Re: Tail Wheel Shimmy - Attempt #2

[Buell Powell]

'Hi Jim,
Congratulations!
Thanks - I still have a long way to go so I will wait until
you get back. What year is your Fairchild? Is it a UC61? I am still looking
for an instrument panel. The part that drops down on the one that I need is
about 8"across and rrops down about 1' or 2".
Let me know if you are looking for more parts I have located a few parts in
my search and will be glad to let you know where to find them.
Buell

----- Original Message -----
From: "james chybicki"
To:
Sent: Thursday, June 12, 2003 7:56 AM
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2


> Hi Buell-
> I have 2 drag links, and possiblly an extra Strut. I
> will need to check that. I am off onto my Honeymoon
> for the next 2 weeks, so if you can wait till early
> July, please do.
> Jim
> P.S. did you ever find an instrument Bulkhead???
> I am still looking. I have the flat bottom version,
> but I need the type that has a drop down in the
> middle.
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
> http://calendar.yahoo.com
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

[Airy-Hugues Millet]

'The sure fire solution is to stay away

>from hard surface!
>
>

I fully agree...

...but it quite hard nowadays, when you are invited on military airbase to
ask them for a grass runway!!

))

Airy

_________________________________________________________________
Trouvez l'âme soeur sur MSN Rencontres ! http://g.msn.fr/FR1000/9551'

[Curt Kinchen]

'I also noted a small improvemente with the Russ conversion(on a PT),
but the real answer is as everyone has noted. Get as many of the
mating parts as tight as you can.

Also, regarding the Russ conversion, easiest thing to do is send him
your tailwheel, especially if you have a spare. There are a lot of
different ones floating around out there.

Curt Kinchen


--- In fairchildclub@yahoogroups.com, Jamie Treat
wrote:

> Airy-Hugues,
>
> Still using Ribbed and Smooth Contour. Mine was Ribbed, now worn

smooth. I find no difference between the two as for shimmy. The only
source I have been using is Desser. Also pick up a old tire that is
serviceable now and then.

>
> Talked to Charlie Webb at Sun-N-Fun, he just converted to the Russ

Adapter rings and modern tire. He still has a little shimmy now and
then, but better. Also before you purchase the rings, Call Russ and
give him your dimensions of the wheel, minor difference between P/Ns.

>
> Jamie
>
> ----- Original Message -----
> From: Airy-Hugues Millet
> To: fairchildclub@yahoogroups.com
> Sent: Wednesday, June 11, 2003 12:31 PM
> Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2
>
>
>
> . If the tailwheel is clean and within factory tolerance, shimmy

will be

> nil. I maintain 4 F-24's, none of them have a shimmy. I also land

my F-24 at

> around 80mph at 7000ft alt plus density. Fast moving, some times

with a rear

> load and more fuel, I cannot keep the tail off as long as I want,

still no

> shimmy.
> >
> >Jamie S. Treat
>
> Hy Jamie,
>
> can precise if the 4 F24 you are running are SC10 tires and

wheels equiped

> or not?
>
> I guess shimmy is a commitment of SC10 + working plays (becoming

gap!!)+ an

> original geometry nearby to enhance those effects!
>
> For example, on our F24 with 10 inches tire, but from an old new

stock, with

> small ribs on its profile it didn't had shimmy, but as soon as

ribs let the

> place to a flat surface (perfectly smooth contours), we begin to

met shimmy

> phenomenom, and as well as the tire begin to be overworn, the

shimmy

> increase at each landing on hard surface!!
>
> ...will be interested in any experience...before choosing between

rrruss

> aircraft adaptor kit or finding a brand new tire ( does anybody

know an

> other company than desser, able to get STOMIL tires (oval ribs),

as it is a

> polish company from the michelin group!!)
>
> Airy-H. MILLET
>
> _________________________________________________________________
> Trouvez l'âme soeur sur MSN Rencontres !

http://g.msn.fr/FR1000/9551

>
>
> Yahoo! Groups Sponsor
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of

Service.

>
>
>
> [Non-text portions of this message have been removed]

'

[james chybicki]

'HI Buell
I am back from the Honeymoon in Hawaii... It was
tough, but we got through it nicely! I went out to the
hangar Saturday, and I actually have 2 extra drag
links.
Our baby is a true UC-61K, built in 1943 for USAAF
#43-14964 sent to the RAF as HB-690 (24 volt). We have
the extremely rare british installed full swivel
flexjoint tailwheel.
I also need the dropdown instrument panel. I have one
from a '46, but it is the straight bottom.
I will contact you offline on the shipping and prices.
Any idea where I can pick up a Ranger starter????
JIM

--- Buell Powell wrote:

