Re: Should I part it out?

Stuart Burgess · Post by **Stuart Burgess** » Wed Mar 16, 2011 1:00 am

'Hi Tom

What would you be asking for the footpeg castings?

Regards

Stuart

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Tom_Downey
Sent: 15 March 2011 05:18 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Should I part it out?

Geoff, Thank you very much. I'm going to wait to the last moment to move the
24, I may get the engine back to together and install it before I must
vacate the hangar here.

How is your aircraft? you been flying ? I still have the two foot peg
castings, they are for sale if you know any one who wants them.

--- In fairchildclub@yahoogroups.com, "Geoff Guest" wrote:
>
> Tom;
> Hopefully with the encouragement and a little bit of help we can get you
settled in BVS. You helped us several years ago with the cast aluminum foot
pegs for our C8E gear legs and it sounds like you could use a hand now. I'm
just north of you in White Rock, BC and only a couple of hours away. We can
relocate your "24" to Skagit. We've moved two C8Es to BC by road, one from
California, the other from Pennsylvania, and a Murphy Rebel from Squamish to
Pitt Meadows so 30 miles should be a breeze. We've probably got help at the
Skagit end as well so let me know what and when you need it.
>
> Geoff Guest
>
> ----- Original Message -----
> From: Tom_Downey
> To: fairchildclub@yahoogroups.com
> Sent: Sunday, March 13, 2011 9:49 PM
> Subject: [fairchildclub] Should I part it out?
>
>
>
> I have lost my hangar at OKH and have a new on at BVS, the engine is off
the 24, so I must remove the wings and horizontal so that it can be
trailered and taken to BVS.
>
> should I just sell it as parts, take the loss and run. ?
>
>
>
>
>
>
>
----------------------------------------------------------------------------
--
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.872 / Virus Database: 271.1.1/3505 - Release Date: 03/13/11
12:34:00
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

Yahoo! Groups Links

_____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1498/3508 - Release Date: 03/15/11

[Non-text portions of this message have been removed]

'

Tom_Downey · Post by **Tom_Downey** » Wed Mar 16, 2011 9:12 am

'$100 for the pair, send me a e-mail and 'll send pictures, these are for the step forward of the gear leg on a C8C gear leg.

--- In fairchildclub@yahoogroups.com, "Stuart Burgess" wrote:
>
> Hi Tom
>
>
>
> What would you be asking for the footpeg castings?
>
>
>
> Regards
>
>
>
> Stuart
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Tom_Downey
> Sent: 15 March 2011 05:18 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Re: Should I part it out?
>
>
>
> Geoff, Thank you very much. I'm going to wait to the last moment to move the
> 24, I may get the engine back to together and install it before I must
> vacate the hangar here.
>
> How is your aircraft? you been flying ? I still have the two foot peg
> castings, they are for sale if you know any one who wants them.
>
> --- In fairchildclub@yahoogroups.com, "Geoff Guest" wrote:
> >
> > Tom;
> > Hopefully with the encouragement and a little bit of help we can get you
> settled in BVS. You helped us several years ago with the cast aluminum foot
> pegs for our C8E gear legs and it sounds like you could use a hand now. I'm
> just north of you in White Rock, BC and only a couple of hours away. We can
> relocate your "24" to Skagit. We've moved two C8Es to BC by road, one from
> California, the other from Pennsylvania, and a Murphy Rebel from Squamish to
> Pitt Meadows so 30 miles should be a breeze. We've probably got help at the
> Skagit end as well so let me know what and when you need it.
> >
> > Geoff Guest
> >
> > ----- Original Message -----
> > From: Tom_Downey
> > To: fairchildclub@yahoogroups.com
> > Sent: Sunday, March 13, 2011 9:49 PM
> > Subject: [fairchildclub] Should I part it out?
> >
> >
> >
> > I have lost my hangar at OKH and have a new on at BVS, the engine is off
> the 24, so I must remove the wings and horizontal so that it can be
> trailered and taken to BVS.
> >
> > should I just sell it as parts, take the loss and run. ?
> >
> >
> >
> >
> >
> >
> >
> ----------------------------------------------------------------------------
> --
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.872 / Virus Database: 271.1.1/3505 - Release Date: 03/13/11
> 12:34:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
> _____
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3508 - Release Date: 03/15/11
>
>
>
> [Non-text portions of this message have been removed]
>

'

OldOOwl@aol.com · Post by **OldOOwl@aol.com** » Wed Mar 16, 2011 10:52 am

'Would you happen to have the steps which mount on the aft of the landing
gear....the main entry steps? My 1937 24G came with an alternate
setup....installed back in the '40s after a ground loop. I want to get it back to
original.

