Re: drag link

robert hensarling · Post by **robert hensarling** » Fri Jun 27, 2003 7:28 am

'Looking for a good drag link for my PT-19. Mine appears to have a small fracture in the web. May be a result of the shimmying ( $1,100 in tailwheel "overhauls" and still climbing

)
Someday will get that darn problem solved. Have quite flying my airplane because of this. 1.7 TT in one year, not good.
Please email me at rhrocker@hilconet.com
Robert
Uvalde, TX

[Non-text portions of this message have been removed]'

John Berendt · Post by **John Berendt** » Sun Jun 29, 2003 7:23 pm

'Bob,

I may have a spare drag link that has a good repair on it. I will go to the
hanger and take a look this week. Do you have a copy of herb pucket's book,
in there is a good chapter on tail wheel shimmy. I f you do not let me know
and I will copy the pages and send them to you.

John Berendt

----- Original Message -----
From: "robert hensarling"
To:
Sent: Friday, June 27, 2003 8:31 AM
Subject: [fairchildclub] drag link

> Looking for a good drag link for my PT-19. Mine appears to have a small
fracture in the web. May be a result of the shimmying ( $1,100 in tailwheel
"overhauls" and still climbing )
> Someday will get that darn problem solved. Have quite flying my airplane
because of this. 1.7 TT in one year, not good.
> Please email me at rhrocker@hilconet.com
> Robert
> Uvalde, TX
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

robert hensarling · Post by **robert hensarling** » Sun Jun 29, 2003 7:57 pm

'

----- Original Message -----
From: John Berendt
To: fairchildclub@yahoogroups.com
Sent: Sunday, June 29, 2003 8:30 PM
Subject: Re: [fairchildclub] drag link

Hi John, many many thanks for looking for a drag link. Yes, I have Herb's book, and have tried the nylon washer. So far, I've not have any luck with any of the repairs, but I'm not giving up. Let me know what you might want for the drag link and I'll get a check off to you.
Thanks!
Robert Hensarling

Bob,

I may have a spare drag link that has a good repair on it. I will go to the
hanger and take a look this week. Do you have a copy of herb pucket's book,
in there is a good chapter on tail wheel shimmy. I f you do not let me know
and I will copy the pages and send them to you.

John Berendt
----- Original Message -----
From: "robert hensarling"
To:
Sent: Friday, June 27, 2003 8:31 AM
Subject: [fairchildclub] drag link

> Looking for a good drag link for my PT-19. Mine appears to have a small
fracture in the web. May be a result of the shimmying ( $1,100 in tailwheel
"overhauls" and still climbing )
> Someday will get that darn problem solved. Have quite flying my airplane
because of this. 1.7 TT in one year, not good.
> Please email me at rhrocker@hilconet.com
> Robert
> Uvalde, TX
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

robert hensarling · Post by **robert hensarling** » Wed Jul 02, 2003 6:40 am

'

----- Original Message -----
From: John Berendt
To: fairchildclub@yahoogroups.com
Sent: Sunday, June 29, 2003 8:30 PM
Subject: Re: [fairchildclub] drag link

By the way Bob, can the drag link be welded? Mine has a small fracture in the web area. I just it couldn't be welded, since I was told by a friend that the aluminum yoke couldn't be welded. I thought it may be the same material.

Bob,

I may have a spare drag link that has a good repair on it. I will go to the
hanger and take a look this week. Do you have a copy of herb pucket's book,
in there is a good chapter on tail wheel shimmy. I f you do not let me know
and I will copy the pages and send them to you.

