Re: Wing Paint

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
kgassert
Posts: 1
Joined: Mon Mar 07, 2005 8:36 pm

Re: Wing Paint

Post by kgassert »

'Sure, someone may give you a job to do though. Normal schedule is
Tuesday and Thursday 3 to 8 and Saturday 10 to 6. I usually am there
Saturday's after one.

Kevin
--- In fairchildclub@yahoogroups.com, Jan Servaites
wrote:
> kgassert wrote:
>
> >
> > I am involved in the restoration of a PT19 that has been
converted
> > to a PT26
>
> I would really like to come over and see what you guys are doing.
I'm
> just 30 miles away. Do you welcome visitors?
>
> --
> Jan Servaites (Dayton OH - The Birthplace of Aviation)
'
Top
Thekortas@aol.com
Posts: 46
Joined: Sat Feb 17, 2001 4:09 pm

Re: Wing Paint

Post by Thekortas@aol.com »

'Hey Mike, is there a fabric overlap on the leading edge? Tape? Any info
and/or suggestions you have on this aspect or suggestions where there may be
factory drawings or ???? would be appreciated. Thank you
Steve Korta


[Non-text portions of this message have been removed]'
Top
kgassert
Posts: 1
Joined: Mon Mar 07, 2005 8:36 pm

Re: Wing Paint

Post by kgassert »

'Sure, The work schedule is Tues and Thursday 3 to 8 and Saturday 10
to 6. I am usually there on Saturday after 1 or so.

Kevin
--- In fairchildclub@yahoogroups.com, Jan Servaites
wrote:
> kgassert wrote:
>
> >
> > I am involved in the restoration of a PT19 that has been
converted
> > to a PT26
>
> I would really like to come over and see what you guys are doing.
I'm
> just 30 miles away. Do you welcome visitors?
>
> --
> Jan Servaites (Dayton OH - The Birthplace of Aviation)
'
Top
Michael Denest
Posts: 172
Joined: Sat Sep 15, 2001 9:56 am

Re: Wing Paint

Post by Michael Denest »

'Since you will be fabric, the normal overlaps
recommended by the manufacturer and AC 43-13-1B should
be used. Then, apply tape over the joint to reinforce
the overlap. There are no factory drawings of fabric
covering on the wings as a filler was used.

Mike

--- Thekortas@aol.com wrote:
> Hey Mike, is there a fabric overlap on the leading
> edge? Tape? Any info
> and/or suggestions you have on this aspect or
> suggestions where there may be
> factory drawings or ???? would be appreciated.
> Thank you
> Steve Korta
>
>
> [Non-text portions of this message have been
> removed]
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com'
Top
Post Reply

Return to “Yahoo Group Archives”