Richard Hawley

In a message dated 3/16/2011 9:12:32 A.M. Mountain Daylight Time,
nc19143@comcast.net writes:

$100 for the pair, send me a e-mail and 'll send pictures, these are for
the step forward of the gear leg on a C8C gear leg.

--- In _fairchildclub@yahoogroups.com_
(mailto:fairchildclub@yahoogroups.com) , "Stuart Burgess" wrote:

>
> Hi Tom
>
>
>
> What would you be asking for the footpeg castings?
>
>
>
> Regards
>
>
>
> Stuart
>
>
>
> From: _fairchildclub@yahoogroups.com_

(mailto:fairchildclub@yahoogroups.com) [mailto:_fairchildclub@yahoogroups.com_
(mailto:fairchildclub@yahoogroups.com) ]

> On Behalf Of Tom_Downey
> Sent: 15 March 2011 05:18 PM
> To: _fairchildclub@yahoogroups.com_

(mailto:fairchildclub@yahoogroups.com)

> Subject: [fairchildclub] Re: Should I part it out?
>
>
>
> Geoff, Thank you very much. I'm going to wait to the last moment to move

the

> 24, I may get the engine back to together and install it before I must
> vacate the hangar here.
>
> How is your aircraft? you been flying ? I still have the two foot peg
> castings, they are for sale if you know any one who wants them.
>
> --- In _fairchildclub@yahoogroups.com_

(mailto:fairchildclub@yahoogroups.com) , "Geoff Guest" wrote:

> >
> > Tom;
> > Hopefully with the encouragement and a little bit of help we can get

you

> settled in BVS. You helped us several years ago with the cast aluminum

foot

> pegs for our C8E gear legs and it sounds like you could use a hand now.

I'm

> just north of you in White Rock, BC and only a couple of hours away. We

can

> relocate your "24" to Skagit. We've moved two C8Es to BC by road, one

from

> California, the other from Pennsylvania, and a Murphy Rebel from

Squamish to

> Pitt Meadows so 30 miles should be a breeze. We've probably got help at

the

> Skagit end as well so let me know what and when you need it.
> >
> > Geoff Guest
> >
> > ----- Original Message -----
> > From: Tom_Downey
> > To: _fairchildclub@yahoogroups.com_

(mailto:fairchildclub@yahoogroups.com)

> > Sent: Sunday, March 13, 2011 9:49 PM
> > Subject: [fairchildclub] Should I part it out?
> >
> >
> >
> > I have lost my hangar at OKH and have a new on at BVS, the engine is

off

> the 24, so I must remove the wings and horizontal so that it can be
> trailered and taken to BVS.
> >
> > should I just sell it as parts, take the loss and run. ?
> >
> >
> >
> >
> >
> >
> >
> ----------------------------------------------------------
> --
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.872 / Virus Database: 271.1.1/3505 - Release Date:

03/13/11

> 12:34:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
> _____
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3508 - Release Date: 03/15/11
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]'

Tom_Downey · Post by **Tom_Downey** » Wed Mar 16, 2011 5:06 pm

'Just the set on mine..........and I'm not ready to part with them yet.

