Page 1 of 1
PT-23 Elevator hinge brackets
Posted: Sat Jun 18, 2016 10:54 pm
by tomatotruck993
'
Can anyone offer me some photos or drawings of the openings made in the horizontal Stabilizer to tighten the hinge bracket nuts?'
Re: PT-23 Elevator hinge brackets
Posted: Sun Jun 19, 2016 12:08 am
by Curt Kinchen
'It's Service Bulletin 42-1-C. The sketch shows elliptical slot with round ends 1.5 inches long with 3/8 radius at both ends. Parallel to the spar. Just forward of the spar.
No torque value given, tighten as required.
Curt Kinchen
Sent from my iPad
Can anyone offer me some photos or drawings of the openings made in the horizontal Stabilizer to tighten the hinge bracket nuts?
'