Re: Drawing project

[Pilot4906@aol.com]

'Hi Jamie,

If the drawings you are working on are different than the ones I am working
on, I would also be interested in buying the disk you are developing. Never
enough information . We have had two cable assy built from the drawings we
have for the L5.

If you have an example of one of the drawings you could email, I would like
to see one.

The stuff I am working with is individual parts for sure and I expect some
will be assy. with reference to individual parts.

Gene Haines
585-682-3279


[Non-text portions of this message have been removed]'

[Jamie S. Treat]

'Fairchild Group,

Somebody must have dug up an old email from years ago. The club does not
have any other drawing project going on at this time. NASM turned me down a
few years ago with the remainder of the drawings for the Fairchild series.

What we have on the current CD ROM is the latest we have.

Jamie

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark (CO15)
http://www.kellyairpark.com
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com

----- Original Message -----
From:
To:
Sent: Monday, April 03, 2006 7:15 PM
Subject: [fairchildclub] Drawing project


> Hi Jamie,
>
> If the drawings you are working on are different than the ones I am
> working
> on, I would also be interested in buying the disk you are developing.
> Never
> enough information . We have had two cable assy built from the drawings
> we
> have for the L5.
>
> If you have an example of one of the drawings you could email, I would
> like
> to see one.
>
> The stuff I am working with is individual parts for sure and I expect some
> will be assy. with reference to individual parts.
>
> Gene Haines
> 585-682-3279
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[Pilot4906@aol.com]

'OK, I will let you know how the ones I am working on turn out.

Gene


[Non-text portions of this message have been removed]'

[Jamie S. Treat]

'Sounds good. Would go nice with the 3 CD Set I'm building.

Jamie

----- Original Message -----
From:
To:
Sent: Tuesday, April 04, 2006 1:34 AM
Subject: Re: [fairchildclub] Drawing project


> OK, I will let you know how the ones I am working on turn out.
>
> Gene
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[James]

'Hi Jamie-/Club-
My partner Bob Coon and I are interested in the Drawings on CD.
Please let us know what we can do to help
thanks!
Jim Chybicki
UC-61K 43-14964/HB-690






--- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
wrote:

>
> Fairchild Group,
>
> Somebody must have dug up an old email from years ago. The club

does not

> have any other drawing project going on at this time. NASM turned

me down a

> few years ago with the remainder of the drawings for the Fairchild

series.

>
> What we have on the current CD ROM is the latest we have.
>
> Jamie
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark (CO15)
> http://www.kellyairpark.com
> Elbert, CO 80106
> HM/Shop 303-648-0130
> JamieTreat@...
>
>
> ----- Original Message -----
> From:
> To:
> Sent: Monday, April 03, 2006 7:15 PM
> Subject: [fairchildclub] Drawing project
>
>
> > Hi Jamie,
> >
> > If the drawings you are working on are different than the ones I

am

> > working
> > on, I would also be interested in buying the disk you are

developing.

> > Never
> > enough information . We have had two cable assy built from the

drawings

> > we
> > have for the L5.
> >
> > If you have an example of one of the drawings you could email, I

would

> > like
> > to see one.
> >
> > The stuff I am working with is individual parts for sure and I

expect some

> > will be assy. with reference to individual parts.
> >
> > Gene Haines
> > 585-682-3279
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>

'

[John Berendt]

'Jim,

The CD project was completed over a year ago. The CD is available from the
club for $40.00 it has the F24-46 drawings on it.

John berendt

----- Original Message -----
From: "James"
To:
Sent: Tuesday, April 11, 2006 11:27 AM
Subject: [fairchildclub] Re: Drawing project


