F24 C8C Rescue
Posted: Fri Jul 13, 2012 7:36 am
'Hello Group,
I've got 2 weeks to find a home for my C8C Project before I leave to the
other side of the planet for 3 years. I've exhausted my "reasonable"
local storage options. Any interest out there?
It would be a good companion for anyone else restoring a C8C
http://www.avclaims.com/N14722.html
Registration Canada: CF-AAT formerly NC 14321
S/N: 2612
Certificate No. 535
Model: C8C
* Fuselage, no FWF
* No wings, but all the hardware is there: front and rear lift
struts, ailerons, push rods, torque tubes, drag trusses, etc,
* There are a couple of wing rib jigs (ancient), a number of
representative ribs, etc
* 4 wing tanks in total (a rare commodity)
* Complete rear empennage and 2 rudders
* Gear legs (no shocks)
* Most of sheet metal, cowling, brackets, side window, etc,
* Doors (Skins, 1 good wood frame, other scrap, some door hardware)
* Wheel pants
* There are also some parts from NC 14314 (rear rudder assembly,
and probably the other 2 wing tanks, apparently this was briefly
registered to the president of Cessna).
Pictures etc in Photo/File view mode at following link:
https://www.idrive.com/idrivee/ibsjsp/IDEVSGetShare.jsp?k=rkcuy36267
That's about the summary.
[Non-text portions of this message have been removed]'
I've got 2 weeks to find a home for my C8C Project before I leave to the
other side of the planet for 3 years. I've exhausted my "reasonable"
local storage options. Any interest out there?
It would be a good companion for anyone else restoring a C8C
http://www.avclaims.com/N14722.html
Registration Canada: CF-AAT formerly NC 14321
S/N: 2612
Certificate No. 535
Model: C8C
* Fuselage, no FWF
* No wings, but all the hardware is there: front and rear lift
struts, ailerons, push rods, torque tubes, drag trusses, etc,
* There are a couple of wing rib jigs (ancient), a number of
representative ribs, etc
* 4 wing tanks in total (a rare commodity)
* Complete rear empennage and 2 rudders
* Gear legs (no shocks)
* Most of sheet metal, cowling, brackets, side window, etc,
* Doors (Skins, 1 good wood frame, other scrap, some door hardware)
* Wheel pants
* There are also some parts from NC 14314 (rear rudder assembly,
and probably the other 2 wing tanks, apparently this was briefly
registered to the president of Cessna).
Pictures etc in Photo/File view mode at following link:
https://www.idrive.com/idrivee/ibsjsp/IDEVSGetShare.jsp?k=rkcuy36267
That's about the summary.
[Non-text portions of this message have been removed]'