> Hi Jim,
> Congratulations!
> Thanks - I still have a long way to
> go so I will wait until
> you get back. What year is your Fairchild? Is it a
> UC61? I am still looking
> for an instrument panel. The part that drops down on
> the one that I need is
> about 8"across and rrops down about 1' or 2".
> Let me know if you are looking for more parts I have
> located a few parts in
> my search and will be glad to let you know where to
> find them.
> Buell
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, June 12, 2003 7:56 AM
> Subject: Re: [fairchildclub] Tail Wheel Shimmy -
> Attempt #2
>
>
> > Hi Buell-
> > I have 2 drag links, and possiblly an extra Strut.
> I
> > will need to check that. I am off onto my
> Honeymoon
> > for the next 2 weeks, so if you can wait till
> early
> > July, please do.
> > Jim
> > P.S. did you ever find an instrument Bulkhead???
> > I am still looking. I have the flat bottom
> version,
> > but I need the type that has a drop down in the
> > middle.
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Calendar - Free online calendar with sync
> to Outlook(TM).
> > http://calendar.yahoo.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com'

[John Berendt]

'James

Contact Bill Mitchell at (814)274-9394, Bill has a E-80 Starter for sale,He
also has a lot of Ranger parts for sale.

John Berendt

----- Original Message -----
From: "james chybicki"
To:
Sent: Tuesday, July 08, 2003 8:06 AM
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2


> HI Buell
> I am back from the Honeymoon in Hawaii... It was
> tough, but we got through it nicely! I went out to the
> hangar Saturday, and I actually have 2 extra drag
> links.
> Our baby is a true UC-61K, built in 1943 for USAAF
> #43-14964 sent to the RAF as HB-690 (24 volt). We have
> the extremely rare british installed full swivel
> flexjoint tailwheel.
> I also need the dropdown instrument panel. I have one
> from a '46, but it is the straight bottom.
> I will contact you offline on the shipping and prices.
> Any idea where I can pick up a Ranger starter????
> JIM
>
> --- Buell Powell wrote:
> > Hi Jim,
> > Congratulations!
> > Thanks - I still have a long way to
> > go so I will wait until
> > you get back. What year is your Fairchild? Is it a
> > UC61? I am still looking
> > for an instrument panel. The part that drops down on
> > the one that I need is
> > about 8"across and rrops down about 1' or 2".
> > Let me know if you are looking for more parts I have
> > located a few parts in
> > my search and will be glad to let you know where to
> > find them.
> > Buell
> > ----- Original Message -----
> > From: "james chybicki"
> > To:
> > Sent: Thursday, June 12, 2003 7:56 AM
> > Subject: Re: [fairchildclub] Tail Wheel Shimmy -
> > Attempt #2
> >
> >
> > > Hi Buell-
> > > I have 2 drag links, and possiblly an extra Strut.
> > I
> > > will need to check that. I am off onto my
> > Honeymoon
> > > for the next 2 weeks, so if you can wait till
> > early
> > > July, please do.
> > > Jim
> > > P.S. did you ever find an instrument Bulkhead???
> > > I am still looking. I have the flat bottom
> > version,
> > > but I need the type that has a drop down in the
> > > middle.
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Calendar - Free online calendar with sync
> > to Outlook(TM).
> > > http://calendar.yahoo.com
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

[Buell Powell]

'Hi Jim,
I bought a starter from Jada at Smallwood
Aviation(903-848-4461-Canton Texas)They have several 12volts but I don't
know about the 24volt. They will also change the gear drive from 12 to 3 if
you need a 3 tooth. They are used and they check to see if they work before
they send them out but they don't rebuild them. The guy that told me about
them bought one a couple of years ago and hasn't had any trouble with it.
If you want to call me about the drag link my phone no is
830-935-2294. Keep me posted on any parts you need and I would be glad to
check while I am looking for stuff for my Fairchild. If I have any luck on
instrument panels I'll be sure to let you know.
Buell

----- Original Message -----
From: "james chybicki"
To:
Sent: Tuesday, July 08, 2003 8:06 AM
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2


> HI Buell
> I am back from the Honeymoon in Hawaii... It was
> tough, but we got through it nicely! I went out to the
> hangar Saturday, and I actually have 2 extra drag
> links.
> Our baby is a true UC-61K, built in 1943 for USAAF
> #43-14964 sent to the RAF as HB-690 (24 volt). We have
> the extremely rare british installed full swivel
> flexjoint tailwheel.
> I also need the dropdown instrument panel. I have one
> from a '46, but it is the straight bottom.
> I will contact you offline on the shipping and prices.
> Any idea where I can pick up a Ranger starter????
> JIM
>
> --- Buell Powell wrote:
> > Hi Jim,
> > Congratulations!
> > Thanks - I still have a long way to
> > go so I will wait until
> > you get back. What year is your Fairchild? Is it a
> > UC61? I am still looking
> > for an instrument panel. The part that drops down on
> > the one that I need is
> > about 8"across and rrops down about 1' or 2".
> > Let me know if you are looking for more parts I have
> > located a few parts in
> > my search and will be glad to let you know where to
> > find them.
> > Buell
> > ----- Original Message -----
> > From: "james chybicki"
> > To:
> > Sent: Thursday, June 12, 2003 7:56 AM
> > Subject: Re: [fairchildclub] Tail Wheel Shimmy -
> > Attempt #2
> >
> >
> > > Hi Buell-
> > > I have 2 drag links, and possiblly an extra Strut.
> > I
> > > will need to check that. I am off onto my
> > Honeymoon
> > > for the next 2 weeks, so if you can wait till
> > early
> > > July, please do.
> > > Jim
> > > P.S. did you ever find an instrument Bulkhead???
> > > I am still looking. I have the flat bottom
> > version,
> > > but I need the type that has a drop down in the
> > > middle.
> > >
> > >
> > >
> > >
> > > __________________________________
> > > Do you Yahoo!?
> > > Yahoo! Calendar - Free online calendar with sync
> > to Outlook(TM).
> > > http://calendar.yahoo.com
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > fairchildclub-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