> Hi Jamie-/Club-
> My partner Bob Coon and I are interested in the Drawings on CD.
> Please let us know what we can do to help
> thanks!
> Jim Chybicki
> UC-61K 43-14964/HB-690
>
>
>
>
>
>
> --- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
> wrote:
> >
> > Fairchild Group,
> >
> > Somebody must have dug up an old email from years ago. The club
> does not
> > have any other drawing project going on at this time. NASM turned
> me down a
> > few years ago with the remainder of the drawings for the Fairchild
> series.
> >
> > What we have on the current CD ROM is the latest we have.
> >
> > Jamie
> >
> > Jamie S. Treat A&P/IA
> > Aircraft Restoration & Repair
> > 24201 David C. Johnson Loop
> > Kelly Airpark (CO15)
> > http://www.kellyairpark.com
> > Elbert, CO 80106
> > HM/Shop 303-648-0130
> > JamieTreat@...
> >
> >
> > ----- Original Message -----
> > From:
> > To:
> > Sent: Monday, April 03, 2006 7:15 PM
> > Subject: [fairchildclub] Drawing project
> >
> >
> > > Hi Jamie,
> > >
> > > If the drawings you are working on are different than the ones I
> am
> > > working
> > > on, I would also be interested in buying the disk you are
> developing.
> > > Never
> > > enough information . We have had two cable assy built from the
> drawings
> > > we
> > > have for the L5.
> > >
> > > If you have an example of one of the drawings you could email, I
> would
> > > like
> > > to see one.
> > >
> > > The stuff I am working with is individual parts for sure and I
> expect some
> > > will be assy. with reference to individual parts.
> > >
> > > Gene Haines
> > > 585-682-3279
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[Jay Thomson]

'Hi Jim;
What engine does your UC-61 have and where are you located? Jay

James wrote:
Hi Jamie-/Club-
My partner Bob Coon and I are interested in the Drawings on CD.
Please let us know what we can do to help
thanks!
Jim Chybicki
UC-61K 43-14964/HB-690






--- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
wrote:

>
> Fairchild Group,
>
> Somebody must have dug up an old email from years ago. The club

does not

> have any other drawing project going on at this time. NASM turned

me down a

> few years ago with the remainder of the drawings for the Fairchild

series.

>
> What we have on the current CD ROM is the latest we have.
>
> Jamie
>
> Jamie S. Treat A&P/IA
> Aircraft Restoration & Repair
> 24201 David C. Johnson Loop
> Kelly Airpark (CO15)
> http://www.kellyairpark.com
> Elbert, CO 80106
> HM/Shop 303-648-0130
> JamieTreat@...
>
>
> ----- Original Message -----
> From:
> To:
> Sent: Monday, April 03, 2006 7:15 PM
> Subject: [fairchildclub] Drawing project
>
>
> > Hi Jamie,
> >
> > If the drawings you are working on are different than the ones I

am

> > working
> > on, I would also be interested in buying the disk you are

developing.

> > Never
> > enough information . We have had two cable assy built from the

drawings

> > we
> > have for the L5.
> >
> > If you have an example of one of the drawings you could email, I

would

> > like
> > to see one.
> >
> > The stuff I am working with is individual parts for sure and I

expect some

> > will be assy. with reference to individual parts.
> >
> > Gene Haines
> > 585-682-3279
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>

---------------------------------
YAHOO! GROUPS LINKS


Visit your group "fairchildclub" on the web.

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


---------------------------------





---------------------------------
Blab-away for as little as 1¢/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice.

[Non-text portions of this message have been removed]'

[james chybicki]

'Hi Jay-
We have a "K" model with the Ranger Engine.
Our Plane is Located at CLOW Airport about 35 miles
South West of Chicago.
Do you have one?
Jim

--- Jay Thomson wrote:

