Re: Pitot

[Stuart Burgess]

'Hi guys



Does anyone know where I can source a replacement pitot for my F24R project?
Mine was broken off at the leading edge of the wing. I could rebuild it, as
the actual pitot section is intact, but if I can get an original
replacement, that would be first prize.



Many thanks



Stuart

Cape Town, South Africa



[Non-text portions of this message have been removed]'

[james chybicki]

'Hi Stuart
IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
I will keep you posted, if I find anything, please do the same with me.
thanks
Jim C.
UC-61K 43-14964 / HB-690

--- On Mon, 9/20/10, Stuart Burgess wrote:


From: Stuart Burgess
Subject: [fairchildclub] Pitot
To: fairchildclub@yahoogroups.com
Date: Monday, September 20, 2010, 3:01 AM


 



Hi guys

Does anyone know where I can source a replacement pitot for my F24R project?
Mine was broken off at the leading edge of the wing. I could rebuild it, as
the actual pitot section is intact, but if I can get an original
replacement, that would be first prize.

Many thanks

Stuart

Cape Town, South Africa

[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]

'

[wackett129]

'G'day Jim and Stuart,
Have been looking through my stocks to see what I had with no luck.Jim, I first thought that you were looking for the stepped type as used on P-40 etc which I have but then checked the Fairchild parts book to see that It was quite different. Have never seen one here in Australia,no Argus IIIs the Argus II here has a straight one in the same position and on the Argus I it is a small one mounted at the strut attachment position. By the way Jim can you email me on antair at optusnet.com.au regarding the air maze please.
John Gallagher

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi Stuart
> IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
> I will keep you posted, if I find anything, please do the same with me.
> thanks
> Jim C.
> UC-61K 43-14964 / HB-690
>
> --- On Mon, 9/20/10, Stuart Burgess wrote:
>
>
> From: Stuart Burgess
> Subject: [fairchildclub] Pitot
> To: fairchildclub@yahoogroups.com
> Date: Monday, September 20, 2010, 3:01 AM
>
>
>  
>
>
>
> Hi guys
>
> Does anyone know where I can source a replacement pitot for my F24R project?
> Mine was broken off at the leading edge of the wing. I could rebuild it, as
> the actual pitot section is intact, but if I can get an original
> replacement, that would be first prize.
>
> Many thanks
>
> Stuart
>
> Cape Town, South Africa
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

[Stuart Burgess]

'Hi Jim

Indeed it is. I guess I may have to remake it.

Good luck with your search and if you find two, you know where to reach me

Regards

Stuart

-----Original Message-----
From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com] On Behalf Of james chybicki
Sent: 20 September 2010 06:31 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Pitot

Hi Stuart
IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
I will keep you posted, if I find anything, please do the same with me.
thanks
Jim C.
UC-61K 43-14964 / HB-690

--- On Mon, 9/20/10, Stuart Burgess wrote:


From: Stuart Burgess
Subject: [fairchildclub] Pitot
To: fairchildclub@yahoogroups.com
Date: Monday, September 20, 2010, 3:01 AM






Hi guys

Does anyone know where I can source a replacement pitot for my F24R project?
Mine was broken off at the leading edge of the wing. I could rebuild it, as
the actual pitot section is intact, but if I can get an original
replacement, that would be first prize.

Many thanks

Stuart

Cape Town, South Africa

[Non-text portions of this message have been removed]











[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

'

[james chybicki]

'Hi John
I have tired the optusnet.com.au  way and I still got the mail bounced back.
please email me at my work email
jim@jetxaerospace.com
I deal with airplane parts people all over the world, so this should work
thanks/cheers
Jim C

--- On Mon, 9/20/10, wackett129 wrote:


From: wackett129
Subject: [fairchildclub] Re: Pitot
To: fairchildclub@yahoogroups.com
Date: Monday, September 20, 2010, 4:24 PM


 



G'day Jim and Stuart,
Have been looking through my stocks to see what I had with no luck.Jim, I first thought that you were looking for the stepped type as used on P-40 etc which I have but then checked the Fairchild parts book to see that It was quite different. Have never seen one here in Australia,no Argus IIIs the Argus II here has a straight one in the same position and on the Argus I it is a small one mounted at the strut attachment position. By the way Jim can you email me on antair at optusnet.com.au regarding the air maze please.
John Gallagher

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi Stuart
> IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
> I will keep you posted, if I find anything, please do the same with me.
> thanks
> Jim C.
> UC-61K 43-14964 / HB-690
>
> --- On Mon, 9/20/10, Stuart Burgess wrote:
>
>
> From: Stuart Burgess
> Subject: [fairchildclub] Pitot
> To: fairchildclub@yahoogroups.com
> Date: Monday, September 20, 2010, 3:01 AM
>
>
>  
>
>
>
> Hi guys
>
> Does anyone know where I can source a replacement pitot for my F24R project?
> Mine was broken off at the leading edge of the wing. I could rebuild it, as
> the actual pitot section is intact, but if I can get an original
> replacement, that would be first prize.
>
> Many thanks
>
> Stuart
>
> Cape Town, South Africa
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>











[Non-text portions of this message have been removed]

'

[wackett129]

