Re: Ranger Eng Bushings

[Jamie S. Treat]

'All Ranger owners:

As you may be aware our major supply of Ranger engine Bushings is
gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
A. Thank you!

I just had discussion with the Aerospace Eng at LORD Co. At the
present time LORD has scrapped all the tooling to fabricate J-1303-A
(Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
willing to retool to fabricate new stock if interest is enough to
warrent such.

Looking at the drawing, tooling will be quite easy. They will be
looking at eliminating the hollow space inside the bushing which will
add about 1/4 lb per unit. I have made a preliminary commitment to
LORD that they should be able to sell at least 50 sets which equates
to 200 units. The new mounts will be of better quality then the
originals due to advancement in rubber and adheasive. I myself have
purchased some new/old stock last year and the mounts have already
failed, riding metal to metal. I have also told LORD that I will
take at least three complete sets (12 pieces) for bench stock.

So I put this out to the Ranger owners. If you want new engine mount
bushings. Email/U.S. Mail me and I will collect those interested and
notify LORD. The last price I had from Fresno Airparts was $45.00 a
piece for 50 year old rubber parts. I believe the new ones will be
less $$$.

(DO NOT SEND MONEY) Just send me your order!!!!

Send to: JSTreat360@aol.com

Or

Aircraft Restoration & Repair
Jamie S. Treat (719-536-0459 hm)
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO. 80106

I will need the following:

Name:
Address:
Phone:
Email:
How many units:

Sincerely

Jamie S. Treat
24R46 NC81281'

[john casner]

'Jamie, count me in for 12 pieces.John Casner
P.O.Box 89
Lockhart,Texas 78644
512-376-6619
jcasner@austin.rr.com

----- Original Message -----
From: Jamie S. Treat
To: fairchildclub@yahoogroups.com
Sent: Monday, November 11, 2002 2:36 PM
Subject: [fairchildclub] Ranger Eng Bushings


All Ranger owners:

As you may be aware our major supply of Ranger engine Bushings is
gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
A. Thank you!

I just had discussion with the Aerospace Eng at LORD Co. At the
present time LORD has scrapped all the tooling to fabricate J-1303-A
(Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
willing to retool to fabricate new stock if interest is enough to
warrent such.

Looking at the drawing, tooling will be quite easy. They will be
looking at eliminating the hollow space inside the bushing which will
add about 1/4 lb per unit. I have made a preliminary commitment to
LORD that they should be able to sell at least 50 sets which equates
to 200 units. The new mounts will be of better quality then the
originals due to advancement in rubber and adheasive. I myself have
purchased some new/old stock last year and the mounts have already
failed, riding metal to metal. I have also told LORD that I will
take at least three complete sets (12 pieces) for bench stock.

So I put this out to the Ranger owners. If you want new engine mount
bushings. Email/U.S. Mail me and I will collect those interested and
notify LORD. The last price I had from Fresno Airparts was $45.00 a
piece for 50 year old rubber parts. I believe the new ones will be
less $$$.

(DO NOT SEND MONEY) Just send me your order!!!!

Send to: JSTreat360@aol.com

Or

Aircraft Restoration & Repair
Jamie S. Treat (719-536-0459 hm)
24201 David C. Johnson Loop
Kelly Airpark
Elbert, CO. 80106

I will need the following:

Name:
Address:
Phone:
Email:
How many units:

Sincerely

Jamie S. Treat
24R46 NC81281


To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

'

[WALTER ALBERT]

'I will check with JERRY WALBRUN who is restoring a pt19 and have him get in
touch with you. Walt

----- Original Message -----
From: john casner
To:
Sent: Monday, November 11, 2002 5:55 PM
Subject: Re: [fairchildclub] Ranger Eng Bushings


> Jamie, count me in for 12 pieces.John Casner
> P.O.Box 89
> Lockhart,Texas 78644
> 512-376-6619
> jcasner@austin.rr.com
>
> ----- Original Message -----
> From: Jamie S. Treat
> To: fairchildclub@yahoogroups.com
> Sent: Monday, November 11, 2002 2:36 PM
> Subject: [fairchildclub] Ranger Eng Bushings
>
>
> All Ranger owners:
>
> As you may be aware our major supply of Ranger engine Bushings is
> gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD Co. At the
> present time LORD has scrapped all the tooling to fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
> willing to retool to fabricate new stock if interest is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy. They will be
> looking at eliminating the hollow space inside the bushing which will
> add about 1/4 lb per unit. I have made a preliminary commitment to
> LORD that they should be able to sell at least 50 sets which equates
> to 200 units. The new mounts will be of better quality then the
> originals due to advancement in rubber and adheasive. I myself have
> purchased some new/old stock last year and the mounts have already
> failed, riding metal to metal. I have also told LORD that I will
> take at least three complete sets (12 pieces) for bench stock.
>
> So I put this out to the Ranger owners. If you want new engine mount
> bushings. Email/U.S. Mail me and I will collect those interested and
> notify LORD. The last price I had from Fresno Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

[jstreat360@aol.com]

'John,

Thanks, on the list.

