Re: Ignation Harness for the Warner 165

[Tom Downey]

'I have recieved my harness form Radial Engine inc, and it is a work
of art, they really do nice work. But,,, It won't fit.
I have been looking at pictures of Chappies F-24 that he has on his
web page, and have noticed a difference between his and the one I
have, His has the mag leads coming from the mags to the rigid loom on
each side of the #1 cylinder, and passing thru the dish pan and
hooking up to the top of the mags. Mine has the Mag leads at the 3
O'Clock and 9 O'clock, passing thru between the 2 & 3 and the 6&7
cylinders and this places them at the side of the mags, and will not
make the connection.
I really would like to use a rigid loom because they look much
better, Does any one have any idea where I may obtain one that will
fit the Warner 165? All I really need is the rigid portion that sets
on the front of the engine.
Tom Downey A&P-IA NC19143'

[Glenn Chiappe]

'HI Tom,

The ignition harness on my Warner says "Jacobs" on it! I'll look for the paperwork on who did the wiring of the unit -- I have it at the hangar.

GC.
www.planeplace.com

----- Original Message -----
From: Tom Downey
To: fairchildclub@yahoogroups.com
Sent: Tuesday, October 09, 2001 8:09 PM
Subject: [fairchildclub] Ignation Harness for the Warner 165


I have recieved my harness form Radial Engine inc, and it is a work
of art, they really do nice work. But,,, It won't fit.
I have been looking at pictures of Chappies F-24 that he has on his
web page, and have noticed a difference between his and the one I
have, His has the mag leads coming from the mags to the rigid loom on
each side of the #1 cylinder, and passing thru the dish pan and
hooking up to the top of the mags. Mine has the Mag leads at the 3
O'Clock and 9 O'clock, passing thru between the 2 & 3 and the 6&7
cylinders and this places them at the side of the mags, and will not
make the connection.
I really would like to use a rigid loom because they look much
better, Does any one have any idea where I may obtain one that will
fit the Warner 165? All I really need is the rigid portion that sets
on the front of the engine.
Tom Downey A&P-IA NC19143


Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

'

[Tom Downey]

'--- In fairchildclub@y..., "Glenn Chiappe" wrote:

> HI Tom,
>
> The ignition harness on my Warner says "Jacobs" on it! I'll look

for the paperwork on who did the wiring of the unit -- I have it at
the hangar.

That is a big clue, Maybe I can find one if I know what I am looking
for. All I need is the Rigid tubing in front of the engine the
beautiful harness that I got from Radial Engines has the rest of what
I need.'

[wbaf1595@att.net]

'TRY CHARLIE BELL HE IS THE GURU ON WARNERS...

> I have recieved my harness form Radial Engine inc, and it is a work
> of art, they really do nice work. But,,, It won't fit.
> I have been looking at pictures of Chappies F-24 that he has on his
> web page, and have noticed a difference between his and the one I
> have, His has the mag leads coming from the mags to the rigid loom on
> each side of the #1 cylinder, and passing thru the dish pan and
> hooking up to the top of the mags. Mine has the Mag leads at the 3
> O'Clock and 9 O'clock, passing thru between the 2 & 3 and the 6&7
> cylinders and this places them at the side of the mags, and will not
> make the connection.
> I really would like to use a rigid loom because they look much
> better, Does any one have any idea where I may obtain one that will
> fit the Warner 165? All I really need is the rigid portion that sets
> on the front of the engine.
> Tom Downey A&P-IA NC19143
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'