Ranger Engines

Thekortas@aol.com · Post by **Thekortas@aol.com** » Wed Jan 30, 2002 8:40 pm

'There are a couple of Ranger engines for sale under the "Fairchild" heading
on e-bay! Looks like the aution sale date is Feb. 6 if anyone is interested.'

Michael Denest · Post by **Michael Denest** » Thu Jan 31, 2002 6:20 am

'Guys,
Before you get gaga and throw bids, remember what the
dog said. "ruff, ruff, ruff"!

Mike

--- Thekortas@aol.com wrote:

> There are a couple of Ranger engines for sale under
> the "Fairchild" heading
> on e-bay! Looks like the aution sale date is Feb. 6
> if anyone is interested.
>

__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com'

Thekortas@aol.com · Post by **Thekortas@aol.com** » Thu Jan 31, 2002 8:29 am

'Hey Mike, If anyone is gonna get involved with an auction they know they're taking it upon themselves to decide what they're lookin at and how much they want the stuff. Nobody said the engines looked like jewels. They are what they are. After all, isn't this board supposed to be here to share Fairchild info. for the good of the group? Somebody may want those engines!'

Michael Denest · Post by **Michael Denest** » Thu Jan 31, 2002 1:15 pm

'Let me say it like this. I have seen enough Rangers
that look like these end up scrapped. Don't expect to
make these things jewels. I have done enough of these
engines to know what I am talking about. I can't take
something like this and make it like new, the parts
are not available. Hey fellas, this list if for
information and I believe I gave GOOD INFORMATION!
BEWARE OF WHAT YOU BUY AT AUCTION!
Sure, someone can buy them but don't expect them to
measure to specs. You may get lucky, you may not. I
have scrapped I don't remember how many cylinders I
replaced that leaked at the heads even though they
measured to standard dimensions. It costs $15,000.00
to make an airworthy Ranger engine and I can't see
wasting good money on unuseable equipment. Then you
get pissed off at me for a bad engine. Forget about
them!

Mike

--- Thekortas@aol.com wrote:

> Hey Mike, If anyone is gonna get involved with an
> auction they know they're taking it upon themselves
> to decide what they're lookin at and how much they
> want the stuff. Nobody said the engines looked like
> jewels. They are what they are. After all, isn't
> this board supposed to be here to share Fairchild
> info. for the good of the group? Somebody may want
> those engines!
>
>

__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com'

dfwsfug · Post by **dfwsfug** » Thu Jan 31, 2002 7:58 pm

'Can anyone tell from the picture if that's the large hub on the
second Ranger? Where looking for a large hub.
CE

--- In fairchildclub@y..., Thekortas@a... wrote:
> There are a couple of Ranger engines for sale under the "Fairchild"
heading
> on e-bay! Looks like the aution sale date is Feb. 6 if anyone is
interested.

'

dfwsfug · Post by **dfwsfug** » Thu Jan 31, 2002 7:59 pm

'--- In fairchildclub@y..., "dfwsfug" wrote:

> Can anyone tell from the picture if that's the large hub on the
> second Ranger? Where looking for a large hub.
> CE

http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1696860891'

Cy Galley · Post by **Cy Galley** » Thu Jan 31, 2002 9:11 pm

'If you know the dimensions, e-mail the seller and ask.

Cy Galley, TC - Chair, Emergency Aircraft Repair, Oshkosh

Editor, EAA Safety Programs
cgalley@qcbc.org or experimenter@eaa.org

Always looking for articles for the Experimenter

----- Original Message -----
From: "dfwsfug"
To:
Sent: Thursday, January 31, 2002 7:59 PM
Subject: [fairchildclub] Re: Ranger Engines

--- In fairchildclub@y..., "dfwsfug" wrote:
> Can anyone tell from the picture if that's the large hub on the
> second Ranger? Where looking for a large hub.
> CE
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1696860891

To unsubscribe from this group, send an email to:
fairchildclub-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

'

Marge & John Berendt · Fri Feb 01, 2002 8:35 am

'If the hub you are lookingfor is the large military one give me a call at
507-263-2414, I have one for sale.
John Berendt

----- Original Message -----
From: "dfwsfug"
To:
Sent: Thursday, January 31, 2002 7:59 PM
Subject: [fairchildclub] Re: Ranger Engines

> --- In fairchildclub@y..., "dfwsfug" wrote:
> > Can anyone tell from the picture if that's the large hub on the
> > second Ranger? Where looking for a large hub.
> > CE
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1696860891
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

'

dfwsfug · Post by **dfwsfug** » Fri Feb 01, 2002 11:00 am

'Cy,
Thanks for the heads up will do. We are inquiring for off-line pilot.
The hub is 15 spline type.
CE

--- In fairchildclub@y..., "Cy Galley" wrote:
> If you know the dimensions, e-mail the seller and ask.
>
> Cy Galley, TC - Chair, Emergency Aircraft Repair, Oshkosh
>
> Editor, EAA Safety Programs
> cgalley@q... or experimenter@e...
>
> Always looking for articles for the Experimenter
>
> ----- Original Message -----
> From: "dfwsfug"
> To:
> Sent: Thursday, January 31, 2002 7:59 PM
> Subject: [fairchildclub] Re: Ranger Engines
>
>
> --- In fairchildclub@y..., "dfwsfug" wrote:
> > Can anyone tell from the picture if that's the large hub on the
> > second Ranger? Where looking for a large hub.
> > CE
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1696860891
>
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> fairchildclub-unsubscribe@y...
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

'

dfwsfug · Post by **dfwsfug** » Fri Feb 01, 2002 11:03 am

'John,
Will pass on. The hub querry is from an off-line pilot.
Thanks.
CE
--- In fairchildclub@y..., "Marge & John Berendt"
wrote:

> If the hub you are lookingfor is the large military one give me a

call at

> 507-263-2414, I have one for sale.
> John Berendt
> ----- Original Message -----
> From: "dfwsfug"
> To:
> Sent: Thursday, January 31, 2002 7:59 PM
> Subject: [fairchildclub] Re: Ranger Engines
>
>
> > --- In fairchildclub@y..., "dfwsfug" wrote:
> > > Can anyone tell from the picture if that's the large hub on the
> > > second Ranger? Where looking for a large hub.
> > > CE
> > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1696860891
> >
> >
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > fairchildclub-unsubscribe@y...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >

'