Re: Lord mounts for Ranger 440

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
michaelmps
Posts: 8
Joined: Tue Jan 15, 2008 1:23 am

Lord mounts for Ranger 440

Post by michaelmps »

'I need a part # or info on where I can obtain motor mounts for a PT-
19 with the Ranger 440. Lord is being difficult because I dont have a
part # and there is no part # on the ones I have, just the patten #.

Can any body help? Michael'
Top
jameslbryan@btopenworld.com
Posts: 40
Joined: Tue Apr 26, 2005 3:20 am

Re: Lord mounts for Ranger 440

Post by jameslbryan@btopenworld.com »

'This should help chap,
James

----- Original Message ----
From: michaelmps
To: fairchildclub@yahoogroups.com
Sent: Tuesday, 15 January, 2008 7:23:29 AM
Subject: [fairchildclub] Lord mounts for Ranger 440













I need a part # or info on where I can obtain motor mounts for a PT-

19 with the Ranger 440. Lord is being difficult because I dont have a

part # and there is no part # on the ones I have, just the patten #.



Can any body help? Michael






























[Non-text portions of this message have been removed]'
Top
michaelmps
Posts: 8
Joined: Tue Jan 15, 2008 1:23 am

Re: Lord mounts for Ranger 440

Post by michaelmps »

'James, Your message was scrambled and nothing came across. Please
resend. Thanks..


-- In fairchildclub@yahoogroups.com, wrote:
>
>
> This should help chap,
> James
>
> ----- Original Message ----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, 15 January, 2008 7:23:29 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
>
>
>
>
>
>
>
>
>
>
>
> I need a part # or info on where I can obtain motor
mounts for a PT-
>
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
>
> part # and there is no part # on the ones I have, just the patten
#.
>
>
>
> Can any body help? Michael
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
Kevin Trumpore
Posts: 16
Joined: Wed Dec 24, 2003 3:47 pm

Re: Lord mounts for Ranger 440

Post by Kevin Trumpore »

'Michael,

Southland Mfg. Co. located in Hope, NJ remanufactures the Lord style motor mounts for several aircraft. We have the tooling for the Fairchild 24R with the Ranger. You can contact us at our office # 908 459 5858, or fax us at 908 459 5058. You can also contact us at our e-mail ketrumpore@yahoo.com.

We are not sure if the Lord mount is the same for your airplane, but if not we will be happy to work with you. We may be able to use the tooling from one of the many other mounts that we make.

Regards
Kevin Trumpore


michaelmps wrote:
James, Your message was scrambled and nothing came across. Please
resend. Thanks..

-- In fairchildclub@yahoogroups.com, wrote:
>
>
> This should help chap,
> James
>
> ----- Original Message ----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, 15 January, 2008 7:23:29 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
>
>
>
>
>
>
>
>
>
>
>
> I need a part # or info on where I can obtain motor
mounts for a PT-
>
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
>
> part # and there is no part # on the ones I have, just the patten
#.
>
>
>
> Can any body help? Michael
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]'
Top
Jamie Treat
Posts: 223
Joined: Mon Jan 27, 2003 7:14 pm

Re: Lord mounts for Ranger 440

Post by Jamie Treat »

'Michael,

Lord Manuf will not help you at all, they have no stock and will not make any. I have chased that rabbit years ago. Not interested in us small guys.

If you want mounts, you have two sources.

NEW/OLD stock: Fresno Airparts: (Ranger Lord Mounts, Hayes Brake Parts, Mag Parts)

Chandler Field, 520 West Kearney, Fresno, CA 93706
Phone: 559-237-4863, Fax: 559-237-2703

Website: http://www.fresnoairparts.com

or

NEW Manuf: Ranger and Warner 145/165/185 Engine Bushings: Southland Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350 Hope, NJ. 07844 Phone 908-459-5858 Cell: 201-919-4287


Jamie S. Treat
Aircraft Restoration & Repair
IAC 5, Chapter President
Kelly Airpark (CO15)
24201 David C. Johnson Loop
Elbert, CO 80106

Hm/Hgr 303-648-0130

Quote of the Month: If helicopters are so safe, how come there are no vintage/classic
helicopter fly-ins? - Anonymous


----- Original Message -----
From: michaelmps
To: fairchildclub@yahoogroups.com
Sent: Tuesday, January 15, 2008 12:23 AM
Subject: [fairchildclub] Lord mounts for Ranger 440


I need a part # or info on where I can obtain motor mounts for a PT-
19 with the Ranger 440. Lord is being difficult because I dont have a
part # and there is no part # on the ones I have, just the patten #.

