Re: Landing Light Gear or Landing light needed

[buellpowell]

'I am looking for either the large (apx 3 1/8") gear for the original landing light for my 1946 F24R or if someone has a light (working or not as long as the gear is OK ) Also I have an extra rudder in good condition and 2 extra vertical stabilizers to sell or trade if anyone needs them.
Thanks in advance
Buell Powell
NC 81330-1946 F24R'

[Tom_Downey]

'I have the gear you need. send me your address, and I'll ship it.

nc19143(at)comcast.net

Tom Downey

--- In fairchildclub@yahoogroups.com, "buellpowell" wrote:
>
> I am looking for either the large (apx 3 1/8") gear for the original landing light for my 1946 F24R or if someone has a light (working or not as long as the gear is OK ) Also I have an extra rudder in good condition and 2 extra vertical stabilizers to sell or trade if anyone needs them.
> Thanks in advance
> Buell Powell
> NC 81330-1946 F24R
>

'

[Jay Thomson]

'Would you happen to have the fairing that goes from the fuselage to the vertical stab for a 24R 46A?
Thanks! 

--- On Wed, 12/22/10, Tom_Downey wrote:


From: Tom_Downey
Subject: [fairchildclub] Re: Landing Light Gear or Landing light needed
To: fairchildclub@yahoogroups.com
Date: Wednesday, December 22, 2010, 11:33 AM


 



I have the gear you need. send me your address, and I'll ship it.

nc19143(at)comcast.net

Tom Downey

--- In fairchildclub@yahoogroups.com, "buellpowell" wrote:
>
> I am looking for either the large (apx 3 1/8") gear for the original landing light for my 1946 F24R or if someone has a light (working or not as long as the gear is OK ) Also I have an extra rudder in good condition and 2 extra vertical stabilizers to sell or trade if anyone needs them.
> Thanks in advance
> Buell Powell
> NC 81330-1946 F24R
>











[Non-text portions of this message have been removed]

'

[Tom_Downey]

'I do not have any fairings unless you would like to buy mine, it has a very nice 24 attached

--- In fairchildclub@yahoogroups.com, Jay Thomson wrote:
>
> Would you happen to have the fairing that goes from the fuselage to the vertical stab for a 24R 46A?
> Thanks! 

'

[Tom_Downey]

'I do not have any fairings unless you would like to buy mine, it has a very nice 24 attached

--- In fairchildclub@yahoogroups.com, Jay Thomson wrote:
>
> Would you happen to have the fairing that goes from the fuselage to the vertical stab for a 24R 46A?
> Thanks! 

'

[buellpowell]

'Tom,
We just got in from visiting my parents for Christmas. I tried to send a reply by web post but couldn't get it to send from there @ sent an e-mail but not sure it was sent either- My mailing address is PO Box 571, San Marcos, Tx. 78667. Please let me know how much I need to send for the gear and shipping.
Thank You,
Buell Powell
NC 81330
1946 F24R

--- In fairchildclub@yahoogroups.com, "Tom_Downey" wrote:
>
> I have the gear you need. send me your address, and I'll ship it.
>
> nc19143(at)comcast.net
>
> Tom Downey
>
>
>
> --- In fairchildclub@yahoogroups.com, "buellpowell" wrote:
> >
> > I am looking for either the large (apx 3 1/8") gear for the original landing light for my 1946 F24R or if someone has a light (working or not as long as the gear is OK ) Also I have an extra rudder in good condition and 2 extra vertical stabilizers to sell or trade if anyone needs them.
> > Thanks in advance
> > Buell Powell
> > NC 81330-1946 F24R
> >
>

'

[OldOOwl@aol.com]

'Also, If you are looking for a 1946 F24 tailwheel strut and fork: Dan Wine
720-253-7444
_danmarwine@comcast.net_ (mailto:danmarwine@comcast.net)

Richard Hawley
NC19105


In a message dated 12/27/2010 4:37:41 P.M. Mountain Standard Time,
bhpowell@gvtc.com writes:




Tom,
We just got in from visiting my parents for Christmas. I tried to send a
reply by web post but couldn't get it to send from there @ sent an e-mail
but not sure it was sent either- My mailing address is PO Box 571, San
Marcos, Tx. 78667. Please let me know how much I need to send for the gear and
shipping.
Thank You,
Buell Powell
NC 81330
1946 F24R

--- In _fairchildclub@yahoogroups.com_
(mailto:fairchildclub@yahoogroups.com) , "Tom_Downey" wrote:

>
> I have the gear you need. send me your address, and I'll ship it.
>
> nc19143(at)comcast.net
>
> Tom Downey
>
>
>
> --- In _fairchildclub@yahoogroups.com_

(mailto:fairchildclub@yahoogroups.com) , "buellpowell" wrote:

> >
> > I am looking for either the large (apx 3 1/8") gear for the original

landing light for my 1946 F24R or if someone has a light (working or not as
long as the gear is OK ) Also I have an extra rudder in good condition and
2 extra vertical stabilizers to sell or trade if anyone needs them.

> > Thanks in advance
> > Buell Powell
> > NC 81330-1946 F24R
> >
>

[Non-text portions of this message have been removed]'

[Tom_Downey]

'My E-Mail is,
nc19143(at)comcast.net

replace (at) with a @ and it will work, because this stupid yahoo page will scrub the address If I try to link you to my address.

this web page return address is wrong, and will not up date to the new address because I am not a Yahoo subscriber, so do not use reply to send me a message.
------------------------------------------------------------------------
Tom,
WE just got in from visiting my parents for Christmas. I tried to send a reply by web post but couldn't get it to send from there @ sent an e-mail but not sure it was sent either- My mailing address is PO Box 571, San Marcos, Tx. 78667. Please let me know how much I need to send for the gear and shipping.
Thank You,
Buell Powell
NC 81330
1946 F24R'

[Tom_Downey]

'Your gear went out this morning, (USPS) to the Address given.'

[buellpowell]

'Tom
I really appreciate the help--I have the wing finished except for installing the aileron and flap and found that the light has problems. After checking it looks like all it needs is that gear and a good cleaning and lubricating.
Thanks again,
Buell

--- In fairchildclub@yahoogroups.com, "Tom_Downey" wrote:
>
>
> Your gear went out this morning, (USPS) to the Address given.
>

'