Page 1 of 1
tailwheel collar
Posted: Sat May 25, 2002 8:46 am
by KineykW@aol.com
'I am looking for the brass collar that is part of the tailwheel for the
F-24. Does any one have one around? Mine is worn and I guess I'll have to
braize on some more material and machine it out if I can't find a
replacement. Thank you.
Wallace Kineyko'
Re: tailwheel collar
Posted: Sat Jun 01, 2002 7:06 pm
by WALTER ALBERT
'will check my supply tomorrow.. Walt
----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar
> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: tailwheel collar
Posted: Fri Jun 07, 2002 11:12 am
by WALTER ALBERT
'I have one. walt
----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar
> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: tailwheel collar
Posted: Wed Jun 19, 2002 8:36 pm
by WALTER ALBERT
'I have the brass collar you need. Walt
----- Original Message -----
From:
To:
Sent: Saturday, May 25, 2002 10:45 AM
Subject: [fairchildclub] tailwheel collar
> I am looking for the brass collar that is part of the tailwheel for the
> F-24. Does any one have one around? Mine is worn and I guess I'll have
to
> braize on some more material and machine it out if I can't find a
> replacement. Thank you.
>
> Wallace Kineyko
>
>
>
>
>
> To unsubscribe from this group, send an email to:
>
fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
'
Re: tailwheel collar
Posted: Thu Jun 20, 2002 5:50 am
by KineykW@aol.com
'thanks walt, but i had somebody here machine one out of a billet of brass.
it cost me, but the tailwheel is now better than factory new.'