--- In fairchildclub@yahoogroups.com, OldOOwl@... wrote:
>
> Would you happen to have the steps which mount on the aft of the landing
> gear....the main entry steps? My 1937 24G came with an alternate
> setup....installed back in the '40s after a ground loop. I want to get it back to
> original.
>
> Richard Hawley
>
>
> In a message dated 3/16/2011 9:12:32 A.M. Mountain Daylight Time,
> nc19143@... writes:
>
>
>
>
> $100 for the pair, send me a e-mail and 'll send pictures, these are for
> the step forward of the gear leg on a C8C gear leg.
>
> --- In _fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com) , "Stuart Burgess" wrote:
> >
> > Hi Tom
> >
> >
> >
> > What would you be asking for the footpeg castings?
> >
> >
> >
> > Regards
> >
> >
> >
> > Stuart
> >
> >
> >
> > From: _fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com) [mailto:_fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com) ]
> > On Behalf Of Tom_Downey
> > Sent: 15 March 2011 05:18 PM
> > To: _fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com)
> > Subject: [fairchildclub] Re: Should I part it out?
> >
> >
> >
> > Geoff, Thank you very much. I'm going to wait to the last moment to move
> the
> > 24, I may get the engine back to together and install it before I must
> > vacate the hangar here.
> >
> > How is your aircraft? you been flying ? I still have the two foot peg
> > castings, they are for sale if you know any one who wants them.
> >
> > --- In _fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com) , "Geoff Guest" wrote:
> > >
> > > Tom;
> > > Hopefully with the encouragement and a little bit of help we can get
> you
> > settled in BVS. You helped us several years ago with the cast aluminum
> foot
> > pegs for our C8E gear legs and it sounds like you could use a hand now.
> I'm
> > just north of you in White Rock, BC and only a couple of hours away. We
> can
> > relocate your "24" to Skagit. We've moved two C8Es to BC by road, one
> from
> > California, the other from Pennsylvania, and a Murphy Rebel from
> Squamish to
> > Pitt Meadows so 30 miles should be a breeze. We've probably got help at
> the
> > Skagit end as well so let me know what and when you need it.
> > >
> > > Geoff Guest
> > >
> > > ----- Original Message -----
> > > From: Tom_Downey
> > > To: _fairchildclub@yahoogroups.com_
> (mailto:fairchildclub@yahoogroups.com)
> > > Sent: Sunday, March 13, 2011 9:49 PM
> > > Subject: [fairchildclub] Should I part it out?
> > >
> > >
> > >
> > > I have lost my hangar at OKH and have a new on at BVS, the engine is
> off
> > the 24, so I must remove the wings and horizontal so that it can be
> > trailered and taken to BVS.
> > >
> > > should I just sell it as parts, take the loss and run. ?
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > ----------------------------------------------------------
> > --
> > >
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG - www.avg.com
> > > Version: 9.0.872 / Virus Database: 271.1.1/3505 - Release Date:
> 03/13/11
> > 12:34:00
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> > _____
> >
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1204 / Virus Database: 1498/3508 - Release Date: 03/15/11
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

'

Stuart Burgess · Post by **Stuart Burgess** » Thu Mar 17, 2011 1:00 am

'Hi Tom

burgess@mweb.co.za

Cheers

Stuart

From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
On Behalf Of Tom_Downey
Sent: 16 March 2011 05:12 PM
To: fairchildclub@yahoogroups.com
Subject: [fairchildclub] Re: Should I part it out?

$100 for the pair, send me a e-mail and 'll send pictures, these are for
the step forward of the gear leg on a C8C gear leg.

--- In fairchildclub@yahoogroups.com, "Stuart Burgess" wrote:
>
> Hi Tom
>
>
>
> What would you be asking for the footpeg castings?
>
>
>
> Regards
>
>
>
> Stuart
>
>
>
> From: fairchildclub@yahoogroups.com [mailto:fairchildclub@yahoogroups.com]
> On Behalf Of Tom_Downey
> Sent: 15 March 2011 05:18 PM
> To: fairchildclub@yahoogroups.com
> Subject: [fairchildclub] Re: Should I part it out?
>
>
>
> Geoff, Thank you very much. I'm going to wait to the last moment to move
the
> 24, I may get the engine back to together and install it before I must
> vacate the hangar here.
>
> How is your aircraft? you been flying ? I still have the two foot peg
> castings, they are for sale if you know any one who wants them.
>
> --- In fairchildclub@yahoogroups.com, "Geoff Guest" wrote:
> >
> > Tom;
> > Hopefully with the encouragement and a little bit of help we can get you
> settled in BVS. You helped us several years ago with the cast aluminum
foot
> pegs for our C8E gear legs and it sounds like you could use a hand now.
I'm
> just north of you in White Rock, BC and only a couple of hours away. We
can
> relocate your "24" to Skagit. We've moved two C8Es to BC by road, one from
> California, the other from Pennsylvania, and a Murphy Rebel from Squamish
to
> Pitt Meadows so 30 miles should be a breeze. We've probably got help at
the
> Skagit end as well so let me know what and when you need it.
> >
> > Geoff Guest
> >
> > ----- Original Message -----
> > From: Tom_Downey
> > To: fairchildclub@yahoogroups.com
> > Sent: Sunday, March 13, 2011 9:49 PM
> > Subject: [fairchildclub] Should I part it out?
> >
> >
> >
> > I have lost my hangar at OKH and have a new on at BVS, the engine is
off
> the 24, so I must remove the wings and horizontal so that it can be
> trailered and taken to BVS.
> >
> > should I just sell it as parts, take the loss and run. ?
> >
> >
> >
> >
> >
> >
> >
>
----------------------------------------------------------------------------
> --
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.872 / Virus Database: 271.1.1/3505 - Release Date:
03/13/11
> 12:34:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
> _____
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3508 - Release Date: 03/15/11
>
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

Yahoo! Groups Links

_____

No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1204 / Virus Database: 1498/3511 - Release Date: 03/16/11

[Non-text portions of this message have been removed]

'