John Berendt
----- Original Message -----
From: "robert hensarling"
To:
Sent: Friday, June 27, 2003 8:31 AM
Subject: [fairchildclub] drag link

> Looking for a good drag link for my PT-19. Mine appears to have a small
fracture in the web. May be a result of the shimmying ( $1,100 in tailwheel
"overhauls" and still climbing )
> Someday will get that darn problem solved. Have quite flying my airplane
because of this. 1.7 TT in one year, not good.
> Please email me at rhrocker@hilconet.com
> Robert
> Uvalde, TX
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

Airy-Hugues Millet · Post by **Airy-Hugues Millet** » Wed Jul 02, 2003 12:37 pm

'just an advice: every current materials can be weld, but the tricky thing is
to find the right process and the right welding material!!!

>From: "robert hensarling"
>Reply-To: fairchildclub@yahoogroups.com
>To:
>Subject: Re: [fairchildclub] drag link
>Date: Wed, 2 Jul 2003 07:42:57 -0500
>
>
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, June 29, 2003 8:30 PM
> Subject: Re: [fairchildclub] drag link
>
> By the way Bob, can the drag link be welded? Mine has a small fracture
>in the web area. I just it couldn't be welded, since I was told by a
>friend that the aluminum yoke couldn't be welded. I thought it may be the
>same material.
>
>
> Bob,
>
> I may have a spare drag link that has a good repair on it. I will go to
>the
> hanger and take a look this week. Do you have a copy of herb pucket's
>book,
> in there is a good chapter on tail wheel shimmy. I f you do not let me
>know
> and I will copy the pages and send them to you.
>
> John Berendt
> ----- Original Message -----
> From: "robert hensarling"
> To:
> Sent: Friday, June 27, 2003 8:31 AM
> Subject: [fairchildclub] drag link
>
>
> > Looking for a good drag link for my PT-19. Mine appears to have a
>small
> fracture in the web. May be a result of the shimmying ( $1,100 in
>tailwheel
> "overhauls" and still climbing )
> > Someday will get that darn problem solved. Have quite flying my
>airplane
> because of this. 1.7 TT in one year, not good.
> > Please email me at rhrocker@hilconet.com
> > Robert
> > Uvalde, TX
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
>http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>[Non-text portions of this message have been removed]
>

_________________________________________________________________
Trouvez l'âme soeur sur MSN Rencontres ! http://g.msn.fr/FR1000/9551'

robert Etter · Post by **robert Etter** » Wed Jul 02, 2003 3:29 pm

'As a guess, it would like welding the induction housing on a Warner motor.
The item to be welded would need to be placed into an oven and warmed to a
pretty toasty temperature before it can be welded.
I have one that is cracked. One known crack on the inner edge, if any one
needs it for practice and or possibly repair. I no longer have a need for
it, and it's too light to be used as a door stop.
Bob

----- Original Message -----
From: "Airy-Hugues Millet"
To:
Sent: Wednesday, July 02, 2003 11:37 AM
Subject: Re: [fairchildclub] drag link

> just an advice: every current materials can be weld, but the tricky thing
is
> to find the right process and the right welding material!!!
>
>
> >From: "robert hensarling"
> >Reply-To: fairchildclub@yahoogroups.com
> >To:
> >Subject: Re: [fairchildclub] drag link
> >Date: Wed, 2 Jul 2003 07:42:57 -0500
> >
> >
> > ----- Original Message -----
> > From: John Berendt
> > To: fairchildclub@yahoogroups.com
> > Sent: Sunday, June 29, 2003 8:30 PM
> > Subject: Re: [fairchildclub] drag link
> >
> > By the way Bob, can the drag link be welded? Mine has a small
fracture
> >in the web area. I just it couldn't be welded, since I was told by a
> >friend that the aluminum yoke couldn't be welded. I thought it may be
the
> >same material.
> >
> >
> > Bob,
> >
> > I may have a spare drag link that has a good repair on it. I will go
to
> >the
> > hanger and take a look this week. Do you have a copy of herb pucket's
> >book,
> > in there is a good chapter on tail wheel shimmy. I f you do not let
me
> >know
> > and I will copy the pages and send them to you.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "robert hensarling"
> > To:
> > Sent: Friday, June 27, 2003 8:31 AM
> > Subject: [fairchildclub] drag link
> >
> >
> > > Looking for a good drag link for my PT-19. Mine appears to have a
> >small
> > fracture in the web. May be a result of the shimmying ( $1,100 in
> >tailwheel
> > "overhauls" and still climbing )
> > > Someday will get that darn problem solved. Have quite flying my
> >airplane
> > because of this. 1.7 TT in one year, not good.
> > > Please email me at rhrocker@hilconet.com
> > > Robert
> > > Uvalde, TX
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> >http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > Yahoo! Groups Sponsor
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> >
> >
> >[Non-text portions of this message have been removed]
> >
>
> _________________________________________________________________
> Trouvez l'âme soeur sur MSN Rencontres ! http://g.msn.fr/FR1000/9551
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

