Re: PT wheel change

Charles Mueller · Post by **Charles Mueller** » Mon Apr 07, 2003 10:04 am

'I've been ready to change over to Cleveland brakes on my PT-26
project, but find myself hesitating whenever I look at the Cleveland
wheel rims supplied with the brake conversion kit. Compared to the
original PT wheels they look rather "modern" and I'm wondering how
they would appear when this rebuild project is finished.

I may be opening a can of worms here - but would like to hear of any
comments group members may have. If there are any photos around of PTs
with the Cleveland wheels that would be really appreciated.

Charles Mueller'

Jamie Treat · Post by **Jamie Treat** » Mon Apr 07, 2003 5:11 pm

'Charles,

Give Joe Denest a call, He will tell you they look like socks on a rooster. He takes the Cleveland off and re-installs the Hayes. He stacks them up in the corner.

Jamie S. Treat

----- Original Message -----
From: Charles Mueller
To: fairchildclub@yahoogroups.com
Sent: Monday, April 07, 2003 10:03 AM
Subject: [fairchildclub] PT wheel change

I've been ready to change over to Cleveland brakes on my PT-26
project, but find myself hesitating whenever I look at the Cleveland
wheel rims supplied with the brake conversion kit. Compared to the
original PT wheels they look rather "modern" and I'm wondering how
they would appear when this rebuild project is finished.

I may be opening a can of worms here - but would like to hear of any
comments group members may have. If there are any photos around of PTs
with the Cleveland wheels that would be really appreciated.

Charles Mueller

Yahoo! Groups Sponsor

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

'

John Berendt · Post by **John Berendt** » Tue Apr 08, 2003 8:18 am

'Charles,

Contact Roger Miller at(901) 853-3963. Roger did the first Cleveland
Conversion on a PT-26 it looks very good
I am sure Roger would send you some photos if you asked him.

John Berendt

----- Original Message -----
From: "Charles Mueller"
To:
Sent: Monday, April 07, 2003 11:03 AM
Subject: [fairchildclub] PT wheel change

> I've been ready to change over to Cleveland brakes on my PT-26
> project, but find myself hesitating whenever I look at the Cleveland
> wheel rims supplied with the brake conversion kit. Compared to the
> original PT wheels they look rather "modern" and I'm wondering how
> they would appear when this rebuild project is finished.
>
> I may be opening a can of worms here - but would like to hear of any
> comments group members may have. If there are any photos around of PTs
> with the Cleveland wheels that would be really appreciated.
>
> Charles Mueller
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Airy-Hugues Millet · Post by **Airy-Hugues Millet** » Tue Apr 08, 2003 12:30 pm

'we did had the same hesitations, but after overhaule of our Hayes with parts
from fresnoairparts, our F24 is braking very well when needed, and is still
looking as original as she is a real WWII veteran!!

Airy-H.MILLET
Nostalg'Air E&L
Chartres-France

>From: "Jamie Treat"
>Reply-To: fairchildclub@yahoogroups.com
>To:
>Subject: Re: [fairchildclub] PT wheel change
>Date: Mon, 7 Apr 2003 16:39:22 -0600
>
>Charles,
>
>Give Joe Denest a call, He will tell you they look like socks on a rooster.
>He takes the Cleveland off and re-installs the Hayes. He stacks them up in
>the corner.
>
>Jamie S. Treat
> ----- Original Message -----
> From: Charles Mueller
> To: fairchildclub@yahoogroups.com
> Sent: Monday, April 07, 2003 10:03 AM
> Subject: [fairchildclub] PT wheel change
>
>
> I've been ready to change over to Cleveland brakes on my PT-26
> project, but find myself hesitating whenever I look at the Cleveland
> wheel rims supplied with the brake conversion kit. Compared to the
> original PT wheels they look rather "modern" and I'm wondering how
> they would appear when this rebuild project is finished.
>
> I may be opening a can of worms here - but would like to hear of any
> comments group members may have. If there are any photos around of PTs
> with the Cleveland wheels that would be really appreciated.
>
> Charles Mueller
>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>[Non-text portions of this message have been removed]
>

_________________________________________________________________
Pro ou perso, toutes les adresses et numéros de tél que vous cherchez
http://g.msn.fr/FR1000/9491'

