Fuel Valve for F24

I have to admit that I am unfamiliar with the fuel valve setup here.
However, recently I was able to get approval to use the new AC 23-27 as a
means of approval to use a ball valve for replacement of a main fuel valve
shut off for a Champ. There are some caveats though. You can not modify the
operation linkage or means of installation of the valve. In other words, if
you can do a swap without having to modify anything, you should be able to
get approval. I had my local FSDO give it's blessing. This is the exact
scenario as to why this new AC was created. Ask your local IA or FSDO.

Joe

_____

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of dc871f
Sent: Tuesday, March 22, 2011 19:42
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Fuel Valve for F24

After discussions with members about fuel valves, has come to my attention
that there might be differences in the valves.

To anybody that would know, are there any STC's or mods out there to change
the originals valves out?

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

'

james chybicki · Post by **james chybicki** » Fri Mar 25, 2011 8:12 am

'Hi Group
I have 4 N.O.S. Fuel Valves Assemblies for the Fairchild 24 series airecraft and mabye many other types. They are complete with Brass Selector handle, Y-Coupling and 3 fittings with compression rings. I will post pictures of them into the Club site.
IF anyone is intrested, email me rampratone@yahoo.com These are the last ones
Keep 'Em Flying
Jim Chybicki
1943 UC-61K 43-14964 / Argus III HB-690

--- On Fri, 3/25/11, James Rice wrote:

> From: James Rice
> Subject: RE: [fairchildclub] Fuel Valve for F24
> To: fairchildclub@yahoogroups.com
> Date: Friday, March 25, 2011, 6:00 AM
> Gotta Love this group!
> Yesterday I took time away from my F24 project to drain the
> fuel from my 7AC
> Champ so I could work on my dripping fuel shut off
> valve. Off the Fairchild topic, but could I get the
> source
> and part number for the fuel valve that you used for you're
> Champ?
>
> Thanks
> Jim Rice
> jlrice2 (at) earthlink.net
>
>
> ----- Original Message -----
> From: Joe Preston
> To: fairchildclub@yahoogroups.com
> Sent: 3/23/2011 9:01:07 AM
> Subject: RE: [fairchildclub] Fuel Valve for F24
>
>
>
> I have to admit that I am unfamiliar with the fuel valve
> setup here.
> However, recently I was able to get approval to use the new
> AC 23-27 as a
> means of approval to use a ball valve for replacement of a
> main fuel valve
> shut off for a Champ. There are some caveats though. You
> can not modify the
> operation linkage or means of installation of the valve. In
> other words, if
> you can do a swap without having to modify anything, you
> should be able to
> get approval. I had my local FSDO give it's blessing. This
> is the exact
> scenario as to why this new AC was created. Ask your local
> IA or FSDO.
>
> Joe
>
>
> _____
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of dc871f
> Sent: Tuesday, March 22, 2011 19:42
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Fuel Valve for F24
>
> After discussions with members about fuel valves, has come
> to my attention
> that there might be differences in the valves.
>
> To anybody that would know, are there any STC's or mods out
> there to change
> the originals valves out?
>
> [Non-text portions of this message have been removed]
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
> fairchildclub-fullfeatured@yahoogroups.com
>
>
>

'

Tom_Downey · Post by **Tom_Downey** » Mon Mar 28, 2011 8:48 am

'I also have 2 used fuel valves that would like to go flying if you need them e-mail me with shipping instructions. nc19143(at)comcast.net