John Berendt · Post by **John Berendt** » Tue Jul 15, 2003 6:41 am

'Robert,

I was not able to find the draglink with the repair on it but, I did find on
that has no repairs and just needs some bushing installed. I will put it in
the mail in the next two days. Cost is $45.00 that includes the shipping I
have not heard from you on your membership renewal the last and final
renewal notice went out this week Your correct address is still 4326 Hwy 90
East, Uvalde, TX 78801.

John Berendt

----- Original Message -----
From: "robert hensarling"
To:
Sent: Sunday, June 29, 2003 9:00 PM
Subject: Re: [fairchildclub] drag link

>
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, June 29, 2003 8:30 PM
> Subject: Re: [fairchildclub] drag link
>
> Hi John, many many thanks for looking for a drag link. Yes, I have
Herb's book, and have tried the nylon washer. So far, I've not have any
luck with any of the repairs, but I'm not giving up. Let me know what you
might want for the drag link and I'll get a check off to you.
> Thanks!
> Robert Hensarling
>
>
> Bob,
>
> I may have a spare drag link that has a good repair on it. I will go to
the
> hanger and take a look this week. Do you have a copy of herb pucket's
book,
> in there is a good chapter on tail wheel shimmy. I f you do not let me
know
> and I will copy the pages and send them to you.
>
> John Berendt
> ----- Original Message -----
> From: "robert hensarling"
> To:
> Sent: Friday, June 27, 2003 8:31 AM
> Subject: [fairchildclub] drag link
>
>
> > Looking for a good drag link for my PT-19. Mine appears to have a
small
> fracture in the web. May be a result of the shimmying ( $1,100 in
tailwheel
> "overhauls" and still climbing )
> > Someday will get that darn problem solved. Have quite flying my
airplane
> because of this. 1.7 TT in one year, not good.
> > Please email me at rhrocker@hilconet.com
> > Robert
> > Uvalde, TX
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

robert hensarling · Post by **robert hensarling** » Tue Jul 15, 2003 8:48 am

'

----- Original Message -----
From: John Berendt
To: fairchildclub@yahoogroups.com
Sent: Tuesday, July 15, 2003 7:48 AM
Subject: Re: [fairchildclub] drag link

Thanks John! I appreciate the drag link. Sorry on being late on renewing, been moving the last two months and let it slip. Will tend to it and the link cost today!
Robert (Address is 4326 East. Main, Uvalde, Tx, 78801)

Robert,

I was not able to find the draglink with the repair on it but, I did find on
that has no repairs and just needs some bushing installed. I will put it in
the mail in the next two days. Cost is $45.00 that includes the shipping I
have not heard from you on your membership renewal the last and final
renewal notice went out this week Your correct address is still 4326 Hwy 90
East, Uvalde, TX 78801.

