Re: Exhaust Stud nuts

[Michael Danielle]

'During my last engine removal, I had one of the exhaust stud nuts
seize and strip. These are the deep brass nuts that hold the exhause
flanges on.

Does anyone here know of a source?

Thanks,
Mike in Oregon'

[Jamie S. Treat]

'Mike,

Fresno Airparts has them along with the gaskets.

Jamie S. Treat A&P/IA
Aircraft Restoration & Repair
24201 David C. Johnson Loop
Kelly Airpark
http://www.kellyairpark.com
Elbert, CO 80106
HM/Shop 303-648-0130
JamieTreat@direcway.com

----- Original Message -----
From: "Michael Danielle"
To:
Sent: Monday, January 30, 2006 1:58 PM
Subject: [fairchildclub] Exhaust Stud nuts


> During my last engine removal, I had one of the exhaust stud nuts
> seize and strip. These are the deep brass nuts that hold the exhause
> flanges on.
>
> Does anyone here know of a source?
>
> Thanks,
> Mike in Oregon
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

'

[danMichael]

'Mike:

> During my last engine removal, I had one of the exhaust stud nuts
> seize and strip. These are the deep brass nuts that hold the exhause
> flanges on.
>
> Does anyone here know of a source?

I had to replace mine last time I had the exhaust off. Im pretty
sure these are the same brass 5/16-24 nuts used on small
Continentals (O-200, etc.). I believe the Aircraft Spruce part
number is 22022, $.86 / each.

Dont forget the MS27151-16 PAL stamped locknuts. I found that I had
to thread them on simultaneously with the exhaust nuts or there wasnt
enough clearance to get them on.

:Dan Michael
:NC81323'

[John Berendt]

'Mike
Try Fresno Airparts the may have some.

----- Original Message -----
From: "Michael Danielle"
To:
Sent: Monday, January 30, 2006 2:58 PM
Subject: [fairchildclub] Exhaust Stud nuts


> During my last engine removal, I had one of the exhaust stud nuts
> seize and strip. These are the deep brass nuts that hold the exhause
> flanges on.
>
> Does anyone here know of a source?
>
> Thanks,
> Mike in Oregon
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

'