Re: Fairchild Parts Point of Contact

Jamie S. Treat · Post by **Jamie S. Treat** » Mon Apr 07, 2003 9:06 pm

'Bob Haas and I met quite a few interested Fairchild people at Sun-N-
Fun this past week. One person, we believe his name is Jim Hayes
mentioned he had Fairchild parts. We have lost the Business card.
There is a fellow Fairchild owner in Fla. that is in need of the F-
24 knuckle joints. One of his has a known crack. If Jim Hayes (we
think that was his name) is reading, drop me a note. You mentioned
you are a Fairchild Yahoo member.

Or if any one has the Universal Gear joints, drop me a note.

Jamie S. Treat
303-648-0130
JamieTreat@direcway.com'

Cy Galley · Post by **Cy Galley** » Mon Apr 07, 2003 9:12 pm

'Jim Haynes
21 Sunset Lane
Bushnell, IL 61442
309-772-2067

----- Original Message -----
From: Jamie S. Treat
To: fairchildclub@yahoogroups.com
Sent: Monday, April 07, 2003 10:06 PM
Subject: [fairchildclub] Fairchild Parts Point of Contact

Bob Haas and I met quite a few interested Fairchild people at Sun-N-
Fun this past week. One person, we believe his name is Jim Hayes
mentioned he had Fairchild parts. We have lost the Business card.
There is a fellow Fairchild owner in Fla. that is in need of the F-
24 knuckle joints. One of his has a known crack. If Jim Hayes (we
think that was his name) is reading, drop me a note. You mentioned
you are a Fairchild Yahoo member.

Or if any one has the Universal Gear joints, drop me a note.

Jamie S. Treat
303-648-0130
JamieTreat@direcway.com

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

Jamie Treat · Post by **Jamie Treat** » Mon Apr 07, 2003 9:48 pm

'Thank you!

J. S. Treat

----- Original Message -----
From: Cy Galley
To: fairchildclub@yahoogroups.com ; Haynes, Jim
Sent: Monday, April 07, 2003 9:14 PM
Subject: Re: [fairchildclub] Fairchild Parts Point of Contact

Jim Haynes
21 Sunset Lane
Bushnell, IL 61442
309-772-2067

----- Original Message -----
From: Jamie S. Treat
To: fairchildclub@yahoogroups.com
Sent: Monday, April 07, 2003 10:06 PM
Subject: [fairchildclub] Fairchild Parts Point of Contact

Bob Haas and I met quite a few interested Fairchild people at Sun-N-
Fun this past week. One person, we believe his name is Jim Hayes
mentioned he had Fairchild parts. We have lost the Business card.
There is a fellow Fairchild owner in Fla. that is in need of the F-
24 knuckle joints. One of his has a known crack. If Jim Hayes (we
think that was his name) is reading, drop me a note. You mentioned
you are a Fairchild Yahoo member.

Or if any one has the Universal Gear joints, drop me a note.

Jamie S. Treat
303-648-0130
JamieTreat@direcway.com

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

jim Chybicki · Post by **jim Chybicki** » Tue Apr 08, 2003 6:51 am

'Which Knuckle shaft are you talking about???

--- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
wrote:

> Bob Haas and I met quite a few interested Fairchild people at Sun-N-
> Fun this past week. One person, we believe his name is Jim Hayes
> mentioned he had Fairchild parts. We have lost the Business card.
> There is a fellow Fairchild owner in Fla. that is in need of the F-
> 24 knuckle joints. One of his has a known crack. If Jim Hayes (we
> think that was his name) is reading, drop me a note. You mentioned
> you are a Fairchild Yahoo member.
>
> Or if any one has the Universal Gear joints, drop me a note.
>
> Jamie S. Treat
> 303-648-0130
> JamieTreat@d...

'

Jamie S. Treat · Post by **Jamie S. Treat** » Tue Apr 08, 2003 8:20 am

'Jim,

The upper and lower Main Landing Gear Universal Joint. Drawing number
3330 and 3328. This 24W46 has the Cont 220 which as you know is much
heavier than the Ranger and Warner. So the Universals have taken to
cracking under the heavier loads.

Jamie

--- In fairchildclub@yahoogroups.com, "jim Chybicki"
wrote:

> Which Knuckle shaft are you talking about???
>
> --- In fairchildclub@yahoogroups.com, "Jamie S. Treat"
> wrote:
> > Bob Haas and I met quite a few interested Fairchild people at Sun-

N-

> > Fun this past week. One person, we believe his name is Jim Hayes
> > mentioned he had Fairchild parts. We have lost the Business card.
> > There is a fellow Fairchild owner in Fla. that is in need of the

F-

> > 24 knuckle joints. One of his has a known crack. If Jim Hayes

(we

> > think that was his name) is reading, drop me a note. You

mentioned

> > you are a Fairchild Yahoo member.
> >
> > Or if any one has the Universal Gear joints, drop me a note.
> >
> > Jamie S. Treat
> > 303-648-0130
> > JamieTreat@d...