John Berendt
----- Original Message -----
From: "robert hensarling"
To:
Sent: Sunday, June 29, 2003 9:00 PM
Subject: Re: [fairchildclub] drag link

>
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, June 29, 2003 8:30 PM
> Subject: Re: [fairchildclub] drag link
>
> Hi John, many many thanks for looking for a drag link. Yes, I have
Herb's book, and have tried the nylon washer. So far, I've not have any
luck with any of the repairs, but I'm not giving up. Let me know what you
might want for the drag link and I'll get a check off to you.
> Thanks!
> Robert Hensarling
>
>
> Bob,
>
> I may have a spare drag link that has a good repair on it. I will go to
the
> hanger and take a look this week. Do you have a copy of herb pucket's
book,
> in there is a good chapter on tail wheel shimmy. I f you do not let me
know
> and I will copy the pages and send them to you.
>
> John Berendt
> ----- Original Message -----
> From: "robert hensarling"
> To:
> Sent: Friday, June 27, 2003 8:31 AM
> Subject: [fairchildclub] drag link
>
>
> > Looking for a good drag link for my PT-19. Mine appears to have a
small
> fracture in the web. May be a result of the shimmying ( $1,100 in
tailwheel
> "overhauls" and still climbing )
> > Someday will get that darn problem solved. Have quite flying my
airplane
> because of this. 1.7 TT in one year, not good.
> > Please email me at rhrocker@hilconet.com
> > Robert
> > Uvalde, TX
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Yahoo! Groups Sponsor
ADVERTISEMENT

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

john casner · Post by **john casner** » Tue Jul 15, 2003 10:38 am

'Robert, If you are talking about fairchild club dues, could you check on my
account? I don't remember getting any renewal notices. John Casner

----- Original Message -----
From: "robert hensarling"
To:
Sent: Tuesday, July 15, 2003 9:50 AM
Subject: Re: [fairchildclub] drag link

>
> ----- Original Message -----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Sent: Tuesday, July 15, 2003 7:48 AM
> Subject: Re: [fairchildclub] drag link
>
> Thanks John! I appreciate the drag link. Sorry on being late on
renewing, been moving the last two months and let it slip. Will tend to it
and the link cost today!
> Robert (Address is 4326 East. Main, Uvalde, Tx, 78801)
>
>
> Robert,
>
> I was not able to find the draglink with the repair on it but, I did
find on
> that has no repairs and just needs some bushing installed. I will put it
in
> the mail in the next two days. Cost is $45.00 that includes the
shipping I
> have not heard from you on your membership renewal the last and final
> renewal notice went out this week Your correct address is still 4326 Hwy
90
> East, Uvalde, TX 78801.
>
> John Berendt
> ----- Original Message -----
> From: "robert hensarling"
> To:
> Sent: Sunday, June 29, 2003 9:00 PM
> Subject: Re: [fairchildclub] drag link
>
>
> >
> > ----- Original Message -----
> > From: John Berendt
> > To: fairchildclub@yahoogroups.com
> > Sent: Sunday, June 29, 2003 8:30 PM
> > Subject: Re: [fairchildclub] drag link
> >
> > Hi John, many many thanks for looking for a drag link. Yes, I have
> Herb's book, and have tried the nylon washer. So far, I've not have any
> luck with any of the repairs, but I'm not giving up. Let me know what
you
> might want for the drag link and I'll get a check off to you.
> > Thanks!
> > Robert Hensarling
> >
> >
> > Bob,
> >
> > I may have a spare drag link that has a good repair on it. I will
go to
> the
> > hanger and take a look this week. Do you have a copy of herb
pucket's
> book,
> > in there is a good chapter on tail wheel shimmy. I f you do not let
me
> know
> > and I will copy the pages and send them to you.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "robert hensarling"
> > To:
> > Sent: Friday, June 27, 2003 8:31 AM
> > Subject: [fairchildclub] drag link
> >
> >
> > > Looking for a good drag link for my PT-19. Mine appears to have a
> small
> > fracture in the web. May be a result of the shimmying ( $1,100 in
> tailwheel
> > "overhauls" and still climbing )
> > > Someday will get that darn problem solved. Have quite flying my
> airplane
> > because of this. 1.7 TT in one year, not good.
> > > Please email me at rhrocker@hilconet.com
> > > Robert
> > > Uvalde, TX
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > Yahoo! Groups Sponsor
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

John Berendt · Post by **John Berendt** » Wed Jul 16, 2003 7:25 am

'John.

you have not received any renewal notice as you membership comes up with the
next issue of the newsletter. you will get a renewal notice with the next
issue.

