Re: Engine Parts

An archive of all the messages posted in the old Fairchild Club Yahoo Group. It is not possible to start a new topic in this forum (please use one of the other forums for new threads), but you can continue to post on existing topics.
Post Reply
tdlegrand3
Posts: 2
Joined: Thu Dec 19, 2002 1:52 pm

Engine Parts

Post by tdlegrand3 »

'Hi all - new to the group. Anyone have sources for cylinder
guides/seats, valves, pistons, rings, etc. for Ranger cylinders.
Would appreciate any and all leads. Thanks. Tom'
john casner
Posts: 9
Joined: Fri Nov 08, 2002 8:09 am

Re: Engine Parts

Post by john casner »

'I am a beginner so take my word with a grain of salt,but Fresno Airparts seems to have most of those items.John C.
----- Original Message -----
From: tdlegrand3
To: fairchildclub@yahoogroups.com
Sent: Thursday, December 19, 2002 1:52 PM
Subject: [fairchildclub] Engine Parts


Hi all - new to the group. Anyone have sources for cylinder
guides/seats, valves, pistons, rings, etc. for Ranger cylinders.
Would appreciate any and all leads. Thanks. Tom


To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
'
tdlegrand3
Posts: 2
Joined: Thu Dec 19, 2002 1:52 pm

Re: Engine Parts

Post by tdlegrand3 »

'John, thanks for the response on the engine parts. We have tried
Fresno Airparts but it seems all they have is a few std size parts.
We are a small engine/cylinder shop in kansas and it's not very
common that we get ranger cylinders anymore but every once in
awhile....... Thanks again!:) ---
In fairchildclub@yahoogroups.com, "john casner" wrote:
> I am a beginner so take my word with a grain of salt,but Fresno
Airparts seems to have most of those items.John C.
> ----- Original Message -----
> From: tdlegrand3
> To: fairchildclub@yahoogroups.com
> Sent: Thursday, December 19, 2002 1:52 PM
> Subject: [fairchildclub] Engine Parts
>
>
> Hi all - new to the group. Anyone have sources for cylinder
> guides/seats, valves, pistons, rings, etc. for Ranger cylinders.
> Would appreciate any and all leads. Thanks. Tom
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
'
Post Reply