'

John Berendt · Post by **John Berendt** » Tue Apr 08, 2003 8:26 am

'Jamie,

There is a service bulletin or an AD that tells you how to repair the crack
in a universal . I have been in contact with the guy in Florida
John Berendt

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Monday, April 07, 2003 10:06 PM
Subject: [fairchildclub] Fairchild Parts Point of Contact

> Bob Haas and I met quite a few interested Fairchild people at Sun-N-
> Fun this past week. One person, we believe his name is Jim Hayes
> mentioned he had Fairchild parts. We have lost the Business card.
> There is a fellow Fairchild owner in Fla. that is in need of the F-
> 24 knuckle joints. One of his has a known crack. If Jim Hayes (we
> think that was his name) is reading, drop me a note. You mentioned
> you are a Fairchild Yahoo member.
>
> Or if any one has the Universal Gear joints, drop me a note.
>
> Jamie S. Treat
> 303-648-0130
> JamieTreat@direcway.com
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Jamie S. Treat · Post by **Jamie S. Treat** » Tue Apr 08, 2003 12:17 pm

'Thanks John,

Don't have that SB. If you are talking SB41-11 and companion AD note
46-21-01. And of course the SB does not talk 24R46 or 24W46, but the
AD applies to all. There is no data for repair only inspection and
replacement with new unit. If you have another SB that talks repair,
send one along when you get a chance. If memory serves me correctly,
Karl Sanger when thru this old vs new universal fittings P/N 3330 and
3328 last year. I believe Karl had some new ones made or found a
newer set.

Any repair to those fittings would be questionable due to the stress
and the additional weight caused by the heavy engine.

Jamie S. Treat

--- In fairchildclub@yahoogroups.com, "John Berendt"
wrote:

> Jamie,
>
> There is a service bulletin or an AD that tells you how to repair

the crack

> in a universal . I have been in contact with the guy in Florida
> John Berendt
> ----- Original Message -----
> From: "Jamie S. Treat"
> To:
> Sent: Monday, April 07, 2003 10:06 PM
> Subject: [fairchildclub] Fairchild Parts Point of Contact
>
>
> > Bob Haas and I met quite a few interested Fairchild people at Sun-

N-

> > Fun this past week. One person, we believe his name is Jim Hayes
> > mentioned he had Fairchild parts. We have lost the Business card.
> > There is a fellow Fairchild owner in Fla. that is in need of the

F-

> > 24 knuckle joints. One of his has a known crack. If Jim Hayes (we
> > think that was his name) is reading, drop me a note. You mentioned
> > you are a Fairchild Yahoo member.
> >
> > Or if any one has the Universal Gear joints, drop me a note.
> >
> > Jamie S. Treat
> > 303-648-0130
> > JamieTreat@d...
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >

'

harry hayman · Post by **harry hayman** » Tue Apr 08, 2003 5:49 pm

'Guy's,

I have some universal joint' as well as some Intake
valves,exhaust valves,generator,master cylinder,
serviceable F24 rudder,Rudder pedal's,control
stick's,ect.I am in the Jacksonville Fla. area would
prefer to sell all in one lot.Give me a couple of
week's to work up a price,if any one is intrested.
or fly in (Haller Airpark 7FL4)and make me a offer.
Harry
Would prefer a phone call for info.Thanx 904 284 4276

--- "Jamie S. Treat" wrote:

> Thanks John,
>
> Don't have that SB. If you are talking SB41-11 and
> companion AD note
> 46-21-01. And of course the SB does not talk 24R46
> or 24W46, but the
> AD applies to all. There is no data for repair only
> inspection and
> replacement with new unit. If you have another SB
> that talks repair,
> send one along when you get a chance. If memory
> serves me correctly,
> Karl Sanger when thru this old vs new universal
> fittings P/N 3330 and
> 3328 last year. I believe Karl had some new ones
> made or found a
> newer set.
>
> Any repair to those fittings would be questionable
> due to the stress
> and the additional weight caused by the heavy
> engine.
>
> Jamie S. Treat
>
> --- In fairchildclub@yahoogroups.com, "John Berendt"
>
> wrote:
> > Jamie,
> >
> > There is a service bulletin or an AD that tells
> you how to repair
> the crack
> > in a universal . I have been in contact with the
> guy in Florida
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Monday, April 07, 2003 10:06 PM
> > Subject: [fairchildclub] Fairchild Parts Point of
> Contact
> >
> >
> > > Bob Haas and I met quite a few interested
> Fairchild people at Sun-
> N-
> > > Fun this past week. One person, we believe his
> name is Jim Hayes
> > > mentioned he had Fairchild parts. We have lost
> the Business card.
> > > There is a fellow Fairchild owner in Fla. that
> is in need of the
> F-
> > > 24 knuckle joints. One of his has a known
> crack. If Jim Hayes (we
> > > think that was his name) is reading, drop me a
> note. You mentioned
> > > you are a Fairchild Yahoo member.
> > >
> > > Or if any one has the Universal Gear joints,
> drop me a note.
> > >
> > > Jamie S. Treat
> > > 303-648-0130
> > > JamieTreat@d...
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email
> to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>

=====
Harry Hayman
Phone 904-284-4276
Fax 904-284-3869

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com'

