Re: Looking for a PT19 or 26 project.

Hugh Loewenhardt · Post by **Hugh Loewenhardt** » Mon Oct 25, 2010 8:40 pm

'I am in need of a type B (flanged) Grimes tail light for my restoration project. The condition of the light internals is not important as I have the internal parts. I need only the body casting. If any member has a light available for sale, please provide contact information.

>
> Hugh Loewenhardt
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> What is the status of the project and how complete
> the many parts?
>
>
>
> Fritz
>
>
>
> San Diego, CA. 92056
>
>
>
> -----Original Message-----
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]
>
> On Behalf Of BOB DUNN
>
> Sent: Thursday, October 07, 2010 2:17 AM
>
> To: fairchildclub@yahoogroups.com
>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> Nacogdoches, Texas North of Houston & SW of
> Shreveport, Louisiana.
>
>
>
> --- On Wed, 10/6/10, Fritz
> wrote:
>
>
>
> From: Fritz
>
>
>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Date: Wednesday, October 6, 2010, 11:08 PM
>
>
>
> Your project sounds like interesting. I am in San Diego,
> where are
>
> you?
>
>
>
> -----Original Message-----
>
>
>
> From: fairchildclub@yahoogroups.com
> [mailto:fairchildclub@yahoogroups.com]
>
>
>
> On Behalf Of BOB DUNN
>
>
>
> Sent: Wednesday, October 06, 2010 8:34 PM
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Subject: Re: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> I have a PT-26 project I bought to rebuild for my best
> friend to fly. We
>
>
>
> were actually going to not use the canopy and make it like
> a PT-19 so we
>
>
>
> would have a pair to fly together. However, he was killed
> while checking out
>
>
>
> in a BT-13, so I've lost interest in the restoration.
>
>
>
> Everything is off the fuselage which is ready for cleaning
> ,
>
>
>
> priming/painting etc. the vertical stabilizer is ready. The
> ailerons &
>
>
>
> elevators are up through silver. The cover has been removed
> from the center
>
>
>
> section for cleaning, inspection & some rebuilding. I
> have the wood ribs
>
>
>
> already built for the cs. I was going to do a engine
> tear-down and see what
>
>
>
> it needs. Probable needs new rings...at least a top
> overhaul and a good
>
>
>
> cleaning & inspection. It came with a electric prop,
> but I would have gone
>
>
>
> back to a wood prop.The canopy is apart for cleaning,
> painting and glass
>
>
>
> replacement where needed. It has metal flaps and
> floorboards, but no heater
>
>
>
> installation. This could be added for cold climes.I am
> asking $10,000.00 but
>
>
>
> would allow $1,000.00 for transportation. You probably have
> a good idea of
>
>
>
> the size trailer and truck needed for transport. I believe
> I have most all
>
>
>
> the logs/paperwork. I wish the situation had been different
> so my friend and
>
>
>
> I could
>
>
>
> have had "twin" PT's to fly.
>
>
>
> Bob Dunn 936-564-7212 C-936-569-3287
>
>
>
> --- On Wed, 10/6/10, stinsonman2000
> wrote:
>
>
>
> From: stinsonman2000
>
>
>
> Subject: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com
>
>
>
> Date: Wednesday, October 6, 2010, 7:38 PM
>
>
>
> Looking for a PT19 or 26 project. Prefer a complete plane
> but will
>
>
>
> consider what ever is available. I live in Pa. but am
> willing to travel for
>
>
>
> a good one.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> http://groups.yahoo.com/group/fairchildclub/
>
>
>
> Individual Email | Traditional
>
>
>
> http://groups.yahoo.com/group/fairchildclub/join
>
>
>
> (Yahoo! ID required)
>
>
>
> fairchildclub-digest@yahoogroups.com
>
>
>
>
> fairchildclub-fullfeatured@yahoogroups.com
>
>
>
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> http://docs.yahoo.com/info/terms/
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

'

Fritz · Post by **Fritz** » Mon Oct 25, 2010 10:32 pm

'At this time, I have decided to do the PT-19. Do you have the parts to
convert the 26 to a 19?
Fritz

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of BOB DUNN
Sent: Monday, October 25, 2010 7:32 PM
To: fairchildclub@yahoogroups.com
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

It's a complete project

--- On Mon, 10/25/10, Fritz wrote:

From: Fritz
Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.
To: fairchildclub@yahoogroups.com
Date: Monday, October 25, 2010, 9:06 PM

What is the status of the project and how complete the many parts?