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi Group
> I have 4 N.O.S. Fuel Valves Assemblies for the Fairchild 24 series airecraft and mabye many other types. They are complete with Brass Selector handle, Y-Coupling and 3 fittings with compression rings. I will post pictures of them into the Club site.
> IF anyone is intrested, email me rampratone@... These are the last ones
> Keep 'Em Flying
> Jim Chybicki
> 1943 UC-61K 43-14964 / Argus III HB-690
>
>
>
> --- On Fri, 3/25/11, James Rice wrote:
>
> > From: James Rice
> > Subject: RE: [fairchildclub] Fuel Valve for F24
> > To: fairchildclub@yahoogroups.com
> > Date: Friday, March 25, 2011, 6:00 AM
> > Gotta Love this group!
> > Yesterday I took time away from my F24 project to drain the
> > fuel from my 7AC
> > Champ so I could work on my dripping fuel shut off
> > valve. Off the Fairchild topic, but could I get the
> > source
> > and part number for the fuel valve that you used for you're
> > Champ?
> >
> > Thanks
> > Jim Rice
> > jlrice2 (at) earthlink.net
> >
> >
> > ----- Original Message -----
> > From: Joe Preston
> > To: fairchildclub@yahoogroups.com
> > Sent: 3/23/2011 9:01:07 AM
> > Subject: RE: [fairchildclub] Fuel Valve for F24
> >
> >
> >
> > I have to admit that I am unfamiliar with the fuel valve
> > setup here.
> > However, recently I was able to get approval to use the new
> > AC 23-27 as a
> > means of approval to use a ball valve for replacement of a
> > main fuel valve
> > shut off for a Champ. There are some caveats though. You
> > can not modify the
> > operation linkage or means of installation of the valve. In
> > other words, if
> > you can do a swap without having to modify anything, you
> > should be able to
> > get approval. I had my local FSDO give it's blessing. This
> > is the exact
> > scenario as to why this new AC was created. Ask your local
> > IA or FSDO.
> >
> > Joe
> >
> >
> > _____
> >
> > From: fairchildclub@yahoogroups.com
> > [mailto:fairchildclub@yahoogroups.com]
> > On Behalf Of dc871f
> > Sent: Tuesday, March 22, 2011 19:42
> > To: fairchildclub@yahoogroups.com
> > Subject: [fairchildclub] Fuel Valve for F24
> >
> > After discussions with members about fuel valves, has come
> > to my attention
> > that there might be differences in the valves.
> >
> > To anybody that would know, are there any STC's or mods out
> > there to change
> > the originals valves out?
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> > fairchildclub-fullfeatured@yahoogroups.com
> >
> >
> >
>

'

burnmcc@aol.com · Post by **burnmcc@aol.com** » Mon Mar 28, 2011 11:06 am

'Jim:

Interested in the NOS valves. Could you call me at 508 274-1128?

Thanks.

Bill McClure

-----Original Message-----
From: Tom_Downey
To: fairchildclub@yahoogroups.com
Sent: Mon, Mar 28, 2011 10:42 am
Subject: [fairchildclub] Re: Fuel Valve for F24

I also have 2 used fuel valves that would like to go flying if you need them e-mail me with shipping instructions. nc19143(at)comcast.net

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi Group
> I have 4 N.O.S. Fuel Valves Assemblies for the Fairchild 24 series airecraft and mabye many other types. They are complete with Brass Selector handle, Y-Coupling and 3 fittings with compression rings. I will post pictures of them into the Club site.
> IF anyone is intrested, email me rampratone@... These are the last ones
> Keep 'Em Flying
> Jim Chybicki
> 1943 UC-61K 43-14964 / Argus III HB-690
>
>
>
> --- On Fri, 3/25/11, James Rice wrote:
>
> > From: James Rice
> > Subject: RE: [fairchildclub] Fuel Valve for F24
> > To: fairchildclub@yahoogroups.com
> > Date: Friday, March 25, 2011, 6:00 AM
> > Gotta Love this group!
> > Yesterday I took time away from my F24 project to drain the
> > fuel from my 7AC
> > Champ so I could work on my dripping fuel shut off
> > valve. Off the Fairchild topic, but could I get the
> > source
> > and part number for the fuel valve that you used for you're
> > Champ?
> >
> > Thanks
> > Jim Rice
> > jlrice2 (at) earthlink.net
> >
> >
> > ----- Original Message -----
> > From: Joe Preston
> > To: fairchildclub@yahoogroups.com
> > Sent: 3/23/2011 9:01:07 AM
> > Subject: RE: [fairchildclub] Fuel Valve for F24
> >
> >
> >
> > I have to admit that I am unfamiliar with the fuel valve
> > setup here.
> > However, recently I was able to get approval to use the new
> > AC 23-27 as a
> > means of approval to use a ball valve for replacement of a
> > main fuel valve
> > shut off for a Champ. There are some caveats though. You
> > can not modify the
> > operation linkage or means of installation of the valve. In
> > other words, if
> > you can do a swap without having to modify anything, you
> > should be able to
> > get approval. I had my local FSDO give it's blessing. This
> > is the exact
> > scenario as to why this new AC was created. Ask your local
> > IA or FSDO.
> >
> > Joe
> >
> >
> > _____
> >
> > From: fairchildclub@yahoogroups.com
> > [mailto:fairchildclub@yahoogroups.com]
> > On Behalf Of dc871f
> > Sent: Tuesday, March 22, 2011 19:42
> > To: fairchildclub@yahoogroups.com
> > Subject: [fairchildclub] Fuel Valve for F24
> >
> > After discussions with members about fuel valves, has come
> > to my attention
> > that there might be differences in the valves.
> >
> > To anybody that would know, are there any STC's or mods out
> > there to change
> > the originals valves out?
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> > fairchildclub-fullfeatured@yahoogroups.com
> >
> >
> >
>

[Non-text portions of this message have been removed]

'