Re: preoiler

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
belvasandro
Posts: 14
Joined: Tue Mar 28, 2006 2:27 am

preoiler

Post by belvasandro »

'Hello,
in the next months I'll mount the engine on a/c, someone has mounted a
preoiler on the WARNER 165hp? If yes, I would know the source between
the oil tank and the engine, the place to pump oil into the engine.
Photos or sketch help.
Thanks
Sandro Pagliarin
UC-61A 43-14452
ITALY'
Bob Etter
Posts: 48
Joined: Fri Sep 07, 2007 9:01 pm

Re: preoiler

Post by Bob Etter »

'I don't have what you are looking for, but I found something that may be of interest to you and or someone else with a UC-61.

I was taking apart an old F-24 door (my original left side door) and found original UC-61 upholstery (very used) was still in place. The upholstery matched the fabric that I uncovered on one of the rear arm rests.

If you would like a photo of the old panel, send me E-mail address. The same goes for anyone else that would want it.

Bob
rletter@citlink.net
----- Original Message -----
From: belvasandro
To: fairchildclub@yahoogroups.com
Sent: Friday, January 25, 2008 12:36 AM
Subject: [fairchildclub] preoiler


Hello,
in the next months I'll mount the engine on a/c, someone has mounted a
preoiler on the WARNER 165hp? If yes, I would know the source between
the oil tank and the engine, the place to pump oil into the engine.
Photos or sketch help.
Thanks
Sandro Pagliarin
UC-61A 43-14452
ITALY





[Non-text portions of this message have been removed]
'
Post Reply