Jamie S. Treat A&P/IA

Visit my F-24 Web Site:
http://hometown.aol.com/ftreat9191/AIRCRAFTRESTORATIONREPAIRindex.html">Aircraft Restoration & Repair

Visit my Light Aircraft Site:
http://hometown.aol.com/jstreat360/myhomepage/business.html">Aircraft Restoration & Repair

Meet my Family:
http://hometown.aol.com/ftreat9191/TreatFamilyHomePage.html">Treat Family Home Page



[Non-text portions of this message have been removed]'

[John Berendt]

'Jamie,
lookd like agoo deal too meput me downfot two sets. I willnot install the
old mounts that I got from LOUleibee some years ago. I will run this in the
"FLyer.
John Berendt"

----- Original Message -----
From: "Jamie S. Treat"
To:
Sent: Monday, November 11, 2002 2:36 PM
Subject: [fairchildclub] Ranger Eng Bushings


> All Ranger owners:
>
> As you may be aware our major supply of Ranger engine Bushings is
> gone. Gene Haines provided me with a LORD Engine Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD Co. At the
> present time LORD has scrapped all the tooling to fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970. LORD may be
> willing to retool to fabricate new stock if interest is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy. They will be
> looking at eliminating the hollow space inside the bushing which will
> add about 1/4 lb per unit. I have made a preliminary commitment to
> LORD that they should be able to sell at least 50 sets which equates
> to 200 units. The new mounts will be of better quality then the
> originals due to advancement in rubber and adheasive. I myself have
> purchased some new/old stock last year and the mounts have already
> failed, riding metal to metal. I have also told LORD that I will
> take at least three complete sets (12 pieces) for bench stock.
>
> So I put this out to the Ranger owners. If you want new engine mount
> bushings. Email/U.S. Mail me and I will collect those interested and
> notify LORD. The last price I had from Fresno Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

[james chybicki]

'Hi Jamie-
Should I return the mounts I just bought from Fresno
Air Parts? I bought 2 sets. They forgot to mention
they were 50 years old.
Any Idea on the lead time for the new mounts?
Our Baby is starting to go back together, and we would
hate to put on bad parts.
Let me know if there is anything that jumps out on the
airframe that I need to make sure we put an extra look
at during build-up.
Jim

--- "Jamie S. Treat" wrote:

> All Ranger owners:
>
> As you may be aware our major supply of Ranger
> engine Bushings is
> gone. Gene Haines provided me with a LORD Engine
> Mount Drawing J-1303-
> A. Thank you!
>
> I just had discussion with the Aerospace Eng at LORD
> Co. At the
> present time LORD has scrapped all the tooling to
> fabricate J-1303-A
> (Fairchild P/N 8058) bushing, this was done in 1970.
> LORD may be
> willing to retool to fabricate new stock if interest
> is enough to
> warrent such.
>
> Looking at the drawing, tooling will be quite easy.
> They will be
> looking at eliminating the hollow space inside the
> bushing which will
> add about 1/4 lb per unit. I have made a preliminary
> commitment to
> LORD that they should be able to sell at least 50
> sets which equates
> to 200 units. The new mounts will be of better
> quality then the
> originals due to advancement in rubber and
> adheasive. I myself have
> purchased some new/old stock last year and the
> mounts have already
> failed, riding metal to metal. I have also told LORD
> that I will
> take at least three complete sets (12 pieces) for
> bench stock.
>
> So I put this out to the Ranger owners. If you want
> new engine mount
> bushings. Email/U.S. Mail me and I will collect
> those interested and
> notify LORD. The last price I had from Fresno
> Airparts was $45.00 a
> piece for 50 year old rubber parts. I believe the
> new ones will be
> less $$$.
>
> (DO NOT SEND MONEY) Just send me your order!!!!
>
> Send to: JSTreat360@aol.com
>
> Or
>
> Aircraft Restoration & Repair
> Jamie S. Treat (719-536-0459 hm)
> 24201 David C. Johnson Loop
> Kelly Airpark
> Elbert, CO. 80106
>
> I will need the following:
>
> Name:
> Address:
> Phone:
> Email:
> How many units:
>
> Sincerely
>
> Jamie S. Treat
> 24R46 NC81281
>
>

__________________________________________________
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://launch.yahoo.com/u2'

[plsurflyin@aol.com]

'Jamie,
Put me down for 2 sets (8 total pieces).

