SV: [fairchildclub] Re: Wanted - Warner Super Scarab 165 D Engine or

mark_pilkington2000 · Post by **mark_pilkington2000** » Mon Nov 21, 2005 4:41 am

'Wanted for restoration project, Warner Super Scarab 165D Engine or
parts, especially:

INDUCTION HOUSING ASSEMBLY # 7910
OIL PUMP ASSEMBLY #8733

regards

Mark Pilkington

Victoria, Australia'

John Duncan · Post by **John Duncan** » Mon Nov 21, 2005 10:45 am

'Hello Mark,

Induction housings are very scarce; I will try to find one and let you know. I am negotiating with a source to have some new housings cast, so if you are not in a hurry, I might be able to come up with a new one. I will check on an oil pump assembly also.

Your thoughts?

Regards,
John Duncan

----- Original Message -----
From: mark_pilkington2000
To: fairchildclub@yahoogroups.com
Sent: Monday, November 21, 2005 3:41 AM
Subject: [fairchildclub] Wanted - Warner Super Scarab 165 D Engine or parts

Wanted for restoration project, Warner Super Scarab 165D Engine or
parts, especially:

INDUCTION HOUSING ASSEMBLY # 7910
OIL PUMP ASSEMBLY #8733

regards

Mark Pilkington

Victoria, Australia

------------------------------------------------------------------------------
YAHOO! GROUPS LINKS

a.. Visit your group "fairchildclub" on the web.

b.. To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

------------------------------------------------------------------------------

[Non-text portions of this message have been removed]

'

mark_pilkington2000 · Mon Nov 21, 2005 10:57 pm

'Hi John,

thanks for your offer of assistance, I am certainly interested in any new
build housings, or any orginals you can find, I may have the opportunity
to swap a damaged but externally complete induction housing for a good
unit from a static display engine so I am interested in induction housings
of any condition.

regards

Mark

--- In fairchildclub@yahoogroups.com, "John Duncan"
wrote:

>
> Hello Mark,
>
> Induction housings are very scarce; I will try to find one and let you

know. I am negotiating with a source to have some new housings cast,
so if you are not in a hurry, I might be able to come up with a new one.
I will check on an oil pump assembly also.

>
> Your thoughts?
>
> Regards,
> John Duncan
> ----- Original Message -----
> From: mark_pilkington2000
> To:

fairchildclub@yahoogroups.com

> Sent: Monday, November 21, 2005 3:41 AM
> Subject: [fairchildclub] Wanted - Warner Super Scarab 165 D Engine

or parts

>
>
> Wanted for restoration project, Warner Super Scarab 165D Engine

or

> parts, especially:
>
> INDUCTION HOUSING ASSEMBLY # 7910
> OIL PUMP ASSEMBLY #8733
>
> regards
>
> Mark Pilkington
>
> Victoria, Australia
>
>
>
>
>
> ------------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> a.. Visit your

group "fairchildclub" on
the web.

>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> ------------------------------------------------------------------------------
>
>
>
> [Non-text portions of this message have been removed]
>
'

mark_pilkington2000 · Post by **mark_pilkington2000** » Wed Feb 16, 2011 3:12 pm

'John

did you ever proceed with the manufacture of new induction housings?

Regards

Mark Pilkington

--- In fairchildclub@yahoogroups.com, "John Duncan" wrote:
>
> Hello Mark,
>
> Induction housings are very scarce; I will try to find one and let you know. I am negotiating with a source to have some new housings cast, so if you are not in a hurry, I might be able to come up with a new one. I will check on an oil pump assembly also.
>
> Your thoughts?
>
> Regards,
> John Duncan
> ----- Original Message -----
> From: mark_pilkington2000
> To: fairchildclub@yahoogroups.com
> Sent: Monday, November 21, 2005 3:41 AM
> Subject: [fairchildclub] Wanted - Warner Super Scarab 165 D Engine or parts
>
>
> Wanted for restoration project, Warner Super Scarab 165D Engine or
> parts, especially:
>
> INDUCTION HOUSING ASSEMBLY # 7910
> OIL PUMP ASSEMBLY #8733
>
> regards
>
> Mark Pilkington
>
> Victoria, Australia
>
>
>
>
>
> ------------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
> a.. Visit your group "fairchildclub" on the web.
>
> b.. To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ------------------------------------------------------------------------------
>
>
>
> [Non-text portions of this message have been removed]
>

'

paul pinato · Post by **paul pinato** » Sun Feb 20, 2011 6:02 am

'Hi

Se that you are talking about induction housings.
I have one that needs to change the gear bushings.
Does somebody know where to find the tools for the
reamers. It is shown in the Warner manual.

Paul Pinato

Kohagsvägen 41

59072 Ljungsbro

Sweden

+46-(0)705411118

paul.pinato@swipnet.se

Från: fairchildclub@yahoogroups.com
[mailto:fairchildclub@yahoogroups.com] För
mark_pilkington2000
Skickat: den 16 februari 2011 22:13
Till: fairchildclub@yahoogroups.com
Ämne: [fairchildclub] Re: Wanted - Warner Super
Scarab 165 D Engine or parts

John

did you ever proceed with the manufacture of new
induction housings?

Regards

Mark Pilkington

--- In fairchildclub@yahoogroups.com
, "John
Duncan" wrote:

>
> Hello Mark,
>
> Induction housings are very scarce; I will try

to find one and let you know. I am negotiating
with a source to have some new housings cast, so
if you are not in a hurry, I might be able to come
up with a new one. I will check on an oil pump
assembly also.

>
> Your thoughts?
>
> Regards,
> John Duncan
> ----- Original Message -----
> From:

mark_pilkington2000

> To: fairchildclub@yahoogroups.com

> Sent: Monday, November 21, 2005 3:41 AM
> Subject: [fairchildclub] Wanted - Warner Super

Scarab 165 D Engine or parts

>
>
> Wanted for restoration project, Warner Super

Scarab 165D Engine or

> parts, especially:
>
> INDUCTION HOUSING ASSEMBLY # 7910
> OIL PUMP ASSEMBLY #8733
>
> regards
>
> Mark Pilkington
>
> Victoria, Australia
>
>
>
>
>
>

--------------------------------------------------
--------

> YAHOO! GROUPS LINKS
>
> a.. Visit your group

"fairchildclub" on the web.

>
> b.. To unsubscribe from this group, send an

email to:

> fairchildclub-unsubscribe@yahoogroups.com

>
> c.. Your use of Yahoo! Groups is subject to the

Yahoo! Terms of
Service.

>
>
>

--------------------------------------------------
--------

>
>
>
> [Non-text portions of this message have been

removed]

>

[Non-text portions of this message have been removed]'

Tom_Downey · Post by **Tom_Downey** » Sun Feb 20, 2011 10:41 am

'I just bought the tools and bushings for my housing.

I can do your housing if you send it to me.

Rather than usu a reamer, use a lap.

http://www.americanlap.com/Catalog%20Scan.pdf

and the bushings can be found at

http://www.asbbearings.com/cast_bronze_Bearings.html

Tom D

Hi,
I see that you are talking about induction housings. I have one that needs to change the gear bushings. Does somebody know where to find the tools for the reamers. It is shown in the Warner manual.
Paul Pinato
Kohagsvägen 41
59072 Ljungsbro
Sweden
+46-(0)705411118
paul.pinato@...'