Fritz

San Diego, CA. 92056

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Thursday, October 07, 2010 2:17 AM

To: fairchildclub@yahoogroups.com

Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

Nacogdoches, Texas North of Houston & SW of Shreveport, Louisiana.

--- On Wed, 10/6/10, Fritz wrote:

From: Fritz

Subject: RE: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 11:08 PM

Your project sounds like interesting. I am in San Diego, where are

you?

-----Original Message-----

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]

On Behalf Of BOB DUNN

Sent: Wednesday, October 06, 2010 8:34 PM

To: fairchildclub@yahoogroups.com

Subject: Re: [fairchildclub] Looking for a PT19 or 26 project.

I have a PT-26 project I bought to rebuild for my best friend to fly. We

were actually going to not use the canopy and make it like a PT-19 so we

would have a pair to fly together. However, he was killed while checking out

in a BT-13, so I've lost interest in the restoration.

Everything is off the fuselage which is ready for cleaning ,

priming/painting etc. the vertical stabilizer is ready. The ailerons &

elevators are up through silver. The cover has been removed from the center

section for cleaning, inspection & some rebuilding. I have the wood ribs

already built for the cs. I was going to do a engine tear-down and see what

it needs. Probable needs new rings...at least a top overhaul and a good

cleaning & inspection. It came with a electric prop, but I would have gone

back to a wood prop.The canopy is apart for cleaning, painting and glass

replacement where needed. It has metal flaps and floorboards, but no heater

installation. This could be added for cold climes.I am asking $10,000.00 but

would allow $1,000.00 for transportation. You probably have a good idea of

the size trailer and truck needed for transport. I believe I have most all

the logs/paperwork. I wish the situation had been different so my friend and

I could

have had "twin" PT's to fly.

Bob Dunn 936-564-7212 C-936-569-3287

--- On Wed, 10/6/10, stinsonman2000 wrote:

From: stinsonman2000

Subject: [fairchildclub] Looking for a PT19 or 26 project.

To: fairchildclub@yahoogroups.com

Date: Wednesday, October 6, 2010, 7:38 PM

Looking for a PT19 or 26 project. Prefer a complete plane but will

consider what ever is available. I live in Pa. but am willing to travel for

a good one.

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

http://groups.yahoo.com/group/fairchildclub/

Individual Email | Traditional

http://groups.yahoo.com/group/fairchildclub/join

(Yahoo! ID required)

fairchildclub-digest@yahoogroups.com

fairchildclub-fullfeatured@yahoogroups.com

fairchildclub-unsubscribe@yahoogroups.com

http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links

'

Fritz · Post by **Fritz** » Mon Oct 25, 2010 11:06 pm

'Bob,
Did you get it as a complete flying airplane or was it already disassembled?
Do you have any before and after photos?
Fritz
avdflyr@cox.net'

Stuart Burgess · Post by **Stuart Burgess** » Tue Oct 26, 2010 2:53 am

'Hi Guys

Recently I enquired unsuccessfully as to whether any of you knew of a replacement pitot for my 61K project. I am now looking at rebuilding mine from salvaged useable parts such as the main head etc. I would probably be able to draw it up from the bits that I have which have been bent and cut up, but was wondering if anyone perhaps has a drawing of this item. I have the Fairchild club drawing CD, but the pitot does not appear on it.

Any help would be appreciated.

Regards

Stuart'

Michael Denest · Post by **Michael Denest** » Tue Oct 26, 2010 5:38 am

'Locate a copy of Fairchild Service Bulletin NO. 45-62-9 which contains a drawing
of the mast. Although it is for the M-62 series airplane, the service bulletin
shortens the mast length for mounting at the wing tip. The object is to reduce
mast flexing.

Mike

"He's crazy Lew, he builds toy airplanes".
- Capt. Frank Towns
Flight of the Phoenix

________________________________
From: Stuart Burgess
To: fairchildclub@yahoogroups.com
Sent: Tue, October 26, 2010 4:53:46 AM
Subject: [fairchildclub] UC61K Pitot

Hi Guys

Recently I enquired unsuccessfully as to whether any of you knew of a
replacement pitot for my 61K project. I am now looking at rebuilding mine from
salvaged useable parts such as the main head etc. I would probably be able to
draw it up from the bits that I have which have been bent and cut up, but was
wondering if anyone perhaps has a drawing of this item. I have the Fairchild
club drawing CD, but the pitot does not appear on it.

