Re: Restoration advice & Tail wheel install

Karl Saenger · Post by **Karl Saenger** » Wed Dec 20, 2006 1:25 pm

'Ashley,

I will send an e-mail with attachements to you shortly.

Karl

--- In fairchildclub@yahoogroups.com, "Ashley Messenger"
wrote:

>
> Karl
>
> We would be thrilled with any pictures you could provide for us! Do

you know how the fuselage tubing was painted? We believe that the
frame is zinc chromate, but are unsure what was applied to the visible
structure in the cockpit.

>
> Thanks again!
>
> Ashley and Peggy
>
> [Non-text portions of this message have been removed]
>

'

Melvyn Hiscock · Post by **Melvyn Hiscock** » Thu Dec 21, 2006 4:31 pm

'There are some members over here, not all of us have Fairchilds though.

My Rearwin Cloudster is based at Popham, about 40 minutes SW of
London. A nice grass field with some good airplanes.

You are welcome to come over and talk old aeroplanes.

Let me know when you are coming.

Melvyn Hiscock'

james chybicki · Post by **james chybicki** » Tue Dec 26, 2006 3:09 pm

'Hi Karl-
Can you please copy me also on the interior pictures
Thanks!
Jim Chybicki
UC-61K
rampratone@yahoo.com
p.s. We still have the full swivel tailwheel, can you
please explain the mounting procedure to the lower
portion of the frame. Our tailwheel strut assembly
only has a thin "L" shape bracket that lines up with a
hole on the frame, but it does not look strong enought
to support tail wheel landings. Since teh full swivel
was a RAF Modification the USAAF Manuals do not show
how to install these particular tailwheels.
any assistance will be greatly appreciated
Keep 'Em Flying

--- Karl Saenger wrote:

>
> Ashley,
>
> I will send an e-mail with attachements to you
> shortly.
>
> Karl
>
>
> --- In fairchildclub@yahoogroups.com, "Ashley
> Messenger"
> wrote:
> >
> > Karl
> >
> > We would be thrilled with any pictures you could
> provide for us! Do
> you know how the fuselage tubing was painted? We
> believe that the
> frame is zinc chromate, but are unsure what was
> applied to the visible
> structure in the cockpit.
> >
> > Thanks again!
> >
> > Ashley and Peggy
> >
> > [Non-text portions of this message have been
> removed]
> >
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'

Karl Saenger · Post by **Karl Saenger** » Wed Dec 27, 2006 3:12 am

'Hi Jim,

Good to hear from you. I will send pictures about interior and tail
wheel installation by e-mail.

Regards

Karl

--- In fairchildclub@yahoogroups.com, james chybicki
wrote:

>
> Hi Karl-
> Can you please copy me also on the interior pictures
> Thanks!
> Jim Chybicki
> UC-61K
> rampratone@...
> p.s. We still have the full swivel tailwheel, can you
> please explain the mounting procedure to the lower
> portion of the frame. Our tailwheel strut assembly
> only has a thin "L" shape bracket that lines up with a
> hole on the frame, but it does not look strong enought
> to support tail wheel landings. Since teh full swivel
> was a RAF Modification the USAAF Manuals do not show
> how to install these particular tailwheels.
> any assistance will be greatly appreciated
> Keep 'Em Flying
>
>
>
> --- Karl Saenger wrote:
>
> >
> > Ashley,
> >
> > I will send an e-mail with attachements to you
> > shortly.
> >
> > Karl
> >
> >
> > --- In fairchildclub@yahoogroups.com, "Ashley
> > Messenger"
> > wrote:
> > >
> > > Karl
> > >
> > > We would be thrilled with any pictures you could
> > provide for us! Do
> > you know how the fuselage tubing was painted? We
> > believe that the
> > frame is zinc chromate, but are unsure what was
> > applied to the visible
> > structure in the cockpit.
> > >
> > > Thanks again!
> > >
> > > Ashley and Peggy
> > >
> > > [Non-text portions of this message have been
> > removed]
> > >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>

'

fchld · Post by **fchld** » Wed Dec 27, 2006 7:55 am

'Karl

Could you send the club the information also.

John Berendt

----- Original Message -----
From: Karl Saenger
To: fairchildclub@yahoogroups.com
Sent: Wednesday, December 27, 2006 3:10 AM
Subject: [fairchildclub] Re: Restoration advice & Tail wheel install

Hi Jim,

Good to hear from you. I will send pictures about interior and tail
wheel installation by e-mail.

