Re: In search of....

[OldOOwl@aol.com]

'I seem to remember someone looking for bearings for the flight controls on a
Fairchild F24G. I lost the post somewhere in my archives. My F24G is a
1937...there might be a difference in the bearings I seek.
I am now needof the 9 bearings for the tail surfaces...elevators,
rudder...and trim tabs. Kaman has not been able to provide these bearings. the
dimensions are:
O.D. .6835
I.D. .250
ODW .255
IDW .500

Does anyone know where I might find bearings such as these?? There are no
numbers on them.

Thanks in advance!! See you at OSH!
Richard Hawley
303-838-4670
cell 303-263-7750
24878 Richmond Hill rd.
Conifer, C 80433
_oldoowl@aol.com_ (mailto:oldoowl@aol.com)




************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour


[Non-text portions of this message have been removed]'

[Pilot4906@aol.com]

'Are there part numbers in the parts book?

Gene Haines



************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour


[Non-text portions of this message have been removed]'

[Buell Powell]

'Richard,
I bought new bearings for my 46 F24 from Univar. I haven't
measured them but if you call I'm sure they can give you the dimensions.
They are Schatz bearings-part no. CS3906. If Univar no longer has them
they are located in Poughkeepsie NY.
Buell Powell

OldOOwl@aol.com wrote:

>
> I seem to remember someone looking for bearings for the flight
> controls on a
> Fairchild F24G. I lost the post somewhere in my archives. My F24G is a
> 1937...there might be a difference in the bearings I seek.
> I am now needof the 9 bearings for the tail surfaces...elevator s,
> rudder...and trim tabs. Kaman has not been able to provide these
> bearings. the
> dimensions are:
> O.D. .6835
> I.D. .250
> ODW .255
> IDW .500
>
> Does anyone know where I might find bearings such as these?? There are no
> numbers on them.
>
> Thanks in advance!! See you at OSH!
> Richard Hawley
> 303-838-4670
> cell 303-263-7750
> 24878 Richmond Hill rd.
> Conifer, C 80433
> _oldoowl@aol. com _ (mailto:oldoowl@aol.
> com )
>
>
> ************ ********* ********* ******** Get a sneak peek of the
> all-new AOL at
> http://discover. aol.com/memed/ aolcom30tour
>
>
> [Non-text portions of this message have been removed]
>
>

'

[OldOOwl@aol.com]

'Thanks Buell...
I think these bearings are smaller than the CS3906...but Univair is right
here in town so I'll run out there and see what they have. Kaman has been no
help and I haven't found any numbers yet.
Richard Hawley



************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour


[Non-text portions of this message have been removed]'