Any help would be appreciated.

Regards

Stuart

[Non-text portions of this message have been removed]'

Stuart Burgess · Post by **Stuart Burgess** » Tue Oct 26, 2010 5:39 am

'Thanks Mike

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com] On Behalf Of Michael Denest
Sent: 26 October 2010 01:38 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] UC61K Pitot

Locate a copy of Fairchild Service Bulletin NO. 45-62-9 which contains a drawing
of the mast. Although it is for the M-62 series airplane, the service bulletin
shortens the mast length for mounting at the wing tip. The object is to reduce
mast flexing.

Mike

"He's crazy Lew, he builds toy airplanes".
- Capt. Frank Towns
Flight of the Phoenix

________________________________
From: Stuart Burgess
To: fairchildclub@yahoogroups.com
Sent: Tue, October 26, 2010 4:53:46 AM
Subject: [fairchildclub] UC61K Pitot

Hi Guys

Recently I enquired unsuccessfully as to whether any of you knew of a
replacement pitot for my 61K project. I am now looking at rebuilding mine from
salvaged useable parts such as the main head etc. I would probably be able to
draw it up from the bits that I have which have been bent and cut up, but was
wondering if anyone perhaps has a drawing of this item. I have the Fairchild
club drawing CD, but the pitot does not appear on it.

Any help would be appreciated.

Regards

Stuart

[Non-text portions of this message have been removed]

------------------------------------

Yahoo! Groups Links'

Leighton, George · Post by **Leighton, George** » Tue Oct 26, 2010 8:18 am

'Check with these guys they have everything Grimes
http://www.avliteaviation.com/Product%20links/vintage.htm

George

________________________________

From: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] On Behalf Of Hugh Loewenhardt
Sent: Monday, October 25, 2010 7:40 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Grimes Type B Tail light

I am in need of a type B (flanged) Grimes tail light for my restoration
project. The condition of the light internals is not important as I have
the internal parts. I need only the body casting. If any member has a
light available for sale, please provide contact information.

>
> Hugh Loewenhardt
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> What is the status of the project and how complete
> the many parts?
>
>
>
> Fritz
>
>
>
> San Diego, CA. 92056
>
>
>
> -----Original Message-----
>
> From: fairchildclub@yahoogroups.com

> [mailto:fairchildclub@yahoogroups.com

]

>
> On Behalf Of BOB DUNN
>
> Sent: Thursday, October 07, 2010 2:17 AM
>
> To: fairchildclub@yahoogroups.com

>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> Nacogdoches, Texas North of Houston & SW of
> Shreveport, Louisiana.
>
>
>
> --- On Wed, 10/6/10, Fritz
> wrote:
>
>
>
> From: Fritz
>
>
>
> Subject: RE: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com

>
>
>
> Date: Wednesday, October 6, 2010, 11:08 PM
>
>
>
> Your project sounds like interesting. I am in San Diego,
> where are
>
> you?
>
>
>
> -----Original Message-----
>
>
>
> From: fairchildclub@yahoogroups.com

> [mailto:fairchildclub@yahoogroups.com

]

>
>
>
> On Behalf Of BOB DUNN
>
>
>
> Sent: Wednesday, October 06, 2010 8:34 PM
>
>
>
> To: fairchildclub@yahoogroups.com