> Hi Jim;
> What engine does your UC-61 have and where
> are you located? Jay
>
> James wrote:
> Hi Jamie-/Club-
> My partner Bob Coon and I are interested in the
> Drawings on CD.
> Please let us know what we can do to help
> thanks!
> Jim Chybicki
> UC-61K 43-14964/HB-690
>
>
>
>
>
>
> --- In fairchildclub@yahoogroups.com, "Jamie S.
> Treat"
> wrote:
> >
> > Fairchild Group,
> >
> > Somebody must have dug up an old email from years
> ago. The club
> does not
> > have any other drawing project going on at this
> time. NASM turned
> me down a
> > few years ago with the remainder of the drawings
> for the Fairchild
> series.
> >
> > What we have on the current CD ROM is the latest
> we have.
> >
> > Jamie
> >
> > Jamie S. Treat A&P/IA
> > Aircraft Restoration & Repair
> > 24201 David C. Johnson Loop
> > Kelly Airpark (CO15)
> > http://www.kellyairpark.com
> > Elbert, CO 80106
> > HM/Shop 303-648-0130
> > JamieTreat@...
> >
> >
> > ----- Original Message -----
> > From:
> > To:
> > Sent: Monday, April 03, 2006 7:15 PM
> > Subject: [fairchildclub] Drawing project
> >
> >
> > > Hi Jamie,
> > >
> > > If the drawings you are working on are different
> than the ones I
> am
> > > working
> > > on, I would also be interested in buying the
> disk you are
> developing.
> > > Never
> > > enough information . We have had two cable assy
> built from the
> drawings
> > > we
> > > have for the L5.
> > >
> > > If you have an example of one of the drawings
> you could email, I
> would
> > > like
> > > to see one.
> > >
> > > The stuff I am working with is individual parts
> for sure and I
> expect some
> > > will be assy. with reference to individual
> parts.
> > >
> > > Gene Haines
> > > 585-682-3279
> > >
> > >
> > > [Non-text portions of this message have been
> removed]
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
> ---------------------------------
> YAHOO! GROUPS LINKS
>
>
> Visit your group "fairchildclub" on the web.
>
> To unsubscribe from this group, send an email
> to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service.
>
>
> ---------------------------------
>
>
>
>
>
> ---------------------------------
> Blab-away for as little as 1¢/min. Make PC-to-Phone
> Calls using Yahoo! Messenger with Voice.
>
> [Non-text portions of this message have been
> removed]
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'

[james chybicki]

'We have that CD, I has come in very handy! I thought
it was something new.
Any idea where I can find 2 of the fuse boxes that go
above the rear windows? Mine are missining in action
Jim

--- John Berendt wrote:

> Jim,
>
> The CD project was completed over a year ago. The CD
> is available from the
> club for $40.00 it has the F24-46 drawings on it.
>
> John berendt
> ----- Original Message -----
> From: "James"
> To:
> Sent: Tuesday, April 11, 2006 11:27 AM
> Subject: [fairchildclub] Re: Drawing project
>
>
> > Hi Jamie-/Club-
> > My partner Bob Coon and I are interested in the
> Drawings on CD.
> > Please let us know what we can do to help
> > thanks!
> > Jim Chybicki
> > UC-61K 43-14964/HB-690
> >
> >
> >
> >
> >
> >
> > --- In fairchildclub@yahoogroups.com, "Jamie S.
> Treat"
> > wrote:
> > >
> > > Fairchild Group,
> > >
> > > Somebody must have dug up an old email from
> years ago. The club
> > does not
> > > have any other drawing project going on at this
> time. NASM turned
> > me down a
> > > few years ago with the remainder of the drawings
> for the Fairchild
> > series.
> > >
> > > What we have on the current CD ROM is the latest
> we have.
> > >
> > > Jamie
> > >
> > > Jamie S. Treat A&P/IA
> > > Aircraft Restoration & Repair
> > > 24201 David C. Johnson Loop
> > > Kelly Airpark (CO15)
> > > http://www.kellyairpark.com
> > > Elbert, CO 80106
> > > HM/Shop 303-648-0130
> > > JamieTreat@...
> > >
> > >
> > > ----- Original Message -----
> > > From:
> > > To:
> > > Sent: Monday, April 03, 2006 7:15 PM
> > > Subject: [fairchildclub] Drawing project
> > >
> > >
> > > > Hi Jamie,
> > > >
> > > > If the drawings you are working on are
> different than the ones I
> > am
> > > > working
> > > > on, I would also be interested in buying the
> disk you are
> > developing.
> > > > Never
> > > > enough information . We have had two cable
> assy built from the
> > drawings
> > > > we
> > > > have for the L5.
> > > >
> > > > If you have an example of one of the drawings
> you could email, I
> > would
> > > > like
> > > > to see one.
> > > >
> > > > The stuff I am working with is individual
> parts for sure and I
> > expect some
> > > > will be assy. with reference to individual
> parts.
> > > >
> > > > Gene Haines
> > > > 585-682-3279
> > > >
> > > >
> > > > [Non-text portions of this message have been
> removed]
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam
protection around
http://mail.yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'

[fairchild24pilot]

'Hi Jim;
I have a F24R46 that we are trying to get approved for the 200hp
engine. I am looking for a UC61 that has a 200hp Ranger in it so we
can prove to the gestapo (faa) that the mount in the UC61 and the R46
have the same part number. Is yours 200hp? Jay'