John Berendt · Post by **John Berendt** » Wed Apr 09, 2003 6:59 am

'Jamie,

The guy in Florida did not tell me the ship had a220. cont. The ad and
service bulletin I remember was really on the gear leg
my mistake. I have a home made universal fitting that would be easy to make
all it would take is a small vertical mill I did a article on it last year
or in 2000 it was made out of bar stock. The cost of making the original
one is out of the question. I wonder if Solberg has any, Joe or Mike denest
should be able to find out

John
t

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Tuesday, April 08, 2003 1:17 PM
Subject: [fairchildclub] Re: Fairchild Parts Point of Contact

> Thanks John,
>
> Don't have that SB. If you are talking SB41-11 and companion AD note
> 46-21-01. And of course the SB does not talk 24R46 or 24W46, but the
> AD applies to all. There is no data for repair only inspection and
> replacement with new unit. If you have another SB that talks repair,
> send one along when you get a chance. If memory serves me correctly,
> Karl Sanger when thru this old vs new universal fittings P/N 3330 and
> 3328 last year. I believe Karl had some new ones made or found a
> newer set.
>
> Any repair to those fittings would be questionable due to the stress
> and the additional weight caused by the heavy engine.
>
> Jamie S. Treat
>
> --- In fairchildclub@yahoogroups.com, "John Berendt"
> wrote:
> > Jamie,
> >
> > There is a service bulletin or an AD that tells you how to repair
> the crack
> > in a universal . I have been in contact with the guy in Florida
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Monday, April 07, 2003 10:06 PM
> > Subject: [fairchildclub] Fairchild Parts Point of Contact
> >
> >
> > > Bob Haas and I met quite a few interested Fairchild people at Sun-
> N-
> > > Fun this past week. One person, we believe his name is Jim Hayes
> > > mentioned he had Fairchild parts. We have lost the Business card.
> > > There is a fellow Fairchild owner in Fla. that is in need of the
> F-
> > > 24 knuckle joints. One of his has a known crack. If Jim Hayes (we
> > > think that was his name) is reading, drop me a note. You mentioned
> > > you are a Fairchild Yahoo member.
> > >
> > > Or if any one has the Universal Gear joints, drop me a note.
> > >
> > > Jamie S. Treat
> > > 303-648-0130
> > > JamieTreat@d...
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

WILLIAM SPRIGGS · Post by **WILLIAM SPRIGGS** » Thu Apr 10, 2003 9:43 am

'John: Concerning the gear leg u-joints, I had a bunch made up out of 4130 chromemoly. They are the rough castings that are double the thickness of the steel. These are available if anyone needs them. They would have to be finished with bushings installed. Bill Spriggs

----- Original Message -----
From: John Berendt
Sent: Wednesday, April 09, 2003 6:03 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Re: Fairchild Parts Point of Contact

Jamie,

The guy in Florida did not tell me the ship had a220. cont. The ad and
service bulletin I remember was really on the gear leg
my mistake. I have a home made universal fitting that would be easy to make
all it would take is a small vertical mill I did a article on it last year
or in 2000 it was made out of bar stock. The cost of making the original
one is out of the question. I wonder if Solberg has any, Joe or Mike denest
should be able to find out

John
t
----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Tuesday, April 08, 2003 1:17 PM
Subject: [fairchildclub] Re: Fairchild Parts Point of Contact

> Thanks John,
>
> Don't have that SB. If you are talking SB41-11 and companion AD note
> 46-21-01. And of course the SB does not talk 24R46 or 24W46, but the
> AD applies to all. There is no data for repair only inspection and
> replacement with new unit. If you have another SB that talks repair,
> send one along when you get a chance. If memory serves me correctly,
> Karl Sanger when thru this old vs new universal fittings P/N 3330 and
> 3328 last year. I believe Karl had some new ones made or found a
> newer set.
>
> Any repair to those fittings would be questionable due to the stress
> and the additional weight caused by the heavy engine.
>
> Jamie S. Treat
>
> --- In fairchildclub@yahoogroups.com, "John Berendt"
> wrote:
> > Jamie,
> >
> > There is a service bulletin or an AD that tells you how to repair
> the crack
> > in a universal . I have been in contact with the guy in Florida
> > John Berendt
> > ----- Original Message -----
> > From: "Jamie S. Treat"
> > To:
> > Sent: Monday, April 07, 2003 10:06 PM
> > Subject: [fairchildclub] Fairchild Parts Point of Contact
> >
> >
> > > Bob Haas and I met quite a few interested Fairchild people at Sun-
> N-
> > > Fun this past week. One person, we believe his name is Jim Hayes
> > > mentioned he had Fairchild parts. We have lost the Business card.
> > > There is a fellow Fairchild owner in Fla. that is in need of the
> F-
> > > 24 knuckle joints. One of his has a known crack. If Jim Hayes (we
> > > think that was his name) is reading, drop me a note. You mentioned
> > > you are a Fairchild Yahoo member.
> > >
> > > Or if any one has the Universal Gear joints, drop me a note.
> > >
> > > Jamie S. Treat
> > > 303-648-0130
> > > JamieTreat@d...
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]

'