>
>
>
> Subject: Re: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> I have a PT-26 project I bought to rebuild for my best
> friend to fly. We
>
>
>
> were actually going to not use the canopy and make it like
> a PT-19 so we
>
>
>
> would have a pair to fly together. However, he was killed
> while checking out
>
>
>
> in a BT-13, so I've lost interest in the restoration.
>
>
>
> Everything is off the fuselage which is ready for cleaning
> ,
>
>
>
> priming/painting etc. the vertical stabilizer is ready. The
> ailerons &
>
>
>
> elevators are up through silver. The cover has been removed
> from the center
>
>
>
> section for cleaning, inspection & some rebuilding. I
> have the wood ribs
>
>
>
> already built for the cs. I was going to do a engine
> tear-down and see what
>
>
>
> it needs. Probable needs new rings...at least a top
> overhaul and a good
>
>
>
> cleaning & inspection. It came with a electric prop,
> but I would have gone
>
>
>
> back to a wood prop.The canopy is apart for cleaning,
> painting and glass
>
>
>
> replacement where needed. It has metal flaps and
> floorboards, but no heater
>
>
>
> installation. This could be added for cold climes.I am
> asking $10,000.00 but
>
>
>
> would allow $1,000.00 for transportation. You probably have
> a good idea of
>
>
>
> the size trailer and truck needed for transport. I believe
> I have most all
>
>
>
> the logs/paperwork. I wish the situation had been different
> so my friend and
>
>
>
> I could
>
>
>
> have had "twin" PT's to fly.
>
>
>
> Bob Dunn 936-564-7212 C-936-569-3287
>
>
>
> --- On Wed, 10/6/10, stinsonman2000
> wrote:
>
>
>
> From: stinsonman2000
>
>
>
> Subject: [fairchildclub] Looking for a PT19 or 26
> project.
>
>
>
> To: fairchildclub@yahoogroups.com

>
>
>
> Date: Wednesday, October 6, 2010, 7:38 PM
>
>
>
> Looking for a PT19 or 26 project. Prefer a complete plane
> but will
>
>
>
> consider what ever is available. I live in Pa. but am
> willing to travel for
>
>
>
> a good one.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
> http://groups.yahoo.com/group/fairchildclub/
>
>
>
> Individual Email | Traditional
>
>
>
> http://groups.yahoo.com/group/fairchildclub/join
>
>
>
> (Yahoo! ID required)
>
>
>
> fairchildclub-digest@yahoogroups.com

>
>
>
>
> fairchildclub-fullfeatured@yahoogroups.com

>
>
>
> fairchildclub-unsubscribe@yahoogroups.com

>
>
>
> http://docs.yahoo.com/info/terms/
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

[Non-text portions of this message have been removed]'

Hugh Loewenhardt · Post by **Hugh Loewenhardt** » Tue Oct 26, 2010 1:10 pm

'Thanks George, Avlite does have the complete light assembly but I wanted just the type B casting so I could build up a type B assembly using the parts from a type A light I have on hand. I have now located a type B casting, which requires weld repair, so I can put some sweat equity into it and have the unit I need. I'm happy with that unless some member has a unit which does not require weld repair. I would be interested in it.
Hugh L

--- On Tue, 10/26/10, Leighton, George wrote:

> From: Leighton, George
> Subject: RE: [fairchildclub] Grimes Type B Tail light
> To: fairchildclub@yahoogroups.com
> Date: Tuesday, October 26, 2010, 2:18 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Check with these guys they have everything Grimes
>
> http://www.avliteaviation.com/Product%20links/vintage.htm
>
>
>
> George
>
>
>
> ________________________________
>
>
>
> From: fairchildclub@yahoogroups.com
>
> [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Hugh Loewenhardt
>
> Sent: Monday, October 25, 2010 7:40 PM
>
> To: fairchildclub@yahoogroups.com
>
> Subject: [fairchildclub] Grimes Type B Tail light
>
>
>
> I am in need of a type B (flanged) Grimes tail light for my
> restoration
>
> project. The condition of the light internals is not
> important as I have
>
> the internal parts. I need only the body casting. If any
> member has a
>
> light available for sale, please provide contact
> information.
>
> >
>
> > Hugh Loewenhardt
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > What is the status of the project and how complete
>
> > the many parts?
>
> >
>
> >
>
> >
>
> > Fritz
>
> >
>
> >
>
> >
>
> > San Diego, CA. 92056
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
>
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ]
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> > Sent: Thursday, October 07, 2010 2:17 AM
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > Nacogdoches, Texas North of Houston & SW of
>
> > Shreveport, Louisiana.
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, Fritz
>
> >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: Fritz >
>
> >
>
> >
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 11:08 PM
>
> >
>
> >
>
> >
>
> > Your project sounds like interesting. I am in San
> Diego,
>
> > where are
>
> >
>
> > you?
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> >
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
>
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ]
>
> >
>
> >
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> >
>
> >
>
> > Sent: Wednesday, October 06, 2010 8:34 PM
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Subject: Re: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > I have a PT-26 project I bought to rebuild for my
> best
>
> > friend to fly. We
>
> >
>
> >
>
> >
>
> > were actually going to not use the canopy and make it
> like
>
> > a PT-19 so we
>
> >
>
> >
>
> >
>
> > would have a pair to fly together. However, he was
> killed
>
> > while checking out
>
> >
>
> >
>
> >
>
> > in a BT-13, so I've lost interest in the
> restoration.
>
> >
>
> >
>
> >
>
> > Everything is off the fuselage which is ready for
> cleaning
>
> > ,
>
> >
>
> >
>
> >
>
> > priming/painting etc. the vertical stabilizer is
> ready. The
>
> > ailerons &
>
> >
>
> >
>
> >
>
> > elevators are up through silver. The cover has been
> removed
>
> > from the center
>
> >
>
> >
>
> >
>
> > section for cleaning, inspection & some
> rebuilding. I
>
> > have the wood ribs
>
> >
>
> >
>
> >
>
> > already built for the cs. I was going to do a engine
>
> > tear-down and see what
>
> >
>
> >
>
> >
>
> > it needs. Probable needs new rings...at least a top
>
> > overhaul and a good
>
> >
>
> >
>
> >
>
> > cleaning & inspection. It came with a electric
> prop,
>
> > but I would have gone
>
> >
>
> >
>
> >
>
> > back to a wood prop.The canopy is apart for cleaning,
>
> > painting and glass
>
> >
>
> >
>
> >
>
> > replacement where needed. It has metal flaps and
>
> > floorboards, but no heater
>
> >
>
> >
>
> >
>
> > installation. This could be added for cold climes.I
> am
>
> > asking $10,000.00 but
>
> >
>
> >
>
> >
>
> > would allow $1,000.00 for transportation. You probably
> have
>
> > a good idea of
>
> >
>
> >
>
> >
>
> > the size trailer and truck needed for transport. I
> believe
>
> > I have most all
>
> >
>
> >
>
> >
>
> > the logs/paperwork. I wish the situation had been
> different
>
> > so my friend and
>
> >
>
> >
>
> >
>
> > I could
>
> >
>
> >
>
> >
>
> > have had "twin" PT's to fly.
>
> >
>
> >
>
> >
>
> > Bob Dunn 936-564-7212 C-936-569-3287
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, stinsonman2000
> >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: stinsonman2000
> >
>
> >
>
> >
>
> >
>
> > Subject: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 7:38 PM
>
> >
>
> >
>
> >
>
> > Looking for a PT19 or 26 project. Prefer a complete
> plane
>
> > but will
>
> >
>
> >
>
> >
>
> > consider what ever is available. I live in Pa. but am
>
> > willing to travel for
>
> >
>
> >
>
> >
>
> > a good one.
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/
>
> >
>
> >
>
> >
>
> > Individual Email | Traditional
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/join
>
> >
>
> >
>
> >
>
> > (Yahoo! ID required)
>
> >
>
> >
>
> >
>
> > fairchildclub-digest@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> >
>
> > fairchildclub-fullfeatured@yahoogroups.com
>
>
>
>
> >
>
> >
>
> >
>
> > fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>
> >
>
> >
>
> >
>
> > http://docs.yahoo.com/info/terms/
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

'

David Stroud · Post by **David Stroud** » Tue Oct 26, 2010 1:43 pm

'Hugh, if it is an aluminum or white metal type material that needs repair, there's a product
out that will allow the home handyman to fix it with only a propane torch. It's brazing, not welding.
Stronger than original material, you can file it, drill it, chrome plate it etc.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: Hugh Loewenhardt
To: fairchildclub@yahoogroups.com
Sent: Tuesday, October 26, 2010 3:10 PM
Subject: RE: [fairchildclub] Grimes Type B Tail light

Thanks George, Avlite does have the complete light assembly but I wanted just the type B casting so I could build up a type B assembly using the parts from a type A light I have on hand. I have now located a type B casting, which requires weld repair, so I can put some sweat equity into it and have the unit I need. I'm happy with that unless some member has a unit which does not require weld repair. I would be interested in it.
Hugh L

--- On Tue, 10/26/10, Leighton, George wrote:

> From: Leighton, George
> Subject: RE: [fairchildclub] Grimes Type B Tail light
> To: fairchildclub@yahoogroups.com
> Date: Tuesday, October 26, 2010, 2:18 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Check with these guys they have everything Grimes
>
> http://www.avliteaviation.com/Product%20links/vintage.htm
>
>
>
> George
>
>
>
> ________________________________
>
>
>
> From: fairchildclub@yahoogroups.com
>
> [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Hugh Loewenhardt
>
> Sent: Monday, October 25, 2010 7:40 PM
>
> To: fairchildclub@yahoogroups.com
>
> Subject: [fairchildclub] Grimes Type B Tail light
>
>
>
> I am in need of a type B (flanged) Grimes tail light for my
> restoration
>
> project. The condition of the light internals is not
> important as I have
>
> the internal parts. I need only the body casting. If any
> member has a
>
> light available for sale, please provide contact
> information.
>
> >
>
> > Hugh Loewenhardt
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > What is the status of the project and how complete
>
> > the many parts?
>
> >
>
> >
>
> >
>
> > Fritz
>
> >
>
> >
>
> >
>
> > San Diego, CA. 92056
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
>
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ]
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> > Sent: Thursday, October 07, 2010 2:17 AM
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > Nacogdoches, Texas North of Houston & SW of
>
> > Shreveport, Louisiana.
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, Fritz
>
> >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: Fritz >
>
> >
>
> >
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 11:08 PM
>
> >
>
> >
>
> >
>
> > Your project sounds like interesting. I am in San
> Diego,
>
> > where are
>
> >
>
> > you?
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> >
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
>
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ]
>
> >
>
> >
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> >
>
> >
>
> > Sent: Wednesday, October 06, 2010 8:34 PM
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Subject: Re: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > I have a PT-26 project I bought to rebuild for my
> best
>
> > friend to fly. We
>
> >
>
> >
>
> >
>
> > were actually going to not use the canopy and make it
> like
>
> > a PT-19 so we
>
> >
>
> >
>
> >
>
> > would have a pair to fly together. However, he was
> killed
>
> > while checking out
>
> >
>
> >
>
> >
>
> > in a BT-13, so I've lost interest in the
> restoration.
>
> >
>
> >
>
> >
>
> > Everything is off the fuselage which is ready for
> cleaning
>
> > ,
>
> >
>
> >
>
> >
>
> > priming/painting etc. the vertical stabilizer is
> ready. The
>
> > ailerons &
>
> >
>
> >
>
> >
>
> > elevators are up through silver. The cover has been
> removed
>
> > from the center
>
> >
>
> >
>
> >
>
> > section for cleaning, inspection & some
> rebuilding. I
>
> > have the wood ribs
>
> >
>
> >
>
> >
>
> > already built for the cs. I was going to do a engine
>
> > tear-down and see what
>
> >
>
> >
>
> >
>
> > it needs. Probable needs new rings...at least a top
>
> > overhaul and a good
>
> >
>
> >
>
> >
>
> > cleaning & inspection. It came with a electric
> prop,
>
> > but I would have gone
>
> >
>
> >
>
> >
>
> > back to a wood prop.The canopy is apart for cleaning,
>
> > painting and glass
>
> >
>
> >
>
> >
>
> > replacement where needed. It has metal flaps and
>
> > floorboards, but no heater
>
> >
>
> >
>
> >
>
> > installation. This could be added for cold climes.I
> am
>
> > asking $10,000.00 but
>
> >
>
> >
>
> >
>
> > would allow $1,000.00 for transportation. You probably
> have
>
> > a good idea of
>
> >
>
> >
>
> >
>
> > the size trailer and truck needed for transport. I
> believe
>
> > I have most all
>
> >
>
> >
>
> >
>
> > the logs/paperwork. I wish the situation had been
> different
>
> > so my friend and
>
> >
>
> >
>
> >
>
> > I could
>
> >
>
> >
>
> >
>
> > have had "twin" PT's to fly.
>
> >
>
> >
>
> >
>
> > Bob Dunn 936-564-7212 C-936-569-3287
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, stinsonman2000
> >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: stinsonman2000
> >
>
> >
>
> >
>
> >
>
> > Subject: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 7:38 PM
>
> >
>
> >
>
> >
>
> > Looking for a PT19 or 26 project. Prefer a complete
> plane
>
> > but will
>
> >
>
> >
>
> >
>
> > consider what ever is available. I live in Pa. but am
>
> > willing to travel for
>
> >
>
> >
>
> >
>
> > a good one.
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/
>
> >
>
> >
>
> >
>
> > Individual Email | Traditional
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/join
>
> >
>
> >
>
> >
>
> > (Yahoo! ID required)
>
> >
>
> >
>
> >
>
> > fairchildclub-digest@yahoogroups.com
>
>
>
> >
>
> >
>
> >
>
> >
>
> > fairchildclub-fullfeatured@yahoogroups.com
>
>
>
>
> >
>
> >
>
> >
>
> > fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>
> >
>
> >
>
> >
>
> > http://docs.yahoo.com/info/terms/
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3220 - Release Date: 10/26/10 06:34:00

