Re: starter

robert hensarling · Post by **robert hensarling** » Fri Feb 23, 2001 12:39 pm

'I'm wanting to put a starter system on my PT-19. I have the starter, but
need everything else, including the generator, battery and box, switches,
solenoids, and on and on.

Does anyone have an "instruction" sheet that shows the parts, and how to
assemble? Also, I don't know a thing about 337's, but maybe I could get
some help/advise on that as well.
Thanks!
Robert Hensarling
http://www.mesquite-furniture.com
Uvalde, Texas'

pt19flyer@aol.com · Post by **pt19flyer@aol.com** » Fri Feb 23, 2001 1:29 pm

'Yo, Robert.
I have some photos, somewhere, of the installation in my plane. I'll look
for them. The switches and solenoids you can get from Aircraft Spruce or Wag
Aero.
Richard'

WALTER ALBERT · Post by **WALTER ALBERT** » Fri Feb 23, 2001 8:57 pm

'prior approval will be required for everything you will be doing. you must
have an a and p do the work or have him supervise you doing it. in additon
and ai or ia will have to sign off on the 337. you must remember you have a
certificated airplane...lots of luck. 12 volt 250 type bulbs are very very
scarce///////

----- Original Message -----
From: robert hensarling
To: fairchild
Sent: Friday, February 23, 2001 1:26 PM
Subject: [fairchildclub] starter

> I'm wanting to put a starter system on my PT-19. I have the starter, but
> need everything else, including the generator, battery and box, switches,
> solenoids, and on and on.
>
> Does anyone have an "instruction" sheet that shows the parts, and how to
> assemble? Also, I don't know a thing about 337's, but maybe I could get
> some help/advise on that as well.
> Thanks!
> Robert Hensarling
> http://www.mesquite-furniture.com
> Uvalde, Texas
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

robert hensarling · Post by **robert hensarling** » Fri Feb 23, 2001 9:50 pm

'-----Original Message-----
From: WALTER ALBERT
To: fairchildclub@yahoogroups.com
Date: Friday, February 23, 2001 8:57 PM
Subject: Re: [fairchildclub] starter

Why do I need a 12 V 250 type bulb for a starter?
Robert Hensarling
http://www.mesquite-furniture.com
Uvalde, Texas

>prior approval will be required for everything you will be doing. you must
>have an a and p do the work or have him supervise you doing it. in additon
>and ai or ia will have to sign off on the 337. you must remember you have

a

>certificated airplane...lots of luck. 12 volt 250 type bulbs are very very
>scarce///////
>----- Original Message -----
>From: robert hensarling
>To: fairchild
>Sent: Friday, February 23, 2001 1:26 PM
>Subject: [fairchildclub] starter
>
>
>> I'm wanting to put a starter system on my PT-19. I have the starter, but
>> need everything else, including the generator, battery and box, switches,
>> solenoids, and on and on.
>>
>> Does anyone have an "instruction" sheet that shows the parts, and how to
>> assemble? Also, I don't know a thing about 337's, but maybe I could get
>> some help/advise on that as well.
>> Thanks!
>> Robert Hensarling
>> http://www.mesquite-furniture.com
>> Uvalde, Texas
>>
>>
>>
>> To unsubscribe from this group, send an email to:
>> fairchildclub-unsubscribe@yahoogroups.com
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
>
>To unsubscribe from this group, send an email to:
>fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

Dorothy Haas · Post by **Dorothy Haas** » Tue Feb 27, 2001 3:11 am

'Hey Walter! Welcome to the club. Get a copy of T.O. no 01-115GA-4 Sec. 11
This will give you parts lists, wiring diagrams every thing you need. You
will need an A.I. who is simpatico too. All the parts are on the equipment
list and you will need a new weight and balance form and remember this is
1930 technology. I like your Webb site. Bob Haas Checkpoint Aviation

-----Original Message-----
From: WALTER ALBERT [mailto:wbaf1595@att.net]
Sent: Friday, February 23, 2001 9:51 PM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] starter

prior approval will be required for everything you will be doing. you must
have an a and p do the work or have him supervise you doing it. in additon
and ai or ia will have to sign off on the 337. you must remember you have a
certificated airplane...lots of luck. 12 volt 250 type bulbs are very very
scarce///////

----- Original Message -----
From: robert hensarling
To: fairchild
Sent: Friday, February 23, 2001 1:26 PM
Subject: [fairchildclub] starter

> I'm wanting to put a starter system on my PT-19. I have the starter, but
> need everything else, including the generator, battery and box, switches,
> solenoids, and on and on.
>
> Does anyone have an "instruction" sheet that shows the parts, and how to
> assemble? Also, I don't know a thing about 337's, but maybe I could get
> some help/advise on that as well.
> Thanks!
> Robert Hensarling
> http://www.mesquite-furniture.com
> Uvalde, Texas
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

'

robert hensarling · Post by **robert hensarling** » Tue Feb 27, 2001 7:12 am

'-----Original Message-----
From: Dorothy Haas
To: fairchildclub@yahoogroups.com
Date: Tuesday, February 27, 2001 3:11 AM
Subject: RE: [fairchildclub] starter

Hi Bob. Thanks for the info, I'll follow your directions. I appreciate the
help, that's what I was looking for. Thanks also for the kind words about
my website.
(Incidently, I'm Robert, not Walter)
I may be asking more later!
Robert Hensarling
http://www.mesquite-furniture.com
Uvalde, Texas

> Hey Walter! Welcome to the club. Get a copy of T.O. no 01-115GA-4 Sec. 11
>This will give you parts lists, wiring diagrams every thing you need. You
>will need an A.I. who is simpatico too. All the parts are on the equipment
>list and you will need a new weight and balance form and remember this is
>1930 technology. I like your Webb site. Bob Haas Checkpoint Aviation
>
>-----Original Message-----
>From: WALTER ALBERT [mailto:wbaf1595@att.net]
>Sent: Friday, February 23, 2001 9:51 PM
>To: fairchildclub@yahoogroups.com
>Subject: Re: [fairchildclub] starter
>
>prior approval will be required for everything you will be doing. you must
>have an a and p do the work or have him supervise you doing it. in additon
>and ai or ia will have to sign off on the 337. you must remember you have

a

>certificated airplane...lots of luck. 12 volt 250 type bulbs are very very
>scarce///////
>----- Original Message -----
>From: robert hensarling
>To: fairchild
>Sent: Friday, February 23, 2001 1:26 PM
>Subject: [fairchildclub] starter
>
>
>> I'm wanting to put a starter system on my PT-19. I have the starter, but
>> need everything else, including the generator, battery and box, switches,
>> solenoids, and on and on.
>>
>> Does anyone have an "instruction" sheet that shows the parts, and how to
>> assemble? Also, I don't know a thing about 337's, but maybe I could get
>> some help/advise on that as well.
>> Thanks!
>> Robert Hensarling
>> http://www.mesquite-furniture.com
>> Uvalde, Texas
>>
>>
>>
>> To unsubscribe from this group, send an email to:
>> fairchildclub-unsubscribe@yahoogroups.com
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>
>
>
>To unsubscribe from this group, send an email to:
>fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>To unsubscribe from this group, send an email to:
>fairchildclub-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'