Can any body help? Michael





[Non-text portions of this message have been removed]
'
Top
cagog
Posts: 27
Joined: Mon Apr 28, 2003 8:15 am

Re: Lord mounts for Ranger 440

Post by cagog »

'-
What does a new set cost?



-- In fairchildclub@yahoogroups.com, "Jamie Treat"
wrote:
>
> Michael,
>
> Lord Manuf will not help you at all, they have no stock and will
not make any. I have chased that rabbit years ago. Not interested in
us small guys.
>
> If you want mounts, you have two sources.
>
> NEW/OLD stock: Fresno Airparts: (Ranger Lord Mounts, Hayes Brake
Parts, Mag Parts)
>
> Chandler Field, 520 West Kearney, Fresno, CA 93706
> Phone: 559-237-4863, Fax: 559-237-2703
>
> Website: http://www.fresnoairparts.com
>
> or
>
> NEW Manuf: Ranger and Warner 145/165/185 Engine Bushings: Southland
Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350 Hope, NJ.
07844 Phone 908-459-5858 Cell: 201-919-4287
>
>
> Jamie S. Treat
> Aircraft Restoration & Repair
> IAC 5, Chapter President
> Kelly Airpark (CO15)
> 24201 David C. Johnson Loop
> Elbert, CO 80106
>
> Hm/Hgr 303-648-0130
>
> Quote of the Month: If helicopters are so safe, how come there are
no vintage/classic
> helicopter fly-ins? - Anonymous
>
>
>
> ----- Original Message -----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, January 15, 2008 12:23 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
> I need a part # or info on where I can obtain motor mounts for a
PT-
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
> part # and there is no part # on the ones I have, just the patten
#.
>
> Can any body help? Michael
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
'
Top
michael Steiger
Posts: 5
Joined: Thu Jan 17, 2008 9:47 pm

Re: Lord mounts for Ranger 440

Post by michael Steiger »

'Thanks. They are 80$.....You guys helped big time!!

cagog wrote: -
What does a new set cost?

-- In fairchildclub@yahoogroups.com, "Jamie Treat"
wrote:
>
> Michael,
>
> Lord Manuf will not help you at all, they have no stock and will
not make any. I have chased that rabbit years ago. Not interested in
us small guys.
>
> If you want mounts, you have two sources.
>
> NEW/OLD stock: Fresno Airparts: (Ranger Lord Mounts, Hayes Brake
Parts, Mag Parts)
>
> Chandler Field, 520 West Kearney, Fresno, CA 93706
> Phone: 559-237-4863, Fax: 559-237-2703
>
> Website: http://www.fresnoairparts.com
>
> or
>
> NEW Manuf: Ranger and Warner 145/165/185 Engine Bushings: Southland
Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350 Hope, NJ.
07844 Phone 908-459-5858 Cell: 201-919-4287
>
>
> Jamie S. Treat
> Aircraft Restoration & Repair
> IAC 5, Chapter President
> Kelly Airpark (CO15)
> 24201 David C. Johnson Loop
> Elbert, CO 80106
>
> Hm/Hgr 303-648-0130
>
> Quote of the Month: If helicopters are so safe, how come there are
no vintage/classic
> helicopter fly-ins? - Anonymous
>
>
>
> ----- Original Message -----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, January 15, 2008 12:23 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
> I need a part # or info on where I can obtain motor mounts for a
PT-
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
> part # and there is no part # on the ones I have, just the patten
#.
>
> Can any body help? Michael
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





---------------------------------
Never miss a thing. Make Yahoo your homepage.

[Non-text portions of this message have been removed]'
Top
michael Steiger
Posts: 5
Joined: Thu Jan 17, 2008 9:47 pm

Re: Lord mounts for Ranger 440

Post by michael Steiger »

'Thanks. They are 80$.....You guys helped big time!!

cagog wrote: -
What does a new set cost?