'

[TED CAMP]

'hello Jim , could you give me a call My # is 734-502-6428 I'm interested in a drag link thank you. Ted camp----- Original Message -----
From: james chybicki
Sent: Tuesday, July 08, 2003 9:06 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2

HI Buell
I am back from the Honeymoon in Hawaii... It was
tough, but we got through it nicely! I went out to the
hangar Saturday, and I actually have 2 extra drag
links.
Our baby is a true UC-61K, built in 1943 for USAAF
#43-14964 sent to the RAF as HB-690 (24 volt). We have
the extremely rare british installed full swivel
flexjoint tailwheel.
I also need the dropdown instrument panel. I have one
from a '46, but it is the straight bottom.
I will contact you offline on the shipping and prices.
Any idea where I can pick up a Ranger starter????
JIM

--- Buell Powell wrote:

> Hi Jim,
> Congratulations!
> Thanks - I still have a long way to
> go so I will wait until
> you get back. What year is your Fairchild? Is it a
> UC61? I am still looking
> for an instrument panel. The part that drops down on
> the one that I need is
> about 8"across and rrops down about 1' or 2".
> Let me know if you are looking for more parts I have
> located a few parts in
> my search and will be glad to let you know where to
> find them.
> Buell
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, June 12, 2003 7:56 AM
> Subject: Re: [fairchildclub] Tail Wheel Shimmy -
> Attempt #2
>
>
> > Hi Buell-
> > I have 2 drag links, and possiblly an extra Strut.
> I
> > will need to check that. I am off onto my
> Honeymoon
> > for the next 2 weeks, so if you can wait till
> early
> > July, please do.
> > Jim
> > P.S. did you ever find an instrument Bulkhead???
> > I am still looking. I have the flat bottom
> version,
> > but I need the type that has a drop down in the
> > middle.
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Calendar - Free online calendar with sync
> to Outlook(TM).
> > http://calendar.yahoo.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com

Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]'

[robert hensarling]

'-----Original Message-----
From: TED CAMP
To: fairchild
Date: Tuesday, July 08, 2003 3:08 PM
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2

I would like info on the links also Buell, thanks, and the extra strut.
Robert Hensarling
rhrocker@hilconet.com


hello Jim , could you give me a call My # is 734-502-6428 I'm interested in a drag link thank you. Ted camp----- Original Message -----
From: james chybicki
Sent: Tuesday, July 08, 2003 9:06 AM
To: fairchildclub@yahoogroups.com
Subject: Re: [fairchildclub] Tail Wheel Shimmy - Attempt #2

HI Buell
I am back from the Honeymoon in Hawaii... It was
tough, but we got through it nicely! I went out to the
hangar Saturday, and I actually have 2 extra drag
links.
Our baby is a true UC-61K, built in 1943 for USAAF
#43-14964 sent to the RAF as HB-690 (24 volt). We have
the extremely rare british installed full swivel
flexjoint tailwheel.
I also need the dropdown instrument panel. I have one
from a '46, but it is the straight bottom.
I will contact you offline on the shipping and prices.
Any idea where I can pick up a Ranger starter????
JIM

--- Buell Powell wrote:

> Hi Jim,
> Congratulations!
> Thanks - I still have a long way to
> go so I will wait until
> you get back. What year is your Fairchild? Is it a
> UC61? I am still looking
> for an instrument panel. The part that drops down on
> the one that I need is
> about 8"across and rrops down about 1' or 2".
> Let me know if you are looking for more parts I have
> located a few parts in
> my search and will be glad to let you know where to
> find them.
> Buell
> ----- Original Message -----
> From: "james chybicki"
> To:
> Sent: Thursday, June 12, 2003 7:56 AM
> Subject: Re: [fairchildclub] Tail Wheel Shimmy -
> Attempt #2
>
>
> > Hi Buell-
> > I have 2 drag links, and possiblly an extra Strut.
> I
> > will need to check that. I am off onto my
> Honeymoon
> > for the next 2 weeks, so if you can wait till
> early
> > July, please do.
> > Jim
> > P.S. did you ever find an instrument Bulkhead???
> > I am still looking. I have the flat bottom
> version,
> > but I need the type that has a drop down in the
> > middle.
> >
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! Calendar - Free online calendar with sync
> to Outlook(TM).
> > http://calendar.yahoo.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com

Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]'