Don Parsons


[Non-text portions of this message have been removed]'

[Jamie S. Treat]

'Jim,

I would go ahead and use them. What other choice do you have. Mine
only lasted a year, but easy to change one at a time. Al Ball has
some new stock, but would like to hold on to them to satisfy his
rebuilding efforts. Al also mentioned that Fresno's were new
manufactured maybe by Vibration Isolators. Unknown if this company is
still in business. Al had his made about 9 to 10 years ago. You may
have recieved the later units than I recieved from Fresno. As for
lead time, waiting for LORD to get back with me. As of last night, I
recieved orders for 50 units so far.

Jamie

> Hi Jamie-
> Should I return the mounts I just bought from Fresno
> Air Parts? I bought 2 sets. They forgot to mention
> they were 50 years old.
> Any Idea on the lead time for the new mounts?
> Our Baby is starting to go back together, and we would
> hate to put on bad parts.
> Let me know if there is anything that jumps out on the
> airframe that I need to make sure we put an extra look
> at during build-up.
> Jim
>
> --- "Jamie S. Treat" wrote:
> > All Ranger owners:
> >
> > As you may be aware our major supply of Ranger
> > engine Bushings is
> > gone. Gene Haines provided me with a LORD Engine
> > Mount Drawing J-1303-
> > A. Thank you!
> >
> > I just had discussion with the Aerospace Eng at LORD
> > Co. At the
> > present time LORD has scrapped all the tooling to
> > fabricate J-1303-A
> > (Fairchild P/N 8058) bushing, this was done in 1970.
> > LORD may be
> > willing to retool to fabricate new stock if interest
> > is enough to
> > warrent such.
> >
> > Looking at the drawing, tooling will be quite easy.
> > They will be
> > looking at eliminating the hollow space inside the
> > bushing which will
> > add about 1/4 lb per unit. I have made a preliminary
> > commitment to
> > LORD that they should be able to sell at least 50
> > sets which equates
> > to 200 units. The new mounts will be of better
> > quality then the
> > originals due to advancement in rubber and
> > adheasive. I myself have
> > purchased some new/old stock last year and the
> > mounts have already
> > failed, riding metal to metal. I have also told LORD
> > that I will
> > take at least three complete sets (12 pieces) for
> > bench stock.
> >
> > So I put this out to the Ranger owners. If you want
> > new engine mount
> > bushings. Email/U.S. Mail me and I will collect
> > those interested and
> > notify LORD. The last price I had from Fresno
> > Airparts was $45.00 a
> > piece for 50 year old rubber parts. I believe the
> > new ones will be
> > less $$$.
> >
> > (DO NOT SEND MONEY) Just send me your order!!!!
> >
> > Send to: JSTreat360@a...
> >
> > Or
> >
> > Aircraft Restoration & Repair
> > Jamie S. Treat (719-536-0459 hm)
> > 24201 David C. Johnson Loop
> > Kelly Airpark
> > Elbert, CO. 80106
> >
> > I will need the following:
> >
> > Name:
> > Address:
> > Phone:
> > Email:
> > How many units:
> >
> > Sincerely
> >
> > Jamie S. Treat
> > 24R46 NC81281
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> U2 on LAUNCH - Exclusive greatest hits videos
> http://launch.yahoo.com/u2

'

[Thekortas@aol.com]

'Jamie: I'm good for at least one set (four pieces total). I've got a few
spare older pieces that came off PTs years ago but would like some new ones.
Please count me in. Thanks.
Steve Korta'

[jstreat360@aol.com]

'Your on the list. Al Ball had 450 units made, down to 300. Using them for his
own bench stock. He will sell a few if the person is in a real pinch. 47.50
per unit. He was charging the same as Fresno.

Jamie S. Treat A&P/IA

Visit my F-24 Web Site:
http://hometown.aol.com/ftreat9191/AIRCRAFTRESTORATIONREPAIRindex.html">Aircraft Restoration & Repair

Visit my Light Aircraft Site:
http://hometown.aol.com/jstreat360/myhomepage/business.html">Aircraft Restoration & Repair

Meet my Family:
http://hometown.aol.com/ftreat9191/TreatFamilyHomePage.html">Treat Family Home Page



[Non-text portions of this message have been removed]'