Re: Fairchild 24R Blueprints

jwm1801 · Post by **jwm1801** » Fri Mar 07, 2008 6:15 am

'Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.'

WILLIAM MORGAN · Post by **WILLIAM MORGAN** » Fri Mar 07, 2008 6:45 am

'Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints on CD also !
Thanks, Bill Morgan

jwm1801 wrote: Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.

[Non-text portions of this message have been removed]'

obliquephoto · Post by **obliquephoto** » Fri Mar 07, 2008 6:49 am

'Let me know if you have any luck with the CD Bill. Have you replaced your
stringers or where they OK? JON

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of WILLIAM MORGAN
Sent: Friday, March 07, 2008 7:45 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairchild 24R Blueprints

Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints
on CD also !
Thanks, Bill Morgan

jwm1801
wrote: Good morning. I was wondering if anyone had a copy of the Fairchild
24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

WILLIAM MORGAN · Post by **WILLIAM MORGAN** » Fri Mar 07, 2008 8:14 am

'I will let you know on the CD. My stringers were good. We're flying her now ! It is a blast.
Bill Morgan

obliquephoto wrote: Let me know if you have any luck with the CD Bill. Have you replaced your
stringers or where they OK? JON

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of WILLIAM MORGAN
Sent: Friday, March 07, 2008 7:45 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairchild 24R Blueprints

Hi,
As an owner/restores of a Faorchild 24R, I Really could use the blueprints
on CD also !
Thanks, Bill Morgan

jwm1801
wrote: Good morning. I was wondering if anyone had a copy of the Fairchild
24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]'

Jamie Treat · Post by **Jamie Treat** » Fri Mar 07, 2008 8:20 pm

'Jon,

I will send more this week to the Club. Get back with John next week.

Jamie

Jamie S. Treat
Aircraft Restoration & Repair
IAC 5, Chapter President
Kelly Airpark (CO15)
24201 David C. Johnson Loop
Elbert, CO 80106

New Email: JamieTreat@q.com
Hm/Hgr 303-648-0130
Cell 303-304-7937

Quote of the Month: If helicopters are so safe, how come there are no vintage/classic
helicopter fly-ins? - Anonymous

----- Original Message -----
From: jwm1801
To: fairchildclub@yahoogroups.com
Sent: Friday, March 07, 2008 5:15 AM
Subject: [fairchildclub] Fairchild 24R Blueprints

Good morning. I was wondering if anyone had a copy of the Fairchild 24
blueprints on CD. I spoke with John Berendt and he said he was all out
at this time. I could REALLY use one for my restoration. Please let
me know. THANKS JON MARTIN.

[Non-text portions of this message have been removed]

'