[Non-text portions of this message have been removed]

'

Gene Haines · Post by **Gene Haines** » Tue Oct 26, 2010 1:49 pm

'Cool, but what is the product name?

-----Original Message-----
From: DAVID STROUD
To: fairchildclub@yahoogroups.com
Sent: Tue, Oct 26, 2010 3:43 pm
Subject: Re: [fairchildclub] Grimes Type B Tail light

Hugh, if it is an aluminum or white metal type material that needs repair, there's a product
out that will allow the home handyman to fix it with only a propane torch. It's brazing, not welding.
Stronger than original material, you can file it, drill it, chrome plate it etc.

David Stroud Ottawa, Canada
Christavia C-FDWS
Fairchild 51 replica
under construction C-FYXV

----- Original Message -----
From: Hugh Loewenhardt
To: fairchildclub@yahoogroups.com
Sent: Tuesday, October 26, 2010 3:10 PM
Subject: RE: [fairchildclub] Grimes Type B Tail light

Thanks George, Avlite does have the complete light assembly but I wanted just the type B casting so I could build up a type B assembly using the parts from a type A light I have on hand. I have now located a type B casting, which requires weld repair, so I can put some sweat equity into it and have the unit I need. I'm happy with that unless some member has a unit which does not require weld repair. I would be interested in it.
Hugh L

--- On Tue, 10/26/10, Leighton, George wrote:

