'I was interviewed my Mike Blakney from AVWeb the other day about my
restoration project and he put our interview up on AVWeb. It is an
audio interview that you can listen to. Enjoy:
http://www.avweb.com/podcast/podcast/AudioPodcast_BradleyBormuth_Fairchi\
ld24Recovery_197888-1.html
[Non-text portions of this message have been removed]'
Re: a locking mechanism to the tailwheel of Fairchild-24
-
- Posts: 14
- Joined: Mon Apr 03, 2006 8:02 pm
-
- Posts: 12
- Joined: Sat Feb 04, 2006 9:08 am
a locking mechanism to the tailwheel of Fairchild-24
'Dear Group:
I was advised that Mr. George Olson , had developed and used
successfully a locking mechanism to the tailwheel of his Fairchild-24G. The
wheel lock operated from the cockpit. He designed it years ago and
installed and had signed off. No original part of the airplane is changed,
so it can be removed and go back to original.
I am wondering if anybody has a contact information for Mr. George Olson ,
or a copy of this design of the locking mechanism,
or a locking mechanism itself for sale?
Best,
Vlad
NC336E
[Non-text portions of this message have been removed]'
I was advised that Mr. George Olson , had developed and used
successfully a locking mechanism to the tailwheel of his Fairchild-24G. The
wheel lock operated from the cockpit. He designed it years ago and
installed and had signed off. No original part of the airplane is changed,
so it can be removed and go back to original.
I am wondering if anybody has a contact information for Mr. George Olson ,
or a copy of this design of the locking mechanism,
or a locking mechanism itself for sale?
Best,
Vlad
NC336E
[Non-text portions of this message have been removed]'
Re: a locking mechanism to the tailwheel of Fairchild-24
'Hi Vlad,
I ransacked my office today and located a copy of George's locking
mechanism 337. I will scan the documents and transfer a .pdf copy to
the group files section today.
In the process of searching I came across a Fairchild Flyer page I
had saved that indicated that the club (John Berendt) also has this
337 in its files.
Jamie Treat, have you discussed with John possibly scanning the club
stash of 337s?
In my search I also came across correspondence that validates the
installation of 30 gallon wing tanks in a 24G model; I will try to
scan that stuff also and move it to the files section.
Dan Casali
I ransacked my office today and located a copy of George's locking
mechanism 337. I will scan the documents and transfer a .pdf copy to
the group files section today.
In the process of searching I came across a Fairchild Flyer page I
had saved that indicated that the club (John Berendt) also has this
337 in its files.
Jamie Treat, have you discussed with John possibly scanning the club
stash of 337s?
In my search I also came across correspondence that validates the
installation of 30 gallon wing tanks in a 24G model; I will try to
scan that stuff also and move it to the files section.
Dan Casali
'On May 20, 2008, at 8:00 AM, vsamuilov@notes.cc.sunysb.edu wrote:
>
> Dear Group:
> I was advised that Mr. George Olson , had developed and used
> successfully a locking mechanism to the tailwheel of his
> Fairchild-24G. The
> wheel lock operated from the cockpit. He designed it years ago and
> installed and had signed off. No original part of the airplane is
> changed,
> so it can be removed and go back to original.
>
> I am wondering if anybody has a contact information for Mr. George
> Olson ,
> or a copy of this design of the locking mechanism,
> or a locking mechanism itself for sale?
> Best,
> Vlad
> NC336E
>
> [Non-text portions of this message have been removed]
>
>
>
Dan Casali
MacWizard
Box 1286 Ketchum, ID 83340
208.726.5120
[Non-text portions of this message have been removed]
-
- Posts: 12
- Joined: Sat Feb 04, 2006 9:08 am
Re: a locking mechanism to the tailwheel of Fairchild-24
'Hi, Dan:
Looking forward to it!
Thank you.
Vlad
Dan Casali
Sent by: fairchildclub@yahoogroups.com
05/22/2008 01:34 PM
Please respond to
fairchildclub@yahoogroups.com
To
fairchildclub@yahoogroups.com
cc
Subject
Re: [fairchildclub] a locking mechanism to the tailwheel of Fairchild-24
Hi Vlad,
I ransacked my office today and located a copy of George's locking
mechanism 337. I will scan the documents and transfer a .pdf copy to
the group files section today.
In the process of searching I came across a Fairchild Flyer page I
had saved that indicated that the club (John Berendt) also has this
337 in its files.
Jamie Treat, have you discussed with John possibly scanning the club
stash of 337s?
In my search I also came across correspondence that validates the
installation of 30 gallon wing tanks in a 24G model; I will try to
scan that stuff also and move it to the files section.
Dan Casali
Looking forward to it!
Thank you.
Vlad
Dan Casali
Sent by: fairchildclub@yahoogroups.com
05/22/2008 01:34 PM
Please respond to
fairchildclub@yahoogroups.com
To
fairchildclub@yahoogroups.com
cc
Subject
Re: [fairchildclub] a locking mechanism to the tailwheel of Fairchild-24
Hi Vlad,
I ransacked my office today and located a copy of George's locking
mechanism 337. I will scan the documents and transfer a .pdf copy to
the group files section today.
In the process of searching I came across a Fairchild Flyer page I
had saved that indicated that the club (John Berendt) also has this
337 in its files.
Jamie Treat, have you discussed with John possibly scanning the club
stash of 337s?
In my search I also came across correspondence that validates the
installation of 30 gallon wing tanks in a 24G model; I will try to
scan that stuff also and move it to the files section.
Dan Casali
'On May 20, 2008, at 8:00 AM, vsamuilov@notes.cc.sunysb.edu wrote:
>
> Dear Group:
> I was advised that Mr. George Olson , had developed and used
> successfully a locking mechanism to the tailwheel of his
> Fairchild-24G. The
> wheel lock operated from the cockpit. He designed it years ago and
> installed and had signed off. No original part of the airplane is
> changed,
> so it can be removed and go back to original.
>
> I am wondering if anybody has a contact information for Mr. George
> Olson ,
> or a copy of this design of the locking mechanism,
> or a locking mechanism itself for sale?
> Best,
> Vlad
> NC336E
>
> [Non-text portions of this message have been removed]
>
>
>
Dan Casali
MacWizard
Box 1286 Ketchum, ID 83340
208.726.5120
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]