KD Kinne · Post by **KD Kinne** » Mon May 05, 2003 9:56 pm

'John! Do you know of anyone that would have the later type stearable tail
strut that i could adopt to my 1934 c8c? Wood work just about completed and
i would like to have something other than the free wheeling tail strut.
Thanks Ken Kinne Kdkinne@bend net.com
-----Original Message-----
From: John Berendt
To: fairchildclub@yahoogroups.com
Date: Tuesday, April 08, 2003 7:19 AM
Subject: Re: [fairchildclub] PT wheel change

>Charles,
>
>Contact Roger Miller at(901) 853-3963. Roger did the first Cleveland
>Conversion on a PT-26 it looks very good
>I am sure Roger would send you some photos if you asked him.
>
>John Berendt
>----- Original Message -----
>From: "Charles Mueller"
>To:
>Sent: Monday, April 07, 2003 11:03 AM
>Subject: [fairchildclub] PT wheel change
>
>
>> I've been ready to change over to Cleveland brakes on my PT-26
>> project, but find myself hesitating whenever I look at the Cleveland
>> wheel rims supplied with the brake conversion kit. Compared to the
>> original PT wheels they look rather "modern" and I'm wondering how
>> they would appear when this rebuild project is finished.
>>
>> I may be opening a can of worms here - but would like to hear of any
>> comments group members may have. If there are any photos around of PTs
>> with the Cleveland wheels that would be really appreciated.
>>
>> Charles Mueller
>>
>>
>>
>> To unsubscribe from this group, send an email to:
>> fairchildclub-unsubscribe@yahoogroups.com
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>
>
>
>To unsubscribe from this group, send an email to:
>fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

John Berendt · Post by **John Berendt** » Tue May 06, 2003 9:10 am

'Ken,

right now I do not know of any one who has a strut. You could contact Roger
Mooney at (973-663-0925. He may have a spare he is trying to sell out the
F24 parts that he has. you will have to get also the idler assembly that
changes the rudder cables to the tail wheel Contact Bob Waldron on this he
did this on a F24K his e-mail is rjwaldron@mmmpcc.org.

John Berendt

----- Original Message -----
From: "KD Kinne"
To:
Sent: Monday, May 05, 2003 11:19 PM
Subject: Re: [fairchildclub] PT wheel change

> John! Do you know of anyone that would have the later type stearable
tail
> strut that i could adopt to my 1934 c8c? Wood work just about completed
and
> i would like to have something other than the free wheeling tail strut.
> Thanks Ken Kinne Kdkinne@bend net.com
> -----Original Message-----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Date: Tuesday, April 08, 2003 7:19 AM
> Subject: Re: [fairchildclub] PT wheel change
>
>
> >Charles,
> >
> >Contact Roger Miller at(901) 853-3963. Roger did the first Cleveland
> >Conversion on a PT-26 it looks very good
> >I am sure Roger would send you some photos if you asked him.
> >
> >John Berendt
> >----- Original Message -----
> >From: "Charles Mueller"
> >To:
> >Sent: Monday, April 07, 2003 11:03 AM
> >Subject: [fairchildclub] PT wheel change
> >
> >
> >> I've been ready to change over to Cleveland brakes on my PT-26
> >> project, but find myself hesitating whenever I look at the Cleveland
> >> wheel rims supplied with the brake conversion kit. Compared to the
> >> original PT wheels they look rather "modern" and I'm wondering how
> >> they would appear when this rebuild project is finished.
> >>
> >> I may be opening a can of worms here - but would like to hear of any
> >> comments group members may have. If there are any photos around of PTs
> >> with the Cleveland wheels that would be really appreciated.
> >>
> >> Charles Mueller
> >>
> >>
> >>
> >> To unsubscribe from this group, send an email to:
> >> fairchildclub-unsubscribe@yahoogroups.com
> >>
> >>
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >
> >
> >
> >To unsubscribe from this group, send an email to:
> >fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

WALTER ALBERT · Post by **WALTER ALBERT** » Tue May 06, 2003 8:07 pm

'I have a strut but lack the fork. walt

----- Original Message -----
From: "KD Kinne"
To:
Sent: Tuesday, May 06, 2003 12:19 AM
Subject: Re: [fairchildclub] PT wheel change

