Re: Ranger Hub

dfwsfug · Post by **dfwsfug** » Sat Jan 12, 2002 2:25 pm

'A pilot friend is looking for large hub with bolts to fit Ranger -440-
200 HP for carved wood prop application.If any poster knows of a
source would be appreciated. He has rebuilt his engine but is unable
to locate a large hub.'

lov2fly28525@cs.com · Post by **lov2fly28525@cs.com** » Sat Jan 12, 2002 3:56 pm

'Try Mike, Ron Hanks just bought a Warner hub from him.
Falcon Propellers
Mike Redpath
P.O. Box 678
Washington, OK 73093
Phone
(405) 288-6499
Email
mredpath@aol.com

Al Rice
F-24W NC28525
Meridian, Idaho

[Non-text portions of this message have been removed]'

WALTER ALBERT · Post by **WALTER ALBERT** » Sat Jan 12, 2002 8:15 pm

'I have a large hug but no crush plate. Have 8 bolts but no special nuts.
Walt

----- Original Message -----
From: dfwsfug
To:
Sent: Saturday, January 12, 2002 3:26 PM
Subject: [fairchildclub] Ranger Hub

> A pilot friend is looking for large hub with bolts to fit Ranger -440-
> 200 HP for carved wood prop application.If any poster knows of a
> source would be appreciated. He has rebuilt his engine but is unable
> to locate a large hub.
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

dfwsfug · Post by **dfwsfug** » Sat Jan 12, 2002 8:52 pm

'Thanks Al will pass the info on. He's not online.

--- In fairchildclub@y..., lov2fly28525@c... wrote:
> Try Mike, Ron Hanks just bought a Warner hub from him.
> Falcon Propellers
> Mike Redpath
> P.O. Box 678
> Washington, OK 73093
> Phone
> (405) 288-6499
> Email
> mredpath@a...
>
> Al Rice
> F-24W NC28525
> Meridian, Idaho
>
>
> [Non-text portions of this message have been removed]

'

dfwsfug · Post by **dfwsfug** » Sat Jan 12, 2002 9:02 pm

'Walt
Have him on the phone (not online)he wants to know if the crush plate
is a simple flat plate fabrication or will he need to find factory
crush plates. Please provide detail on missing nuts. Are they common
type replaceable? What is your price? You may send me private E-mail
if you wish.
Thanks

--- In fairchildclub@y..., "WALTER ALBERT" wrote:
> I have a large hug but no crush plate. Have 8 bolts but no special
nuts.
> Walt
> ----- Original Message -----
> From: dfwsfug
> To:
> Sent: Saturday, January 12, 2002 3:26 PM
> Subject: [fairchildclub] Ranger Hub
>
>
> > A pilot friend is looking for large hub with bolts to fit Ranger -
440-
> > 200 HP for carved wood prop application.If any poster knows of a
> > source would be appreciated. He has rebuilt his engine but is
unable
> > to locate a large hub.
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@y...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >

'

Marge & John Berendt · Sun Jan 13, 2002 1:24 pm

'I Have both the Warner and the large military hubs complete. Have him give
me a call at 507-263-2414.

John Berendt

----- Original Message -----
From: "dfwsfug"
To:
Sent: Saturday, January 12, 2002 2:26 PM
Subject: [fairchildclub] Ranger Hub

> A pilot friend is looking for large hub with bolts to fit Ranger -440-
> 200 HP for carved wood prop application.If any poster knows of a
> source would be appreciated. He has rebuilt his engine but is unable
> to locate a large hub.
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

WALTER ALBERT · Post by **WALTER ALBERT** » Sun Jan 13, 2002 8:21 pm

'the crush plate is machined with buildups etc. the nuts are very special
with a raised ring which aligns the bolt with the hub etc..It appears that
John has what is needed...walt

----- Original Message -----
From: dfwsfug
To:
Sent: Saturday, January 12, 2002 10:02 PM
Subject: [fairchildclub] Re: Ranger Hub

> Walt
> Have him on the phone (not online)he wants to know if the crush plate
> is a simple flat plate fabrication or will he need to find factory
> crush plates. Please provide detail on missing nuts. Are they common
> type replaceable? What is your price? You may send me private E-mail
> if you wish.
> Thanks
>
> --- In fairchildclub@y..., "WALTER ALBERT" wrote:
> > I have a large hug but no crush plate. Have 8 bolts but no special
> nuts.
> > Walt
> > ----- Original Message -----
> > From: dfwsfug
> > To:
> > Sent: Saturday, January 12, 2002 3:26 PM
> > Subject: [fairchildclub] Ranger Hub
> >
> >
> > > A pilot friend is looking for large hub with bolts to fit Ranger -
> 440-
> > > 200 HP for carved wood prop application.If any poster knows of a
> > > source would be appreciated. He has rebuilt his engine but is
> unable
> > > to locate a large hub.
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@y...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

dfwsfug · Post by **dfwsfug** » Mon Jan 14, 2002 9:46 am

'Al Walt John
Have passed the info to him.
Thanks again.'