Fairchild Club Forum

'Hi,
Many thanks for your helps
J-Pierre, UC61K F-AZCI

--- In fairchildclub@yahoogroups.com, Jim Higham wrote:
>
> .001-.003 clearance on the journals for the housing and the bushing with a inservice limit of .006 for the bushing, none on the lobes. Lobs measure .005 lift, heal ends at 15 ...

'Hi,
http://img577.imageshack.us/img577/2624/p1100883.jpg
I assemble my Ranger engine after a important check, and I would like to known the limit of wear of my camshaft. (see join picture)
I have the table of limits but I don't know how to calculate the wear.
Thanks for your help
J-Pierre ...

'Hi,
Your 24W use 12 volt power or are you using 2 batteries (I see that the Concorde is a 12 Volt battery)?
Many thanks
J-Pierre
--- In fairchildclub@yahoogroups.com, n244ms@... wrote:
>
> Joe,
> I am using the Concorde RG-35AXC in my 24W-40 and have had very good luck with it. It has the ...

'Hi,
And for the Ranger R46 ?
Many thanks
Jean-Pierre

--- In fairchildclub@yahoogroups.com, Joe Preston wrote:
>
> Just curious as to what battery you guys are using for the Warner
> powered birds? Any thoughts?
>
>
> Joe
>
>
>
> [Non-text portions of this message have been ...

'Hi Mike,
What is your normal operation average oil consumption with the 60wt and 50 wt ?
Many thanks...J-Pierre

--- In fairchildclub@yahoogroups.com, "Mike Danielle" wrote:
>
> Yes, that works well down to about 40 degrees. Then you need to switch to
> 50wt. I like Aeroshell plus. Protects ...