> John! Do you know of anyone that would have the later type stearable
tail
> strut that i could adopt to my 1934 c8c? Wood work just about completed
and
> i would like to have something other than the free wheeling tail strut.
> Thanks Ken Kinne Kdkinne@bend net.com
> -----Original Message-----
> From: John Berendt
> To: fairchildclub@yahoogroups.com
> Date: Tuesday, April 08, 2003 7:19 AM
> Subject: Re: [fairchildclub] PT wheel change
>
>
> >Charles,
> >
> >Contact Roger Miller at(901) 853-3963. Roger did the first Cleveland
> >Conversion on a PT-26 it looks very good
> >I am sure Roger would send you some photos if you asked him.
> >
> >John Berendt
> >----- Original Message -----
> >From: "Charles Mueller"
> >To:
> >Sent: Monday, April 07, 2003 11:03 AM
> >Subject: [fairchildclub] PT wheel change
> >
> >
> >> I've been ready to change over to Cleveland brakes on my PT-26
> >> project, but find myself hesitating whenever I look at the Cleveland
> >> wheel rims supplied with the brake conversion kit. Compared to the
> >> original PT wheels they look rather "modern" and I'm wondering how
> >> they would appear when this rebuild project is finished.
> >>
> >> I may be opening a can of worms here - but would like to hear of any
> >> comments group members may have. If there are any photos around of PTs
> >> with the Cleveland wheels that would be really appreciated.
> >>
> >> Charles Mueller
> >>
> >>
> >>
> >> To unsubscribe from this group, send an email to:
> >> fairchildclub-unsubscribe@yahoogroups.com
> >>
> >>
> >>
> >> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >>
> >>
> >
> >
> >
> >To unsubscribe from this group, send an email to:
> >fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Buell Powell · Post by **Buell Powell** » Sun Jun 01, 2003 11:12 pm

'Walt,
I am getting a tailwheel fork form a PT19.Do you still have the
strut? If you could send me your e-mail address I have some other items I
would like to check with you about. I tried to call but haven't been able to
catch you at home.
Thanks,
Buell

----- Original Message -----
From: "WALTER ALBERT"
To:
Sent: Tuesday, May 06, 2003 9:07 PM
Subject: Re: [fairchildclub] PT wheel change

> I have a strut but lack the fork. walt
> ----- Original Message -----
> From: "KD Kinne"
> To:
> Sent: Tuesday, May 06, 2003 12:19 AM
> Subject: Re: [fairchildclub] PT wheel change
>
>
> > John! Do you know of anyone that would have the later type stearable
> tail
> > strut that i could adopt to my 1934 c8c? Wood work just about completed
> and
> > i would like to have something other than the free wheeling tail strut.
> > Thanks Ken Kinne Kdkinne@bend net.com
> > -----Original Message-----
> > From: John Berendt
> > To: fairchildclub@yahoogroups.com
> > Date: Tuesday, April 08, 2003 7:19 AM
> > Subject: Re: [fairchildclub] PT wheel change
> >
> >
> > >Charles,
> > >
> > >Contact Roger Miller at(901) 853-3963. Roger did the first Cleveland
> > >Conversion on a PT-26 it looks very good
> > >I am sure Roger would send you some photos if you asked him.
> > >
> > >John Berendt
> > >----- Original Message -----
> > >From: "Charles Mueller"
> > >To:
> > >Sent: Monday, April 07, 2003 11:03 AM
> > >Subject: [fairchildclub] PT wheel change
> > >
> > >
> > >> I've been ready to change over to Cleveland brakes on my PT-26
> > >> project, but find myself hesitating whenever I look at the Cleveland
> > >> wheel rims supplied with the brake conversion kit. Compared to the
> > >> original PT wheels they look rather "modern" and I'm wondering how
> > >> they would appear when this rebuild project is finished.
> > >>
> > >> I may be opening a can of worms here - but would like to hear of any
> > >> comments group members may have. If there are any photos around of
PTs
> > >> with the Cleveland wheels that would be really appreciated.
> > >>
> > >> Charles Mueller
> > >>
> > >>
> > >>
> > >> To unsubscribe from this group, send an email to:
> > >> fairchildclub-unsubscribe@yahoogroups.com
> > >>
> > >>
> > >>
> > >> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >>
> > >>
> > >
> > >
> > >
> > >To unsubscribe from this group, send an email to:
> > >fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > >Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'