> From: Leighton, George
> Subject: RE: [fairchildclub] Grimes Type B Tail light
> To: fairchildclub@yahoogroups.com
> Date: Tuesday, October 26, 2010, 2:18 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Check with these guys they have everything Grimes
>
> http://www.avliteaviation.com/Product%20links/vintage.htm
>
>
>
> George
>
>
>
> ________________________________
>
>
>
> From: fairchildclub@yahoogroups.com
>
> [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Hugh Loewenhardt
>
> Sent: Monday, October 25, 2010 7:40 PM
>
> To: fairchildclub@yahoogroups.com
>
> Subject: [fairchildclub] Grimes Type B Tail light
>
>
>
> I am in need of a type B (flanged) Grimes tail light for my
> restoration
>
> project. The condition of the light internals is not
> important as I have
>
> the internal parts. I need only the body casting. If any
> member has a
>
> light available for sale, please provide contact
> information.
>
> >
>
> > Hugh Loewenhardt
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> > What is the status of the project and how complete
>
> > the many parts?
>
> >
>
> >
>
> >
>
> > Fritz
>
> >
>
> >
>
> >
>
> > San Diego, CA. 92056
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
> ;
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ; ]
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> > Sent: Thursday, October 07, 2010 2:17 AM
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
> ;
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > Nacogdoches, Texas North of Houston & SW of
>
> > Shreveport, Louisiana.
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, Fritz ;
>
> >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: Fritz ; >
>
> >
>
> >
>
> >
>
> > Subject: RE: [fairchildclub] Looking for a PT19 or 26
>
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
> ;
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 11:08 PM
>
> >
>
> >
>
> >
>
> > Your project sounds like interesting. I am in San
> Diego,
>
> > where are
>
> >
>
> > you?
>
> >
>
> >
>
> >
>
> > -----Original Message-----
>
> >
>
> >
>
> >
>
> > From: fairchildclub@yahoogroups.com
>
> ;
>
> > [mailto:fairchildclub@yahoogroups.com
>
> ; ]
>
> >
>
> >
>
> >
>
> > On Behalf Of BOB DUNN
>
> >
>
> >
>
> >
>
> > Sent: Wednesday, October 06, 2010 8:34 PM
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
> ;
>
> >
>
> >
>
> >
>
> > Subject: Re: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > I have a PT-26 project I bought to rebuild for my
> best
>
> > friend to fly. We
>
> >
>
> >
>
> >
>
> > were actually going to not use the canopy and make it
> like
>
> > a PT-19 so we
>
> >
>
> >
>
> >
>
> > would have a pair to fly together. However, he was
> killed
>
> > while checking out
>
> >
>
> >
>
> >
>
> > in a BT-13, so I've lost interest in the
> restoration.
>
> >
>
> >
>
> >
>
> > Everything is off the fuselage which is ready for
> cleaning
>
> > ,
>
> >
>
> >
>
> >
>
> > priming/painting etc. the vertical stabilizer is
> ready. The
>
> > ailerons &
>
> >
>
> >
>
> >
>
> > elevators are up through silver. The cover has been
> removed
>
> > from the center
>
> >
>
> >
>
> >
>
> > section for cleaning, inspection & some
> rebuilding. I
>
> > have the wood ribs
>
> >
>
> >
>
> >
>
> > already built for the cs. I was going to do a engine
>
> > tear-down and see what
>
> >
>
> >
>
> >
>
> > it needs. Probable needs new rings...at least a top
>
> > overhaul and a good
>
> >
>
> >
>
> >
>
> > cleaning & inspection. It came with a electric
> prop,
>
> > but I would have gone
>
> >
>
> >
>
> >
>
> > back to a wood prop.The canopy is apart for cleaning,
>
> > painting and glass
>
> >
>
> >
>
> >
>
> > replacement where needed. It has metal flaps and
>
> > floorboards, but no heater
>
> >
>
> >
>
> >
>
> > installation. This could be added for cold climes.I
> am
>
> > asking $10,000.00 but
>
> >
>
> >
>
> >
>
> > would allow $1,000.00 for transportation. You probably
> have
>
> > a good idea of
>
> >
>
> >
>
> >
>
> > the size trailer and truck needed for transport. I
> believe
>
> > I have most all
>
> >
>
> >
>
> >
>
> > the logs/paperwork. I wish the situation had been
> different
>
> > so my friend and
>
> >
>
> >
>
> >
>
> > I could
>
> >
>
> >
>
> >
>
> > have had "twin" PT's to fly.
>
> >
>
> >
>
> >
>
> > Bob Dunn 936-564-7212 C-936-569-3287
>
> >
>
> >
>
> >
>
> > --- On Wed, 10/6/10, stinsonman2000
> ; >
>
> > wrote:
>
> >
>
> >
>
> >
>
> > From: stinsonman2000
> ; >
>
> >
>
> >
>
> >
>
> > Subject: [fairchildclub] Looking for a PT19 or 26
>
> > project.
>
> >
>
> >
>
> >
>
> > To: fairchildclub@yahoogroups.com
>
> ;
>
> >
>
> >
>
> >
>
> > Date: Wednesday, October 6, 2010, 7:38 PM
>
> >
>
> >
>
> >
>
> > Looking for a PT19 or 26 project. Prefer a complete
> plane
>
> > but will
>
> >
>
> >
>
> >
>
> > consider what ever is available. I live in Pa. but am
>
> > willing to travel for
>
> >
>
> >
>
> >
>
> > a good one.
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> > ------------------------------------
>
> >
>
> >
>
> >
>
> > Yahoo! Groups Links
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/
>
> >
>
> >
>
> >
>
> > Individual Email | Traditional
>
> >
>
> >
>
> >
>
> > http://groups.yahoo.com/group/fairchildclub/join
>
> >
>
> >
>
> >
>
> > (Yahoo! ID required)
>
> >
>
> >
>
> >
>
> > fairchildclub-digest@yahoogroups.com
>
> ;
>
> >
>
> >
>
> >
>
> >
>
> > fairchildclub-fullfeatured@yahoogroups.com
>
> ;
>
>
> >
>
> >
>
> >
>
> > fairchildclub-unsubscribe@yahoogroups.com
>
> ;
>
>
> >
>
> >
>
> >
>
> > http://docs.yahoo.com/info/terms/
>
> >
>
> >
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
> >
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

----------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3220 - Release Date: 10/26/10 06:34:00

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

'

Fairchild Club Forum