'G'day Jim,
We are not having much luck here, I must be a bit dumb but I don't know what the rest of your email address is. Is it j--@yahoo.com ? or something else? I don't even know what country you are in. In the message below you have put A at the end of my email address which it does not have and may be the reason it is bouncing, it is antair at optusnet.com.au with no spaces if that helps.
regards
John Gallagher

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi John
> I have tired the optusnet.com.au  way and I still got the mail bounced back.
> please email me at my work email
> jim@...
> I deal with airplane parts people all over the world, so this should work
> thanks/cheers
> Jim C
>
> --- On Mon, 9/20/10, wackett129 wrote:
>
>
> From: wackett129
> Subject: [fairchildclub] Re: Pitot
> To: fairchildclub@yahoogroups.com
> Date: Monday, September 20, 2010, 4:24 PM
>
>
>  
>
>
>
> G'day Jim and Stuart,
> Have been looking through my stocks to see what I had with no luck.Jim, I first thought that you were looking for the stepped type as used on P-40 etc which I have but then checked the Fairchild parts book to see that It was quite different. Have never seen one here in Australia,no Argus IIIs the Argus II here has a straight one in the same position and on the Argus I it is a small one mounted at the strut attachment position. By the way Jim can you email me on antair at optusnet.com.au regarding the air maze please.
> John Gallagher
>
> --- In fairchildclub@yahoogroups.com, james chybicki wrote:
> >
> > Hi Stuart
> > IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
> > I will keep you posted, if I find anything, please do the same with me.
> > thanks
> > Jim C.
> > UC-61K 43-14964 / HB-690
> >
> > --- On Mon, 9/20/10, Stuart Burgess wrote:
> >
> >
> > From: Stuart Burgess
> > Subject: [fairchildclub] Pitot
> > To: fairchildclub@yahoogroups.com
> > Date: Monday, September 20, 2010, 3:01 AM
> >
> >
> > � 
> >
> >
> >
> > Hi guys
> >
> > Does anyone know where I can source a replacement pitot for my F24R project?
> > Mine was broken off at the leading edge of the wing. I could rebuild it, as
> > the actual pitot section is intact, but if I can get an original
> > replacement, that would be first prize.
> >
> > Many thanks
> >
> > Stuart
> >
> > Cape Town, South Africa
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

[james chybicki]

'Hi John
lets try this.
i think the web site knocks out email addresses so it will spell it out
jim(at sign)jetxaerospace(dot)com I am in Chicago USA

--- On Wed, 9/22/10, wackett129 wrote:


From: wackett129
Subject: [fairchildclub] Re: Pitot
To: fairchildclub@yahoogroups.com
Date: Wednesday, September 22, 2010, 4:49 PM


 



G'day Jim,
We are not having much luck here, I must be a bit dumb but I don't know what the rest of your email address is. Is it j--@yahoo.com ? or something else? I don't even know what country you are in. In the message below you have put A at the end of my email address which it does not have and may be the reason it is bouncing, it is antair at optusnet.com.au with no spaces if that helps.
regards
John Gallagher

--- In fairchildclub@yahoogroups.com, james chybicki wrote:
>
> Hi John
> I have tired the optusnet.com.au  way and I still got the mail bounced back.
> please email me at my work email
> jim@...
> I deal with airplane parts people all over the world, so this should work
> thanks/cheers
> Jim C
>
> --- On Mon, 9/20/10, wackett129 wrote:
>
>
> From: wackett129
> Subject: [fairchildclub] Re: Pitot
> To: fairchildclub@yahoogroups.com
> Date: Monday, September 20, 2010, 4:24 PM
>
>
>  
>
>
>
> G'day Jim and Stuart,
> Have been looking through my stocks to see what I had with no luck.Jim, I first thought that you were looking for the stepped type as used on P-40 etc which I have but then checked the Fairchild parts book to see that It was quite different. Have never seen one here in Australia,no Argus IIIs the Argus II here has a straight one in the same position and on the Argus I it is a small one mounted at the strut attachment position. By the way Jim can you email me on antair at optusnet.com.au regarding the air maze please.
> John Gallagher
>
> --- In fairchildclub@yahoogroups.com, james chybicki wrote:
> >
> > Hi Stuart
> > IF your Pitot is from your UC-61, that may be an issue. I have been looking for the same Pitot (Kollsman Type 765 for about 2 years without luck.
> > I will keep you posted, if I find anything, please do the same with me.
> > thanks
> > Jim C.
> > UC-61K 43-14964 / HB-690
> >
> > --- On Mon, 9/20/10, Stuart Burgess wrote:
> >
> >
> > From: Stuart Burgess
> > Subject: [fairchildclub] Pitot
> > To: fairchildclub@yahoogroups.com
> > Date: Monday, September 20, 2010, 3:01 AM
> >
> >
> >  
> >
> >
> >
> > Hi guys
> >
> > Does anyone know where I can source a replacement pitot for my F24R project?
> > Mine was broken off at the leading edge of the wing. I could rebuild it, as
> > the actual pitot section is intact, but if I can get an original
> > replacement, that would be first prize.
> >
> > Many thanks
> >
> > Stuart
> >
> > Cape Town, South Africa
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>











[Non-text portions of this message have been removed]

'