-- In fairchildclub@yahoogroups.com, "Jamie Treat"
wrote:
>
> Michael,
>
> Lord Manuf will not help you at all, they have no stock and will
not make any. I have chased that rabbit years ago. Not interested in
us small guys.
>
> If you want mounts, you have two sources.
>
> NEW/OLD stock: Fresno Airparts: (Ranger Lord Mounts, Hayes Brake
Parts, Mag Parts)
>
> Chandler Field, 520 West Kearney, Fresno, CA 93706
> Phone: 559-237-4863, Fax: 559-237-2703
>
> Website: http://www.fresnoairparts.com
>
> or
>
> NEW Manuf: Ranger and Warner 145/165/185 Engine Bushings: Southland
Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350 Hope, NJ.
07844 Phone 908-459-5858 Cell: 201-919-4287
>
>
> Jamie S. Treat
> Aircraft Restoration & Repair
> IAC 5, Chapter President
> Kelly Airpark (CO15)
> 24201 David C. Johnson Loop
> Elbert, CO 80106
>
> Hm/Hgr 303-648-0130
>
> Quote of the Month: If helicopters are so safe, how come there are
no vintage/classic
> helicopter fly-ins? - Anonymous
>
>
>
> ----- Original Message -----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, January 15, 2008 12:23 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
> I need a part # or info on where I can obtain motor mounts for a
PT-
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
> part # and there is no part # on the ones I have, just the patten
#.
>
> Can any body help? Michael
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[Non-text portions of this message have been removed]'
Top
Seifert
Posts: 85
Joined: Tue May 12, 2020 1:33 pm
Location: Yucaipa,CA

Re: Lord mounts for Ranger 440

Post by Seifert »

'Michael
Which supplier quoted $80 and is that each, or a set of four? I understand the Fresno parts are NOS and the Southland parts are NEW. Can anyone elaborate?
----- Original Message -----
From: michael Steiger
To: fairchildclub@yahoogroups.com
Sent: Thursday, January 17, 2008 7:47 PM
Subject: Re: [fairchildclub] Re: Lord mounts for Ranger 440


Thanks. They are 80$.....You guys helped big time!!

cagog wrote: -
What does a new set cost?

-- In fairchildclub@yahoogroups.com, "Jamie Treat"
wrote:
>
> Michael,
>
> Lord Manuf will not help you at all, they have no stock and will
not make any. I have chased that rabbit years ago. Not interested in
us small guys.
>
> If you want mounts, you have two sources.
>
> NEW/OLD stock: Fresno Airparts: (Ranger Lord Mounts, Hayes Brake
Parts, Mag Parts)
>
> Chandler Field, 520 West Kearney, Fresno, CA 93706
> Phone: 559-237-4863, Fax: 559-237-2703
>
> Website: http://www.fresnoairparts.com
>
> or
>
> NEW Manuf: Ranger and Warner 145/165/185 Engine Bushings: Southland
Manufacturing Corp. Owner: Larry Trumpore P.O. Box 350 Hope, NJ.
07844 Phone 908-459-5858 Cell: 201-919-4287
>
>
> Jamie S. Treat
> Aircraft Restoration & Repair
> IAC 5, Chapter President
> Kelly Airpark (CO15)
> 24201 David C. Johnson Loop
> Elbert, CO 80106
>
> Hm/Hgr 303-648-0130
>
> Quote of the Month: If helicopters are so safe, how come there are
no vintage/classic
> helicopter fly-ins? - Anonymous
>
>
>
> ----- Original Message -----
> From: michaelmps
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, January 15, 2008 12:23 AM
> Subject: [fairchildclub] Lord mounts for Ranger 440
>
>
> I need a part # or info on where I can obtain motor mounts for a
PT-
> 19 with the Ranger 440. Lord is being difficult because I dont
have a
> part # and there is no part # on the ones I have, just the patten
#.
>
> Can any body help? Michael
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
'
Restoring an 1937 F24H model Fairchild
Top
Post Reply

Return to “Yahoo Group Archives”