Re: Fairchild FC2 info / intro

[David Stroud]

'Giday, Gents..by way of an intro, I'm a Christavia 2 place flyer in Ottawa, Ontario, Canada with an itch
to build again. My interest is the older Fairchild FC2 and probably will power it with one of the Housai
radials that are becoming increasingly available today at very reasonable prices.
Does anyone on this list have any ideas for a source of technical drawings, blueprints etc of this
particular Fairchild model or is anyone aware of an FC2 carcass that may exist? The only drawings
I have been able to get my hands on are the 3 view drawings by the Historical Aviation Album people
in California. Thanks..

Dave Stroud
Ottawa, Canada'

[John Berendt]

'Dave,

I do not know of a source for the FC-2 drawings. You could try the National
Air and space museum in Washington D.C. they may have some also there is a
museum in Quebec City that is building a non flying replica of a FC-2 you
may want o contact them. I do not know of a FC-2 carcass any where. I know
of two being rebuilt.
John Berendt

----- Original Message -----
From: "David Stroud"
To:
Sent: Monday, June 09, 2003 8:14 AM
Subject: [fairchildclub] Fairchild FC2 info / intro


> Giday, Gents..by way of an intro, I'm a Christavia 2 place flyer in
Ottawa, Ontario, Canada with an itch
> to build again. My interest is the older Fairchild FC2 and probably will
power it with one of the Housai
> radials that are becoming increasingly available today at very reasonable
prices.
> Does anyone on this list have any ideas for a source of technical
drawings, blueprints etc of this
> particular Fairchild model or is anyone aware of an FC2 carcass that may
exist? The only drawings
> I have been able to get my hands on are the 3 view drawings by the
Historical Aviation Album people
> in California. Thanks..
>
> Dave Stroud
> Ottawa, Canada
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

[Bob Haas]

'Dave, you can contact Bob Taylor of the Antique Airplane Assn at
Ottumwa Iowa 5201. He received a large group of "Surplus drawings" from
NASM when they were house cleaning back in 1980. Bob Haas

-----Original Message-----
From: John Berendt [mailto:fchld@rconnect.com]
Sent: Tuesday, June 10, 2003 10:46 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Fairchild FC2 info / intro


Dave,

I do not know of a source for the FC-2 drawings. You could try the
National
Air and space museum in Washington D.C. they may have some also there is
a
museum in Quebec City that is building a non flying replica of a FC-2
you
may want o contact them. I do not know of a FC-2 carcass any where. I
know
of two being rebuilt.
John Berendt

----- Original Message -----
From: "David Stroud"
To:
Sent: Monday, June 09, 2003 8:14 AM
Subject: [fairchildclub] Fairchild FC2 info / intro


> Giday, Gents..by way of an intro, I'm a Christavia 2 place flyer in
Ottawa, Ontario, Canada with an itch
> to build again. My interest is the older Fairchild FC2 and probably
will
power it with one of the Housai
> radials that are becoming increasingly available today at very
reasonable
prices.
> Does anyone on this list have any ideas for a source of technical
drawings, blueprints etc of this
> particular Fairchild model or is anyone aware of an FC2 carcass that
may
exist? The only drawings
> I have been able to get my hands on are the 3 view drawings by the
Historical Aviation Album people
> in California. Thanks..
>
> Dave Stroud
> Ottawa, Canada
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>



To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

'