Regards

Karl

--- In fairchildclub@yahoogroups.com, james chybicki
wrote:
>
> Hi Karl-
> Can you please copy me also on the interior pictures
> Thanks!
> Jim Chybicki
> UC-61K
> rampratone@...
> p.s. We still have the full swivel tailwheel, can you
> please explain the mounting procedure to the lower
> portion of the frame. Our tailwheel strut assembly
> only has a thin "L" shape bracket that lines up with a
> hole on the frame, but it does not look strong enought
> to support tail wheel landings. Since teh full swivel
> was a RAF Modification the USAAF Manuals do not show
> how to install these particular tailwheels.
> any assistance will be greatly appreciated
> Keep 'Em Flying
>
>
>
> --- Karl Saenger wrote:
>
> >
> > Ashley,
> >
> > I will send an e-mail with attachements to you
> > shortly.
> >
> > Karl
> >
> >
> > --- In fairchildclub@yahoogroups.com, "Ashley
> > Messenger"
> > wrote:
> > >
> > > Karl
> > >
> > > We would be thrilled with any pictures you could
> > provide for us! Do
> > you know how the fuselage tubing was painted? We
> > believe that the
> > frame is zinc chromate, but are unsure what was
> > applied to the visible
> > structure in the cockpit.
> > >
> > > Thanks again!
> > >
> > > Ashley and Peggy
> > >
> > > [Non-text portions of this message have been
> > removed]
> > >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>

[Non-text portions of this message have been removed]

'

fchld · Post by **fchld** » Wed Dec 27, 2006 8:00 am

'Karl,

Could you also send the club the information I get requests for the same information.

John Berendt

----- Original Message -----
From: james chybicki
To: fairchildclub@yahoogroups.com
Sent: Tuesday, December 26, 2006 3:09 PM
Subject: [fairchildclub] Restoration advice & Tail wheel install

Hi Karl-
Can you please copy me also on the interior pictures
Thanks!
Jim Chybicki
UC-61K
rampratone@yahoo.com
p.s. We still have the full swivel tailwheel, can you
please explain the mounting procedure to the lower
portion of the frame. Our tailwheel strut assembly
only has a thin "L" shape bracket that lines up with a
hole on the frame, but it does not look strong enought
to support tail wheel landings. Since teh full swivel
was a RAF Modification the USAAF Manuals do not show
how to install these particular tailwheels.
any assistance will be greatly appreciated
Keep 'Em Flying

--- Karl Saenger wrote:

>
> Ashley,
>
> I will send an e-mail with attachements to you
> shortly.
>
> Karl
>
>
> --- In fairchildclub@yahoogroups.com, "Ashley
> Messenger"
> wrote:
> >
> > Karl
> >
> > We would be thrilled with any pictures you could
> provide for us! Do
> you know how the fuselage tubing was painted? We
> believe that the
> frame is zinc chromate, but are unsure what was
> applied to the visible
> structure in the cockpit.
> >
> > Thanks again!
> >
> > Ashley and Peggy
> >
> > [Non-text portions of this message have been
> removed]
> >
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]

'

Karl Saenger · Post by **Karl Saenger** » Thu Dec 28, 2006 2:40 am

'John,

I will send the the same info to the club shortly but I want to
collect more data about UC-61's and burn a CD.

Karl Saenger UC-61K # 43-14927

--- In fairchildclub@yahoogroups.com, "fchld" wrote:
>
> Karl,
>
> Could you also send the club the information I get requests for the
same information.
>
> John Berendt

'

Karl Saenger · Post by **Karl Saenger** » Thu Dec 28, 2006 2:53 am

'John,

I will send the the same info to the club shortly but I want to
collect more data about UC-61's and burn a CD.

Karl Saenger UC-61K # 43-14927

--- In fairchildclub@yahoogroups.com, "fchld" wrote:
>
> Karl,
>
> Could you also send the club the information I get requests for the
same information.
>
> John Berendt

'

fchld · Post by **fchld** » Thu Dec 28, 2006 8:19 am

'Karl,

Thank you I will wait for the information.

John

----- Original Message -----
From: Karl Saenger
To: fairchildclub@yahoogroups.com
Sent: Thursday, December 28, 2006 2:38 AM
Subject: [fairchildclub] Re: Restoration advice & Tail wheel install

John,

I will send the the same info to the club shortly but I want to
collect more data about UC-61's and burn a CD.

Karl Saenger UC-61K # 43-14927

--- In fairchildclub@yahoogroups.com, "fchld" wrote:
>
> Karl,
>
> Could you also send the club the information I get requests for the
same information.
>
> John Berendt

[Non-text portions of this message have been removed]

'

james chybicki · Post by **james chybicki** » Thu Dec 28, 2006 2:58 pm

'Hi Karl-
Please let me know if there is anything we can do to
help
Jim Chybicki/ Bob Coon
UC-61K 43-14964 /HB-690
--- Karl Saenger wrote:

> John,
>
> I will send the the same info to the club shortly
> but I want to
> collect more data about UC-61's and burn a CD.
>
> Karl Saenger UC-61K # 43-14927
>
>
>
> --- In fairchildclub@yahoogroups.com, "fchld"
> wrote:
> >
> > Karl,
> >
> > Could you also send the club the information I get
> requests for the
> same information.
> >
> > John Berendt
>
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'