John Berendt
Fairchild Club

----- Original Message -----
From: "john casner"
To:
Sent: Tuesday, July 15, 2003 11:38 AM
Subject: Re: [fairchildclub] drag link

> Robert, If you are talking about fairchild club dues, could you check on
my
> account? I don't remember getting any renewal notices. John Casner
> ----- Original Message -----
> From: "robert hensarling"
> To:
> Sent: Tuesday, July 15, 2003 9:50 AM
> Subject: Re: [fairchildclub] drag link
>
>
> >
> > ----- Original Message -----
> > From: John Berendt
> > To: fairchildclub@yahoogroups.com
> > Sent: Tuesday, July 15, 2003 7:48 AM
> > Subject: Re: [fairchildclub] drag link
> >
> > Thanks John! I appreciate the drag link. Sorry on being late on
> renewing, been moving the last two months and let it slip. Will tend to
it
> and the link cost today!
> > Robert (Address is 4326 East. Main, Uvalde, Tx, 78801)
> >
> >
> > Robert,
> >
> > I was not able to find the draglink with the repair on it but, I did
> find on
> > that has no repairs and just needs some bushing installed. I will put
it
> in
> > the mail in the next two days. Cost is $45.00 that includes the
> shipping I
> > have not heard from you on your membership renewal the last and final
> > renewal notice went out this week Your correct address is still 4326
Hwy
> 90
> > East, Uvalde, TX 78801.
> >
> > John Berendt
> > ----- Original Message -----
> > From: "robert hensarling"
> > To:
> > Sent: Sunday, June 29, 2003 9:00 PM
> > Subject: Re: [fairchildclub] drag link
> >
> >
> > >
> > > ----- Original Message -----
> > > From: John Berendt
> > > To: fairchildclub@yahoogroups.com
> > > Sent: Sunday, June 29, 2003 8:30 PM
> > > Subject: Re: [fairchildclub] drag link
> > >
> > > Hi John, many many thanks for looking for a drag link. Yes, I
have
> > Herb's book, and have tried the nylon washer. So far, I've not have
any
> > luck with any of the repairs, but I'm not giving up. Let me know what
> you
> > might want for the drag link and I'll get a check off to you.
> > > Thanks!
> > > Robert Hensarling
> > >
> > >
> > > Bob,
> > >
> > > I may have a spare drag link that has a good repair on it. I will
> go to
> > the
> > > hanger and take a look this week. Do you have a copy of herb
> pucket's
> > book,
> > > in there is a good chapter on tail wheel shimmy. I f you do not
let
> me
> > know
> > > and I will copy the pages and send them to you.
> > >
> > > John Berendt
> > > ----- Original Message -----
> > > From: "robert hensarling"
> > > To:
> > > Sent: Friday, June 27, 2003 8:31 AM
> > > Subject: [fairchildclub] drag link
> > >
> > >
> > > > Looking for a good drag link for my PT-19. Mine appears to have
a
> > small
> > > fracture in the web. May be a result of the shimmying ( $1,100 in
> > tailwheel
> > > "overhauls" and still climbing )
> > > > Someday will get that darn problem solved. Have quite flying my
> > airplane
> > > because of this. 1.7 TT in one year, not good.
> > > > Please email me at rhrocker@hilconet.com
> > > > Robert
> > > > Uvalde, TX
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > > To unsubscribe from this group, send an email to:
> > > > fairchildclub-unsubscribe@yahoogroups.com
> > > >
> > > >
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > > Yahoo! Groups Sponsor
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'